Modern Forms TipTop FH-W2004 User manual

TipTop
Installation Instructions
works with the
Google Assistant
Compatible with

Please read and save these
instructions before installation

For all questions about your ceiling fan please read
all included instructions, installation procedures,
troubleshooting guidelines and warranty information
before starting installation
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our trained technical sta at:
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at modernforms.com
Email: [email protected]
1-866-810-6615 option 01-866-810-6615 option 1
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
02 General Inquiries 02 Fan Support
DO NOT RETURN TO STORE

To reduce the risk of electric shock, ensure electricity has been
turned o at the circuit breaker before beginning.
All wiring must be in accordance with the National Electrical Code
“ANSI/NFPA 70” and local electrical codes. Electrical installation
should be performed by a licensed electrician.
The fan must be mounted with a minimum of 7 ft. (2.1m)
clearance from the trailing edge of the fan blades to the oor
and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to
the surrounding walls.
Never place objects in the path of the fan blades.
To avoid personal injury or damage to the fan and
other items, please be cautious when working around
or cleaning the fan.
To avoid electrical shock or damage to the motor or nish, do not
use water or chemicals when cleaning the fan or fan blades. A dry
cloth or lightly dampened cloth will be suitable for most cleaning.
After making electrical connections, spliced conductors should be
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box, and
the ungrounded conductor on the other side of the outlet box.
All set screws must be checked and re-tightened where
necessary before installation.
02 Safety Rules
For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/

WARNING: Do not install or use your fan if any part(s) is/are
damaged or missing. This product is designed for use only with
the supplied parts and/or accessories designated for use with this
product by Modern Forms. Substitution of parts or accessories not
designated for use with this product by Modern Forms could result
in personal injury or property damage and will void the warranty.
Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
WARNING: To reduce the risk of electric shock, this fan must
be installed and operated with the supplied wall control, or
controlled from the Modern Forms app or Wi-Fi Touch Panel
Wall Control (not included).
WARNING: Do not use power tools to assemble or install your fan.
Using power tools can result in improper assembly which can lead to
noise or fan damage,personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or
cleaning the fan.
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place.
Noise and fan damage can occur
WARNING: This appliance is not intended for use by young
children without supervision.
WARNING: To reduce the risk of re, electric shock, personal injury
or damage to the fan or other items, the outlet box and support
structure must be securely mounted and capable of reliably
supporting a minimum of 35 Ibs (15.9 kg). Use only UL/cUL listed
outlet boxes marked “FOR FAN SUPPORT.” Use only the screws and
washers provided with the outlet box.
CAUTION: Before assembling your fan, refer to the “Making
the Electrical Connections“ section. If you feel you do not have
enough wiring knowledge or experience, have your fan installed
by a licensed electrican.
NOTE: Before servicing or cleaning the fan, switch power o at
the circuit breaker.
02 Safety Rules

All Modern Forms Smart Fans are:
DC
MOTOR
WET
The Modern Forms app integrates seamlessly with smart home devices you already own.
02 Get Smart
works with the
Google Assistant
WALL CONTROL
F-WCBT-WT
Optional accessory
sold separately
6 fan speeds
Dims light to 1%
ON/OFF
FREE APP DOWNLOAD
Sync with our exclusive
Modern Forms app to
control fan speed, use
smart features like
Adaptive Learning,
create groups and
reduce energy costs
Quiet, reliable, and up to 70%
more ecient than AC fans
Durably nished and rated
for interior and exterior use
Wi-Fi and Bluetooth enabled
for exible control
Wet location-listed to the strictest
UL/cUL safety regulations
Compatible with our free
Modern Forms app
Coordinate with smart devices
for voice-activated control
WI-FI TOUCH PANEL
WALL CONTROL
F-TS-BK Black
F-TS-WT White
Optional accessory
sold separately
Full app control
REMOTE CONTROL
F-RCBT-WT White
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF

Package Contents
Mounting Options
Installing the Mounting Bracket
Attaching the Fan Blades
Adding the Decorative Trim Ring
Hanging the Fan
Making the Electrical Connections
Installing the Wall Control
Finishing the Installation
Installing the Trim Ring
Installing the Adapter Plate
Installing the LED Module
Controlling the Fan
Factory Reset
App Instructions
Accessories
9.
10.
10.
11.
12.
13.
14.
15.
17.
17.
18.
19.
21.
24.
25.
27.
4
7
8
9
10
11
11
12
13
14
15
16
5
5
6
Table of Contents
17

FH-W20048
Electrical tape
Phillips screwdriver Step ladder Wire cutters
03 Tools & Materials Required
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
HANGING WEIGHT: 17 lbs
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
MAC ID

