Modern Forms Slim Flush FH-W2003-52L-27-BA User manual

Slim Flush
Installation Instructions
works with the
Google Assistant
Compatible with

Please read and review instructions
before installation

For all questions about your ceiling fan please read
all included instructions, installation procedures,
troubleshooting guidelines and warranty information
before starting installation
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our trained technical sta at:
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at modernforms.com
Email: [email protected]
1-866-810-6615 option 01-866-810-6615 option 1
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
02 General Inquiries 02 Fan Support
DO NOT RETURN TO STORE

1. To reduce the risk of electric shock, ensure electricity has been
turned o at the circuit breaker before beginning.
2. All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70” and local electrical codes. Electrical
installation should be performed by a licensed electrician.
3. To reduce the risk of re, electric shock, personal injury or
damage to the fan or other items, the outlet box and support
structure must be securely mounted and capable of reliably
supporting a minimum of 35 Ibs (15.9 kg). Use only UL/cUL
listed outlet boxes marked “FOR FAN SUPPORT.” Use only
the screws and washers provided with the outlet box.
4. The fan must be mounted with a minimum of 7 ft. (2.1m)
clearance from the trailing edge of the fan blades to the oor
and a minimum of 1.5 ft (0.5m) from the edge of the fan blades
to the surrounding walls.
5. Never place objects in the path of the fan blades.
6. To avoid personal injury or damage to the fan and
other items, please be cautious when working around
or cleaning the fan.
7. To avoid electrical shock or damage to the motor or nish, do
not use water or chemicals when cleaning the fan or fan blades.
A dry cloth or lightly dampened cloth will be suitable for most
cleaning.
8. After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box, and the
ungrounded conductor on the other side of the outlet box.
9. All set screws must be checked and re-tightened where
necessary before installation.
02 Safety Rules
For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/

WARNING: Do not install or use your fan if any part(s) is/are
damaged or missing. This product is designed for use only with
the supplied parts and/or accessories designated for use with this
product by Modern Forms. Substitution of parts or accessories not
designated for use with this product by Modern Forms could result
in personal injury or property damage and will void the warranty.
Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
WARNING: To reduce the risk of electric shock, this fan must
be installed and operated with the supplied wall control, or
controlled from the Modern Forms app or Wi-Fi Touch Panel
Wall Control (not included).
WARNING: Do not use power tools to assemble or install your fan.
Using power tools can result in improper assembly which can lead to
noise or fan damage,personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or
cleaning the fan.
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place.
Noise and fan damage can occur
WARNING: This appliance is not intended for use by young
children without supervision.
CAUTION: Before assembling your fan, refer to the “Making
the Electrical Connections“ section. If you feel you do not have
enough wiring knowledge or experience, have your fan installed
by a licensed electrican.
NOTE: Before servicing or cleaning the fan, switch power o at
the circuit breaker.
02 Safety Rules

All Modern Forms Smart Fans are:
DC
MOTOR
WET
02 Get Smart
works with the
Google Assistant
WALL CONTROL
F-WCBT-WT
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF
FREE APP DOWNLOAD
Sync with our exclusive
Modern Forms app to
control fan speed, use
smart features like
Adaptive Learning,
create groups and
reduce energy costs
Quiet, reliable, and up to 70%
more ecient than AC fans
Durably nished and rated
for interior and exterior use
Wi-Fi and Bluetooth enabled
for exible control
Wet location-listed to the strictest
UL/cUL safety regulations
Coordinate with smart devices
for voice-activated control
WI-FI TOUCH PANEL
WALL CONTROL
F-TS-BK Black
F-TS-WT White
Sold separately
Full app control
REMOTE CONTROL
F-RCBT-WT White
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF
Compatible with our free
Modern Forms app
The Modern Forms app integrates seamlessly with smart home devices you already own.

Package Contents
Mounting Options
Installing the Mounting Bracket
Attaching the Fan Blades
Hanging the Fan
Making the Electrical Connections
Installing the Wall Control
Finishing the Installation
Installing the Trim Ring
Installing the Adapter Plate
Installing the Luminaire Module
Controlling the Fan
Factory Reset
App Instructions
Accessories
9.
10.
10.
11.
12.
13.
14.
16.
16
17.
17.
19.
20.
21.
23.
4
7
8
9
10
10
11
12
13
14
15
16
5
5
6
Table of Contents

FH-W20038
Electrical tape
Phillips screwdriver Step ladder Wire cutters
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
MAC ID
03 Tools & Materials Required

9FH-W2003
NOTE: ** denotes nish code of fan
*** denotes blade sweep of fan
3
1
8
9
6
2
7
11
4
5
10 Receiver
F-R3-2003-052
Fan Blade
RPL-F2003-***-BD-**
Decorative Trim Ring
RPL-F2003-TRIM-**
Luminaire Module
F3IN-120V-R1-30
PC Shade
RPL-F2003-GLA
Luminaire Cover
RPL-F2003-COVER-**
Safety Cable
6.5” x 19 x 2mm
Flat washer (1pcs)
Safety Cable
10 x 76mm
Pan head Phillips
wood screws (1pc)
Safety Cable
3/16” (5.2 x 8.4 x1mm)
Spring washer (1pc)
Flywheel Screws
1/4” x 11mm
Phillips/Slotted pan head
screws (6pcs)
Hardware Bag
RPL-FH2003-PARTS
Blade Screws
3/16” x 12mm
Phillips washer head
screws (10pcs)
Canopy Screws
3/16” x 15mm
Slotted pan head
screws (4pcs)
Luminaire Module
5/32” x 25mm
Phillips truss head
screws (3pcs)
Motor Housing
Adapter Plate
Remote Control
F-RCBT-WT
Mounting Bracket
RPL-F2003-HGR
Package Contents 04

FH-W200310
1 2
05 Mounting Options Installing The Mounting Bracket
1. Remove 1 set screw from mounting bracket and set
aside for use in Finishing the Installation.
2. Pass supply wires through mounting bracket and
secure to outlet box.
Standard Ceiling Caution: To prevent electrical shock,
ensure electricity has been turned o
at the circuit breaker before beginning.
CAUTION: To prevent electrical shock, ensure electricity has been
turned o at the circuit breaker before beginning.
Mount to the outlet box as shown above.

