Modus Furniture International C-KING User manual

STEP 1 :
C
FIX LEFT SIDERAIL ( ) TO THE
HEADBOARD ( ) USING PHILLIPS HEAD
BOLTS ( ) AND WASHERS ( ).
DO NOT TIGHTEN BOLTS COMPLETELY
UNTIL ASSEMBLY IS COMPLETED
C
A
15
A
A
C
15
STEP 2 :
FIX THE OTHER END OF LEFT
SIDERAIL ( ) TO THE
FOOTBOARD ( ).
C
B
STEP 3 :
FIX RIGHT SIDERAIL ( )
TO THE HEADBOARD ( )
AND FOOTBOARD ( ).
D
A
B
A
B
C
A
B
C
D
UPDATED : NOVEMBER 23TH, 2010
STEP 4 :
REMOVE PLASTIC COVER FROM STORAGE
FEETS ( ) BOLT.HFOLLOW THE ILLUSTRATION
TO FIX STORAGE FEETS ( ) TO STORAGE ( ).HG
A.
A
C
D
H
G
G
E
F
C. G.
B.
B
D. H.
E.
F.
HEADBOARD LEFT SIDERAIL
RIGHT SIDERAIL
STORAGES
FOOTBOARD
CENTER SLAT
STORAGE FEETS
LEG SUPPORTS
1PC 1PC
1PC
2 PCS
1PC
1PC
12 PCS
4 PCS
TOOL REQUIRED :
PHILLIPS HEAD SCREW
DRIVER (NOT PROVIDED)
PARTS AND FITTING PACKAGING DETAIL
BOX #1
BOX #2
BOX #4BOX #3
I.
I
BED SLATS
14 PCS
BOX #5
BRIGHTON SLEIGH PANEL STORAGE
C-KING
ASSEMBLY INSTRUCTIONS
HARDWARE BOX*
BRIGHTON SLEIGH PANEL
STORAGE BED ASSEMBLED
HARDWARE* PACKED IN BOX #3
1
4 5
2 3
PHILLIPS HEAD
BOLTS 20MM
40MM
ALLEN BOLTS
8MM
WASHERS
WOOD SCREWS
8X30MMØ
ALLEN KEY
8
18 8
81
PCS
PCS PCS
PCS PC
YOUR BOX
MAY CONTAIN
EXTRA HARDWARE
G
G
HH
HH
H
H
H

G
G
4
4
4
3
C
C
D
A
B
G
G
4
4
4
4
C
D
A
B
STEP 9 :
FOLLOW THE ILLUSTRATION TO FIX STORAGE ( )
TO LEFT SIDERAIL ( ) USING ALLEN BOLTS ( ).
USE ALLEN KEY ( ) TO TIGHTEN THE BOLTS.
G
C4
3
STEP 5 :
FIX STORAGE ( ) TO RIGHT SIDERAIL ( ) USING
ALLEN BOLTS ( ).
GD
4
TURN LEVELER UNDERNEATH STORAGE FEET ( ) TO
ADJUST THE STORAGE ( ) LEVEL AS SHOWN
ON ILLUSTRATION.
H
G
STEP 6 :
H
STEP 8 :
STEP 7 :
UPDATED : NOVEMBER 23TH, 2010
4
I
E
3
I
I
C
2
INSTRUCTIONS FOR ADJUSTING
LEVELERS:
POSITION THE BED IN YOUR ROOM
LOCATE LEVELERS UNDER EACH
CENTER LEG (E).
TURN COUNTER-CLOCKWISE TO
EXTEND, CLOCKWISE TO CONTRACT.
ADJUST LEVELERS UNTIL EACH LEG
IS APPLYING EQUAL UPWARD
PRESSURE ON THE CENTER SLAT.
REMOVE BOX SPRING AND MATTRESS BEFORE
MOVING YOUR BED.
LIFT YOUR BED WHEN MOVING IT.
DRAGGING CAN DAMAGE CENTER SUPPORT.
READJUST LEVELERS AFTER MOVING YOUR BED.
I
I
I
MAINTENANCE INSTRUCTIONS:
ARRANGE CENTER SLAT ( ) SO THAT T-NUTS ARE
FACING THE FLOOR. SLIDE ALLEN BOLTS ( ) FROM
TOP OF CENTER SLAT ( ) INTO THE 2ND, 5TH, 6TH,
AND 9TH PREDRILLED HOLES. FIX CENTER LEGS ( )
TO CENTER SLAT ( ) USING ALLEN BOLTS ( )
AND ALLEN KEY ( ).
E
4
E
F
E4
3
A
B
D
C
I
FOLLOW THE ILLUSTRATION TO PLACE THE BED SLATS ( )
ON THE BED FRAME.
I
I
2
C,D
SPREAD BED SLATS ( ) ON BED FRAME.
FIX 1ST, 7TH, 8TH, AND 14TH BED SLATS TO BED FRAME
USING WOOD SCREWS ( ). USE PILOT HOLES ON
SIDERAILS ( ) AS REFERENCE FOR CORRECT PLACEMENT.
FOLLOW THE ILLUSTRATION TO SPREAD OUT ALL THE BED
SLATS ( ).ISLIDE CENTER SLAT ( ) UNDER BED SLATS ( ).
SLIDE ALLEN BOLTS ( ) FROM TOP OF BED SLATS ( )
THROUGH PRE-DRILLED HOLES ON 1ST, 2ND, 5TH, 10TH,
13TH AND 14TH BED SLATS. TIGHTEN ALLEN BOLTS ( )
WITH ALLEN KEY ( ) TO SECURE BED SLATS ( )
TO CENTER SLAT ( ).
EI
4I
4
3I
E
F
E
4
3
F
E
E
4
3
T-NUT