modway Caima MOD-6191 User manual

A
B
PLASTIC WALL PLUG
M4 x 30MM WOOD SCREW
Hardware for Headboard
Component :
1- MIRROR
Customer Service 908-368-1025 www.modway.com Page 1/3
x2
x2
Thank you for purchasing the MODWAY MIRROR !
Before you start,here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed, we recommed that it is assembled by two adults,on a carpeted or
padded area, in the room that it is intended for.Approx assembly time:30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled.Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten.Depending on use, it may be necessary to tighten
the components from time to time,so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
MOD-6191
1

Place
Place
Hardware & Tool required
STEP 1 :
DRILL THE HOLE ON WALL BY FOLLOW ANGLE BAR SCREW HOLE POSITION.
STEP 2 :
A x 2
Hardware & Tool required
Page 2/3
Customer Service 908-368-1025
INSERT PLASTIC WALL PLUG(A) INTO THE HOLE BY HAMMER.
www.modway.com
A
MOD-6191

Place
Place
Hardware & Tool required
STEP 3 :
STEP 4 :
Page 3/3
Customer Service 908-368-1025 www.modway.com
x2
B
B x 2
Assembly is complete,the MIRROR is ready to be enjoyed now!
INSERT M4 x 30MM WOOD SCREW(B) INTO THE WALL .
MOD-6191