Mod-Arte Evoke EV03-70-110 User manual

Item Code - EV03-70-110
Assembly Instructions

ATTENTION: Is your product damaged or missing assembly instructions?
DO NOT RETURN!!!PLEASE READ THE FOLLOWING!!!
For Replacement / Missing Parts: www.modarte.com/parts
For Assembly Instructions and Assembly Videos:https://modarte.com/assembly/
All other enquiries, please send email to: [e-mail] or 973-264-1228
IF YOU ARE MISSING PARTS, OR PARTS ARRIVED DAMAGED:
For fastest service, please contact us and we will mail you replacements parts the next business day. To
request replacement parts, please fill out a parts request form on our website at
www.modarte.com/parts, or email us at [e-mail]. DO NOT RETURN TO THE RETAILER.
CUSTOMER CARE
For any other customer service enquiries, please feel free to reach out to us:
[e-mail] or 973-264-1228
Thank You!

Approximate time : 30 Minutes
Surface should be uniform during assembly process.
While door assembly ,ensure gap on all Four sides are equal.
Mallet can be used to drive in dowel.

8
Minifix Twister
Minifix Roster
Minifix Cap
Magnetic Catcher
with Removal Plate
I
O
8x13mm
5x10mm
Minifix Socket
PVC Socket
24 pcs
32 pcs
Note: PVC SLEEVE ,MINIFIX SOCKET AND PART(G) ALREADY FIXED.
IN SOME CASES MINIFIX ROSTER ARE ALREADY FIXED.
36
Pan Head
PMagnetic Catcher
Screw 08 pcs

Parts List
SL3
SL6
SL7
SL4
SL10
SL5
SL8
SL3
SL10
SL9
SL1
SL13
SL14
SL18
SL12
SL11
SL2
SL15
SL16
SL17
SL17
SL13

Step 1
H
Secure the Magnetic Catcher (H) with Screw (P) and Minifix Twister (B) to the Top Panel (SL 1).
Remove Magnetic Catcher Plate (H) for further use.
SL1
P
P

SL
SL
Secure Minifix Twister (B) with screwdriver into part (SL6,SL7,SL8,SL9),
Insert wooden dowel (A) into part (SL6,SL7,SL8,SL9).
Dowels(A) fix only in blind holes.
SL
SL
SL SL

SL2
Insert wooden Dowel(A) into part (Sl2).
Dowels(A) fix only in blind holes.

SL SL
SL SL
Insert Wooden dowel (A) into (SL3,SL4,SL5) and Minifix twisters into part (SL3)
Dowels(A) fix only in blind holes.

SL
SL SL
Attach parts (SL4,SL5,SL10) with Minifix Roster(C)

Attach part (SL3) to part (SL6,SL8,SL9) with Minifix Roster
SL
SL
SL
SL
SL
SL

Attach part (SL17) to part (SL2) using bolt(E) with Screw driver.
SL
SL
SL

SL
SL
SL
Attach part (SL8,SL9) to part (SL 2), then insert and secure Minifix Roster ( C)
to part (SL 2) to lock it.

SL
SL
SL
Attach part (SL6,SL7) to part (SL 2), then insert and secure Minifix Roster ( C)
to part (SL 2) to lock it.

SL
SL
SL
Attach part (SL 2) to parts(SL 4,SL 5) using bolt (E) with Screw driver.

SL
SL
SL
SL
SL
SL
SL
SL

Insert part (SL 1) into part (SL3,SL4,SL5), then insert and
secure Minifix Roster ( C) to part (SL3,SL4,SL5).
SL
SL
SL
SL
SL

Place Minifix Cap (D) over holes as per diagram.

F
F
F
F
F
F
FF
F
F
F
F
SL
SL
SL
SL
F
Insert shelf support pin (F) into parts (SL3,SL4,SL5)

Then place shelf (SL11,SL12,SL18) on top of support pin(F).
SL
SL
SL
SL
SL
SL
SL