MOEBE Frame User manual
Assembly Instructions / Frame
Strandlodsvej 42a, 1 DK-2300 Cph S
(+45) 7174 7496, moebe.dk
Frame
The Frame consists of two pieces of acrylic glass, four lists made of either
untreated wood or aluminium, and a rubber band. The rubber band not
only holds the frame together but also serves to hang the frame on your
wall.
Our frames t a wide range of motifs; from pressed owers to thin pieces
of paper. Nonetheless, it can happen that the acrylic glass is aected by
variations in temperature and humidity, causing your motif
to slide or move in the frame.
If this happens you can either try to ip the two sheets of acrylic glass
so outside becomes inside or you can x your motif either using an acid-
free glue or a piece of tape. You can also make your motif thicker by eg.
placing an additional piece of paper behind it.
Assembly Instructions / Frame
Strandlodsvej 42a, 1 DK-2300 Cph S
(+45) 7174 7496, moebe.dk
To open the Frame, pull one of the cor-
ners apart and remove the rubberband.
Place the artwork between the two
glasses and add three lists to the glass.
Pull the rubber band around the lists. Insert the last list to complete the frame.
x2 x2x1 x1
Frame
Table of contents
Other MOEBE Indoor Furnishing manuals
