modway MOD-6671 User manual

A
B
C
JCBC SCREW M6 x 60MM
SPRING WASHER 1/4''
FLAT WASHER 1/4"
MOD-6671
Hardware for Night Stand
Component :
1- NIGHT STAND
2- NIGHT STAND LEGS
Page 1/2
x8
x8
x8
Customer Service 908-368-1025 www.modway.com
D
E
M4 ALLEN KEY (BALL SHAPE) LONG x1
FELT PROTECTOR x4
1
2
Thank you for purchasing the MODWAY NIGHTSTAND!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the nightstand, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.

Place
Place
A x 8 B x 8 C x 8
Hardware & Tool required
STEP 1:
1. Place Night Stand (1) on a carpeted surface. Attach Night Stand Legs (2) to Night Stand (1) by inserting
JCBC Screw M6x60mm (A),Spring Washer 1
4'' (B) and Flat Washer 1 4'' (C). Tighten screw using M4
Allen Key (D). At last, put the Felt Protector (E) on the soles of Night Stand Legs (2) as shown in the
picture.
STEP 2:
Page 2/2
D x 1
Customer Service 908-368-1025 www.modway.com
1
D
2
B
C
A
E
E x 4
Hardware & Tool required
Assembly is complete. The Night Stand is ready to be enjoyed now!
MOD-6671