9FH-W2004
NOTE: ** denotes nish code of fan
*** denotes blade sweep of fan
3
1
8
6
2
7
10
4
5
9Receiver
F-R3-2004-***
Fan Blade
RPL-F2004-***-BD-**
Decorative Trim Ring
RPL-F2004-TRIM-**
LED Module
F3IN-120V-R1-30
PC Shade
RPL-F2004-GLA
Safety Cable
6.5” x 19 x 2mm
Flat washer (1pcs)
Safety Cable
10 x 76mm
Pan head Phillips
wood screws (1pc)
Safety Cable
5.2 x 8.4 x1mm
Spring washer (1pc)
Hardware Bag
RPL-F2004-PARTS
Blade Screws
3/16” x 12mm
Phillips washer head
screws (10pcs)
Canopy Screws
3/16” x 15mm
Slotted pan head
screws (4pcs)
Luminaire Plate
8 x 1” Phillips Truss
Head Screws (1pc)
Motor Housing
Adapter Plate
Remote Control
F-RCBT-WT
Mounting Bracket
RPL-F2004-HGR
Package Contents 04

FH-W200410
1 2
05 Mounting Options Installing The Mounting Bracket
1. Remove 1 set screw from mounting bracket and set
aside for use in Finishing the Installation.
2. Pass supply wires through mounting bracket and
secure to outlet box.
Standard Ceiling Caution: To prevent electrical shock,
ensure electricity has been turned o
at the circuit breaker before beginning.
CAUTION: To prevent electrical shock, ensure electricity has been
turned o at the circuit breaker before beginning.
Mount to the outlet box as shown above.

11FH-W2004
3
Attaching the Fan Blades 06
1. Place blade on motor and secure with the blade attachment,
screws and washers.
2. Insert blades in slots, aligning with motor assembly holes.
3. Secure blades with blade attachment screws & washers.
4. Remove set screws from motor housing, install blade collector
ring (when applicable), and re-install screws.

FH-W200412
07 Adding the Decorative Trim Ring
4 5
1. Remove three screws from the top of the motor housing and
place the decorative trim ring on the body of fan housing as shown.
2. Reattach the motor housing by re-installing the three screws.

13FH-W2004
61. Remove 2 opposing screws and loosen the others.
2. Pass supply wires through mounting plate.
3. Lift motor assemby and hang it on the hook on the
mounting plate using one of the screw holes.
Hanging the Fan 08

FH-W200414
1. Connect the wires from fan to the corresponding wires on
the receiver.
2. Connect the wires from the outlet box to the corresponding
wires on the receiver.
NOTE: Follow wiring diagram found on the receiver hardware.
After making electrical connections, spliced connectors should be
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and
ungrounded connector on the other side of the outlet box.
WHITE (NEUTRAL)
OUTLET BOX
BLACK (HOT)
BLACK (“AC IN L”)
RED (TO MOTOR)
GRAY (TO MOTOR)
YELLOW (TO MOTOR)
YELLOW (MOTOR)
GRAY (MOTOR)
RED (MOTOR)
RECEIVER
GREEN (GROUND)
TO HANGER BALL
GREEN (GROUND)
TO HANGER BRACKET
GREEN (GROUND)
WHITE (FOR LIGHT)
WHITE (FOR LIGHT)
BLUE (FOR LIGHT)
BLUE (FOR LIGHT)
WHITE (“AC IN N”)
GREEN (GROUND)
7
09 Making the Electrical Connections

15FH-W2004
NOTE: Wall Control not included. A bluetooth wall control accessory can be purchased separately.
NOTE: For multi-location wiring, skip to the next step.
1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3. Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4. Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6. Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7. Fasten the wall plate to the wall mounting plate.
White White
Red
Black
Green (Ground)
Black (to fan)
Copper
Ground
White
(Neutral)
Black (from breaker)
Wall control
Wall outlet box
8
Installing the Wall Control 10

FH-W200416
Wall Controller 1 Wall Controller 2 Wall Controller 3
if Applicable
Green
Green to Fan
Black to Fan
White to Fan
Green White Black Red
Black Black White Red Red White
Green Green
HOT IN
9
1. Install the wall control using the wiring diagram above.
2. Individually pair each of the wall controls with the fan receiver using the pairing instruction.
10 Installing the Wall Control

17FH-W200417
11
10
1. Secure wire connectors with supplied wire ties.
2. Install motor housing to mounting plate with the screw
removed as in Step 2.
Finishing the Installation
1. Install the trim ring as shown.
Installing the Trim Ring 11

FH-W200418
12
1. Remove 1 of 3 screws and loosen the others (do not remove).
2. Using the screw from the previous step, install the adapter plate.
12 Installing the Adapter Plate

19FH-W2004
13
Installing the Luminaire Module 13
NOTE: If you are not installing the luminaire module skip to
step 13.
1. Attach LED wires from motor assembly to luminaire module.

1514
20
2. Secure the luminaire module with the 3 screws to the
adapter plate.
3. Install glass shade or luminaire cover without over-tightening.
13 Installing the Luminaire Module