MOEBE FABA2 User manual

Strandlodsvej 42a, 1 | DK-2300 Copenhagen S | moebe.dk
Assembly Instructions / Frame
To open the Frame, pull one of the corners
apart and remove the rubberband.
Place the artwork between the two glasses
and add three lists to the glass.
Pull the rubber band around the lists. Insert the last list to complete the frame.
Done!
x2 x2x1 x1
Frame

Strandlodsvej 42a, 1 | DK-2300 Copenhagen S | moebe.dk
Assembly Instructions / Frame
Frame
The Frame consists of two pieces of acrylic glass, four lists made of
either untreated wood or aluminium, and a rubber band. The rubber band
not only holds the frame together but also serves to hang the frame on
your wall.
Our frames fit a wide range of motifs; from pressed flowers to thin
pieces of paper. Nonetheless, it can happen that the acrylic glass is
affected by variations in temperature and humidity, causing your motif
to slide or move in the frame.
If this happens you can either try to flip the two sheets of acrylic glass
so outside becomes inside or you can fix your motif either using an acid-
free glue or a piece of tape. You can also make your motif thicker by eg.
placing an additional piece of paper behind it.
Congratulations
on your new