modway EEI-2532 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 9
EEI-2532 TV Stand
Thank you for purchasing the MODWAY TV Stand !
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
A
Ø 6 x 35 mm
x 16
F
86 x 52 x 11 mm
x 4
B
Ø 15 mm
x 16 Cx 40 D
Ø 8 x 30 mm
x 6 Ex 4
Kx 8
Gx 8 H
M 3.5 x 13 mm
x 8 Ix 4 Jx 8
L
M 12 x 35 mm
x 4 Mx 1
9 x 14 x 10 mm
M 3.5 x 15.5 mm
Screwdriver (Not Include)
Hardware :
M 12 x 45 mm
M 6.5 x 10.5 mm
Ø 8 mm
Ø 5 x 15 mm

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 9
5Centre Board Right x1
1Top Board x1 2Bottom Board x1
6Adjustable Shelf x1
3Side Board x2
7Assembly Leg x2
4Center Board Left x1
8Support Board 1 x2
9Support Board 2 x2 10 Support Board 3 x1 11 Wooden Door x2 12 Back board x1
Components:
1
2
3
3
4
5
6
7
7
8
8
9
9
10
11
11
12
EEI-2532 TV Stand

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 9
Ax8Cx8 Fx4 Gx8
STEP 1:
STEP 2:
Ax8Cx8
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1
Hardware required.
Screwdriver not included
Mx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 9
STEP 3:
STEP 4:
Bx8
Bx4Ex4
E
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1
Hardware required. Screwdriver not included
Mx1
Attention: Insert part 12 (Back Board ) first and then part 2 (Bottom Board)

Customer Service 908-368-1025︱www.modwayfurniture.com Page 5 of 9
STEP 5:
STEP 6:
Ax4Cx20
Bx2
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1
Hardware required. Screwdriver not included
Mx1
8
9

Customer Service 908-368-1025︱www.modwayfurniture.com Page 6 of 9
STEP 7:
STEP 8:
Bx2
Cx4
Hardware required
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 7 of 9
STEP 9:
STEP 10:
Dx8
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1
Ix4Hardware required

Customer Service 908-368-1025︱www.modwayfurniture.com Page 8 of 9
STEP 11:
STEP 12:
EEI-2532 TV Stand
Fx4Hx8 Hardware required. Screwdriver not included
Mx1
Lx4Hardware required. Screwdriver not included
Mx1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 9 of 9
STEP 13:
STEP 14:
Jx8 Kx8
EEI-2532 TV Stand
Hardware required. Screwdriver not included
Mx1
Assembly is completed. The TV Stand is ready to enjoy now !