Moen 82403 User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
DESCRIPTION
•Chrome plated metal construction
•1/2" connections: IPS - exterior, CC - interior
•Includes showerhead, arm and flange
OPERATION
•Dual control
•Lever handles
•Volume and temperature controlled by rotating handles
toward spout to open
FLOW
•Showerhead is limited to 2.5 gpm (9.5 L/min) max.
CARTRIDGE
•1224 cartridge design
•Nonmetallic and stainless steel materials
STANDARDS
•Third party certified to CSA B125, ASME A112.18.1M,
and all applicable requirements referenced therein
WARRANTY
•Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
•5 year warranty if used in commercial installations
MOEN®
Three-Handle Tub/Shower Valve
Model: 82403
FINISHED
WALL LINE
FLOOR
NOTE:
VALVE CAN
BE ADJUSTED
FOR DOWN
FEED INST.
HOT
INLET COLD
INLET
32"(813mm) FOR
TUB/SHOWER
COMBINATIONS
AND TUB
MODELS ONLY
MIN. 2"(51mm)
MAX. 3-1/16" (78mm)
6'-6"
(1981mm)
NOMINAL
SHOWER
45"(1143mm)/
48"(1219mm)
8"
(203mm)
LEVER
HANDLE
OPENING
DIRECTION
OPENING
DIRECTION
SSppeecciiffiiccaattiioonnss
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/10