Moducase MAX Series User manual

MAX Series
MAX140/140plus

MAX140 Quick overview of aluminum frame
Front Frame
Joints uses M5x20mm (3/4”) bolts x 29 and washers x 29

MAX140PLUS Quick overview of aluminum frame
*Note Bottom middle bar is longer than top middle bar
Front Frame top bar is
doubled piece
Joints uses M5x20mm (3/4”) bolts x 29 and washers x 29

*Note
If you have adjoining displays, please DO NOT insert Rubber slots on the back of the front frame and
Side frame bar before assembly of displays.

Display Frame Contents
•Side frame top/bottom bar with screws (Side frame bar) x 4 units
•Back frame top/bottom bar with screws at ends (Back frame top/bottom bar) x 2 units
•Side frame back bar (side frame back bar) x 2 units
•Top/bottom middle bar with 1 side screw (Top/bottom middle bar) x 3 units

•Back frame middle bar (back frame middle bar) x 1unit

Slot in
Top/bottom middle bar
*End with screw slot in
*Orientation of bar
Through hole
facing sideways

Slot in
Top/bottom middle bar
*End with screw slot in
*Orientation of bar
Through hole
facing sideways

Back panel
*Orientation of backpanel
Wire holes downwards

Back panel
*Rubber slot facing up

Backpanel
holes at top

*Rubber slot facing up

Top panel
Top panel

Side panel
Side panel
*Insert C-channel if you intend to have
the side panel in.
*Insert C-channel if you intend to have
the side panel in.

*Align screws on front
frame to bars
*Insert C-channel facing the side
panel, if you intend to have the side
panel in.
*Insert C-channel facing the
side panel, if you intend to
have the side panel in.