11FH-W2003
3
Attaching the Fan Blades 06
1. Place blade on motor and secure with the blade attachment,
screws and washers.
2. Insert blades in slots, aligning with motor assembly holes.
3. Secure blades with blade attachment screws & washers.
4. Remove set screws from motor housing, install blade collector
ring (when applicable), and re-install screws.

FH-W200312
07 Hanging the Fan
41. Remove 2 opposing screws and loosen the others.
2. Pass supply wires through mounting plate.
3. Lift motor assemby and hang it on the hook on the
mounting plate using one of the screw holes.

13FH-W2003
WHITE (NEUTRAL)
OUTLET BOX
BLACK (HOT)
BLACK (“AC IN L”)
RED (TO MOTOR)
GRAY (TO MOTOR)
YELLOW (TO MOTOR)
YELLOW (MOTOR)
GRAY (MOTOR)
RED (MOTOR)
RECEIVER
GREEN (GROUND)
TO HANGER BALL
GREEN (GROUND)
TO HANGER BRACKET
GREEN (GROUND)
WHITE (FOR LIGHT)
WHITE (FOR LIGHT)
BLUE (FOR LIGHT)
BLACK (FOR LIGHT)
WHITE (“AC IN N”)
GREEN (GROUND)
5
Making the Electrical Connections 08
1. Connect the wires from fan to the corresponding wires on
the receiver.
2. Connect the wires from the outlet box to the corresponding
wires on the receiver.
NOTE: Follow wiring diagram found on the receiver hardware.

FH-W200314
09 Installing the Wall Control
NOTE: Wall Control not included. A bluetooth wall control accessory can be purchased separately.
NOTE: For multi-location wiring, skip to the next step.
1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3. Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4. Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6. Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7. Fasten the wall plate to the wall mounting plate.
White White
Red
Black
Green (Ground)
Black (to fan)
Copper
Ground
White
(Neutral)
Black (from breaker)
Wall control
Wall outlet box
6

15FH-W2003
Wall Controller 1 Wall Controller 2 Wall Controller 3
if Applicable
Green
Green to Fan
Black to Fan
White to Fan
Green White Black Red
Black Black White Red Red White
Green Green
HOT IN
7
1. Install the wall control using the wiring diagram in below.
2. Individually pair each of the wall controls with the fan receiver using the pairing instructions in section 14.
Installing the Wall Control 09

FH-W200316
89
1. Install the trim ring as shown.
10 Finishing the Installation
1. Secure wire connectors with supplied wire ties.
2. Install motor housing to mounting plate with the screw
removed as in Step 2.
Installing the Trim Ring

17FH-W2003
QQ
11
10
1. Remove 1 of 3 screws and loosen the others (do not remove).
2. Using the screw from the previous step, install the adapter plate.
1. Attach LED wires from motor assembly to luminaire module.
2. Secure the luminaire module with the 3 screws to the
adapter plate.
Installing the Luminaire Module 11 Installing the Adapter Plate

≈r �¿ »y
T
12
3. Install glass shade or luminaire cover without over-tightening.
12 Installing the Luminaire Module
18

19FH-W2003
13 14 15
A
B
C
Your fan is pre-paired. If you need to pair your fan refer to step 14.
A: Light On/O, Bright/Dim +/- B: Fan On/O, Fan Speed +/-
C: Reverse Button (Summer and Winter Modes)
Air-Gap Switch: Pull tab to power o in case of emergency.
Not necessary for normal fan operation (only included with
wall control).
Air-Gap
Switch*
Pairing
Press and hold buttons
for 10-15 seconds.
Wall Control
* Air-Gap Switch only included
with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
NOTE: Your fan features 6 speeds. An audible tone will
indicate when the speed is increased or decreased. When
the fan has reached the minimum/maximum speed level
the fan will beep twice.
NOTE: Pairing must be completed within 3 minutes of power
being applied to the fan receiver.
Controlling the Fan 13

FH-W200320
16 17 18
NOTE: Changes to your Wi-Fi network settings (SSID or Security
Passphrase) will prevent your fan from connecting to the cloud.
You can re-establish connectivity by performing a Wi-Fi Reset and
using the Modern Forms app to recongure the fan to connect to
the network with the new settings.
Factory Reset
Press and hold buttons for 10 seconds
Receiver Factory Reset
Press the reset button on the receiver
until the receiver beeps
Fan Wi-Fi Reset
Press and hold the and until the LED
remains red and the receiver beeps
NOTE: Factory reset will remove remote control(s), wall
control(s) and Modern Forms app connections.
NOTE: You may need to factory reset your receiver if you
experience issues with network connectivity.
Once your factory reset you receiver go back into the app and
follow the steps.
The factory reset from the wall control only works if the wall
control was successfully paired to the fan.
14 Factory Reset