3-RecallPresetsandBypasswholeloop
4-MutetheSwitcher
5-BankUP/DOWN
6-ProgramaPreset
NBUFIN
2-Signal Path
GuitarsignalfeedsintoGEC9input(NBUF INorBUF IN),entersseriesloop1~loop6
whenMUTEswitchisoff,thenoutputsfromLOUT1andLOUT2.IfMUTEison,
thesignaloutputsdirectlytoTUNERjack.
TheBUF OUT jackalwaysoutputsbufferedinputsignal.
LOOP1
LOOP6 LOOP5 LOOP4 LOOP3 LOOP2
LOUT1
LOUT2 TUNER
BUFOUT(A.O)
LOOP7
IN7 OUT7 LOOP8
IN8 OUT8 LOOP9
IN9 OUT9
BUFIN
Presspreset switchestorecallpresets, thecorrespondingLEDlightsonwhen
apresetisactive.Presstheactivepreset switchagainwillbypassalltheloops,
thecorrespondingLEDwillbeturnedoff.
Note: Recall/bypassoperationwillclearanactiveMUTE.
MUTEswitchmutetheseriesloopoutputs(LOUT1andLOUT2), atthesame
timetheguitarsignal goestotheTUNERjackwhichusuallyhooksatuner.
ClickMUTEswitchagainwill clearthemute.
Note:Recall/bypassopertationwillclearthemutetoo.
GEC9have20banksintotal,displayedas1,2,3,...9,0,"1.","2.",..."9.","0."
eachbankcontain5presetswhichisrelatedtoswitch"Preset1~5".
PressBANKUP/DOWNwill scroll up/downthebanknumber, orholdthe
BANKUP/DOWNswitchtoscrollup/downcontinuously.
Thebankdisplayblinksbeforeanewpresetisrecalled.
Note:Whenthebankblinks, theswitcher doesn tchangetheloopstatus
untilanewpresetisrecalled.
Arecalledpreset canbeprogrammedbypressingtheprogrambuttons,the
buttonschangetheloopon/off statusanduser cancheckthesoundingat the
sametime,thestatusof alltheloopsisstoredintothepreset automatically.
Theprogramlockswitchistopreventapresetbeingprogrammedunexpectedly,
Thelockswitchissuggestedtobeputat “lock”positionwhenprogrammingisdone.
Thepresetsareallstoredinnon-volatilememorywhichwillnotbeerased
eventhepowersupplyisremoved.
