Moen Icon T6530 Series User manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
•Metal construction with various finishes identified by suffix
•1/2" copper connections
•Designed to be installed through 2, 1-1/4" and 1, 1" min. dia.
holes, 8" on center
•Adaptable for non-8" centers
OPERATION
•Maximum handle rotation angle is 90˚ to full on for either handle
•Rotate hot side counterclockwise to open and clockwise to close
•Rotate cold side clockwise to open and counterclockwise to close
Flow
•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•1224 cartridge design nonmetallic/nonferrous and stainless steel
material
STANDARDS
When trim kit is added to M-Pact valve, the product is:
•Third party certified to WaterSense,® ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with the
Federal Safe Water Drinking Act
•ADA for lever handle
WARRANTY
•Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
•5 year warranty if used in commercial installations
Icon™
Two-Handle Wall Mount Faucet
Models: T6530 series
3"
(8mm)
4-3/16"
(11mm)
7-1/2"
25˚
(19mm)
Escutcheon Dia.
2-1/4" (8mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-7/8"
(48mm)
Rev. 7/08
M•Pact™ System