Mocreo ClipR User manual

Package
Qu ick St art G uid e
① ② ③ ④
MOCREO ClipR Blue tooth Receiver
Micro USB Cable
3.5mm Audio Cable
Quick Start Guide
No. Name Quantity
1 1
2 1
3 1
4 1
User ’s Guide
-8 -
-11- -12-
-7 -
-1 0-
Warranty
MOCREO products are protected with 18 months manufacturer
warranty. Photos of the product may not reflect the actual content.
MOCREO MAKES NO OTHER EXPRESS WARRANTIES.
Wireless Blue tooth Receiver with NFC
MOCREO ClipR
Music does not play in the receiver
Make sure your phone or other device is paired with the receiver. You
may have to restart the media player and select to use the receiver.
Make sure the correct music source is selected.
The receiver turns off automatically
The batter y level is too low. The receiver beeps approximately 10
minutes before it turns off. Charge the receiver.
Unexpected behavior
Restart the receiver.
No connection to your phone
Make sure the receiver is charged and within range of the phone. A
maximum distance of 10 meters (33 feet), with no solid objects in
between, is recommended. Check the Blue tooth setting in the phone,
and reset if necessar y. Pair the receiver with the phone again.
I cannot answer a call
Make sure your phone supports the Blue tooth hands free profile.
Trouble shooting
Technical Specifications
Blue tooth version V4.1
1. Hands-free profile (HFP)
2. Advanced Audio Distribution Profile
(A2DP)
3. Audio Video Remote Control Profile
(AVRCP)
Blue tooth Profiles
4. Headset Profile (HSP)
Standby time up to 200 hours
Talk time up to 7 hours
Working duration up to 6 hours
Battery 3.7V/120 mAh
Dimensions 1.34 x 1.34 x 0.47 in (34 x 34 x 12 mm)
Net Weight 0.03 lb (12g)
Specifications are subject to be changed and improved without notice.

With the stereo Blue tooth receiver ClipR, you can control incoming
and outgoing phone calls while you listen to music in stereo from
your phone or from other devices. Such a device must support Blue tooth,
for exam p le, a compu ter or a portable music player. During a call,
the music pauses automatically and star ts playing again when the
call ends.
Introduction
-2 - -3 --1 -
Overview
-4 - -5 - -6 -
Charge Your Receiver
Highly recommend to charge your receiver 100% before usage. It
takes approximately 2~3 hours to charge the receiver from 0% ~
100% for the first time.
1. Using computer: connect the micro USB cable to the receiver power
connector and the standard USB por t to computers USB port.
2. Using an electrical outlet: connect the micro USB cable to the
receiver and the standard USB port to a DC 5V adapter.
3. Indicator status:
a. RED = charging
b. OFF = charge completed
1. Power ON: Press and hold button until the LED flashes in red ①
and blue alternatively and a beep sound heard.
2. Power OFF: Press and hold button until the LED flashes in blue ①
and a beep sound heard then release.
Turn ON / OFF the Receiver
1.Make sure your mobile phone is Blue tooth-enabled and the Blue
tooth function is activated.
2.Ensure the receivers is turned off.
3.Receiver: Press and hold the MFB button until the LED indicator ①
flashes in red and blue alternatively.
4.Phone: Scan for Blue tooth devices, then select "MOCREO ClipR "in
the available devices list.
5.Follow the pairing instructions that appear on your phone. If a
password is required, enter "0000".
6.Go back to your mobile phones main menu. For some mobile
phone, when they are re-started, the receiver will be connected with
the mobile phone automatically.
①
⑥
③
④
②
⑦
⑧
⑨
1. Multi-functional button
Power on/off, play / pause / receive a call, pairing mode
2. Track backward / Volume
3. Micro USB jack
4. Track forward / Volume
5. NFC detection area
6. LED indicator
7. Built-in microphone
8. 3.5mm AUX line out
9. Clip
⑤
Pair the Receiver with Your Phone
You can pair the receiver with your phone manually or using NFC.
After successful pairing, the receiver connects automatically to the
phone as soon as the receiver is turned on and within range.
To Manually Pair the Receiver with Your Phone
1.Make sure that the NFC function of you mobile phone is turned on
and that the phone screen is active.
2.Turn on the receiver.
3.Place your phone over the receiver so that the NFC detection area
of each device touches the other.
4.Follow the pairing instructions that appear on your phone. If a
password is required, enter "0000".
Note:
1.ClipR will automatically be turned off if no paired device is in range
after 5 minutes.
2.All the pairing information will be stored even after the power is off.
To Pair the Receiver with Your Mobile Phone via NFC
In standby mode, press button , and simultaneously until the ① ② ④
LED flashes in red and blue alternatively and a beep sound is heard,
then release your hand.
Note:
Reset the receiver if it behaves unexpectedly. Resetting the receiver
will remove all information about paired devices.
Reset the Receiver
Wearing Instructions
Although the clip is fixed and cannot be rotated, the device can be
turned left or right depending on how it is clipped to your garment.
To get the best performance from a Blue tooth receiver when using it
outdoors, it is recomme nded that you carr y your phone on the
same side of your body as the receiver unit.
Call Handing
With a built-in microphone, ClipR enables you to receive and make
calls while listening to music when paired with a smartphone.
1.Answer a call
The LED flashes in blue and the incoming call signal Ding-Dong will
be heard. Press and release the button once to answer a call.①
2.End a call
Press and release the button once during the call.①
3.Decline a call
Press and hold the button and release it after a long beep. The ①
incoming call is declined.
4.To mute the microphone during a call
Press the button and simultaneously and release it until a Ding-① ②
Dong sound is heard to mute the microphone during a call. And
repeat above procedure to cancel the mute.
5.Last dialed number re-dial
Quick double press and release the button to redial the last ①
number dialed.
6.To transfer a call
Press and hold the button for 3 seconds during a call to transfer a ①
call to mobile phone. And repeat above procedure to transfer the
call from mobile phone to the receiver.
Listening to music
To listen to music
1. Open the media player in your phone.
2. Press button (1) to play the music on the receiver. To pause the music,
press button (4) again.
To move between tracks
When you are listening to music, press button (2) and (4) for tracking
control.
To control the volume
Press and hold the button (2) and (4) to decrease and increase the
volume when listening to music.