Mocka Minka House User manual

Minka House
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C D
Hardware Supplied
WARNING! • Due to small parts, the Minka House
should be assembled by an adult.
• Keep away from fire. Recommended age is 18 months +
A B
vertical
beams x4
horizontal
beams x3
end
screws x6
fabric
cover x1
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Minka House
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Lay out 2x vertical beams (A) and 1x horizontal beam (B) as shown,
and secure with 2x end screws (C) to make one side of the Minka
House. Repeat these steps to assemble the other side.
Gather each side in the position shown above.
C
A
B
A
A
AB
B
B
A
A
AA
C
C
C

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Minka House
4
Thread 1x horizontal beam (B) through the top seam of the fabric cover
(D) as shown.
Attach the horizontal beam (B) to the rest of the frame as shown, and
secure with 2x end screws (C).
C
C
D
BB

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Minka House
6
Ensure the fabric covers the vertical beams. Secure the bottom of the
fabric on the horizontal beams.
You’re done, enjoy!