modway EEI-3028 User manual

EEI-3028 CHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 3
Thank you for purchasing the MODWAY CHAIR.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 20 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
A. Bolt 1/4”x30mm x 4
B. Flat Washer x 4
C. Allen Wrench x1
Component:
1 Chair Body x1 2 Base with legs x 1 3 Seat Cushion x 1
2
1
3

EEI-3028 CHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 3
STEP 1:
Please put Chair Body (1) on a carpeted or padded surface.
Attach Base with legs (2) to the bottom of Chair Body (1) by using 4 pieces of Bolts (A) with 4 pieces of Flat
Washers (B) as shown. Tighten Bolts (A) by using Allen Wrench (C) as shown.
Hardware & Tools required
STEP 2:
Carefully turn over the assembled Chair Body (1) and Base with legs (2) from step 1 as shown.
A
C
B
1
2
2
A
x 4
x 4
B
x 1
C
1
2

EEI-3028 CHAIR
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 3 of 3
STEP 3:
Put Seat Cushion (3) to the seat of Chair Body (1).
Assembly is complete. Your chair is ready to be used now!
Assembly is complete. Your chair is ready to be used now!
1
2
3
3