Mocka Minka House User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Minka House
Thank you for purchasing Minka House. Please follow the
manufacturer’s assembly instructions in detail.
HARDWARE SUPPLIED
vertical
beams x4
horizontal
beams x3
end
screws x6
fabric
cover x1
C D
W ARNING! • Due to small parts, the Minka House
should be assembled by an adult.
• Keep away from fire.
A B
Recommended age is 18 months +

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Minka House
1 2
Lay out 2x vertical beams (A) and 1x horizontal beam (B) as shown, and secure
with 2x end screws (C) to make one side of the Minka House. Repeat
these steps to assemble the other side.
Gather each side in the position shown above.
A
A
A
A
C
C
A
A
B
B
A
C
C
A
B
B

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Minka House
3 4
Thread 1x horizontal beam (B) through the top seam of the fabric cover
(D) as shown.
Attach the horizontal beam (B) to the rest of the frame as shown, and
secure with 2x end screws (C).
C
B
C
B

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Minka House
5 6
Ensure the fabric covers the vertical beams. Secure the bottom of the fabric on
the horizontal beams.
You’re done, enjoy!