Modus Furniture International DYLAN User manual

DYLAN MIRROR
ASSEMBLYINSTRUCTIONS
HARDWARE IS PACKED IN BOX #2
108
PCS
ALLENBOLT
M6.3x40MM 208
PCS
FLATWASHER
M6.3x19xt1.7MM
HARDWARE PACKED IN BOX #2(OPTION 2)
102
PCS
SCREWS
M4x40MM
BOX #1
B.DRESSER:1PC
C
B
BOX #2
A. MIRROR: 1PC
C. MIRROR SUPPORT: 2PCS
D. HARDWARE INPLASTICPOUCH
OPTION 1:
MIRROR ATTACHED TO DRESSER OPTION 2: MIRROR ATTACHED TO WALL
PARTS ANDHARDWAREPACKINGCONFIGURATIONS
301
PC
ALLENKEY
(4MM)
A

OPTION1:ATTACHINGMIRRORTODRESSER
STEP 1 STEP 2
Attachthemirrorsupport(C)to thebacksideofthedresser using twoallenbolts
(1)andflatwashers(2)permirrorsupport. Tighten using theprovided allen key
(3)butdonottightencompletely.
Attachthemirrorsupport(A)to themirrorsupportusing twoallenbolts (1)
and flatwashers (2)per mirrorsupport.Tightenusing theprovided allen key (3).
Tightenall8 allenbolts completely using theallenkey(3).
OPTION 2:ATTACHING MIRROR TO WAll
Pre-Installedmirrorbracketsare theteardropshaped hardwareon theback ofthemirror. Testtheconnectionofthebracketand themounting hardware (screw(1))
beforeinstallingforasecure, safe fit.
Installmountinghardware(screw(1))onthewall. Makesurethedistancebetweenthemounting hardware(screw(1))matches thedistancebetweenthebrackets
center ofthemirror.
CAUTION!:Werecommendinstallingthemountinghardware(screw(1))inwallstuds oraboardthatissecured to thestuds. Consult aprofessionalinstaller
before mounting todrywall.
Hangthemirrorfromthemounting hardware (screw(1)).Ensurethattheteardrop brackets havecaughtthemountinghardware (screw(1)) securely.
1
3
21
3
2
B
C
A
B
1
FRONTVIEWOFMIRROR BACKVIEWOFMIRROR
DYLAN MIRROR
ASSEMBLYINSTRUCTIONS