
GETTING STARTED
OPERATING YOUR M3
Step 3: Plug the power cord
into an electrical outlet
Step 2: Insert power cord into
the bottom of the device.
(Unlike the AirMoji, the M3 has no
battery. To operate this device it
must be plugged into a power
source at all times.)
Step 1: Remove M3 from
packaging.
NOTE: MojiMinis sold separately.
Step 5: Separate cap from the bottom of
the MojiMinis and insert desired fragrance
into MojiMini and replace cap.
Step 4: Choose three
fragrance pods and
remove bottom and
top foil seals.
Step 6: Place the three MojiMinis in the docking port on top of the
device by inserting the MojiMini at a slight angle and aligning the side
notches with the corresponding slots (located toward the center of the
M3), once inserted into slot, push down so that MojiMini is ush.
Step 1: To turn the device
on hold power button for 3
seconds. The M3 is now in
continuous running mode.
Step 2: To schedule device
to operate for 60 minutes on
and 60 minutes off press
power button a second time.
A
B
C
A
Step 4: To activate or deactivate
an individual docking port, press
the A, B, or Cbutton that
corresponds to the desired
docking port. This relates to any
mode you may have the M3 set
in. For example if you are in
mode 2 (60 mins off 60 mins on)
and have port B deactivated then
only A and C will be operating. If
you want port B activated you
can just simply press the B
button.
Step 5: To turn the device off,
hold the power button for three
seconds.
A
B
C
A
1-2-3
A
B
C
A
Step 3: To connect device to
your smartphone and in
order to utilize the App and
set schedule for your device,
press button a third time
(see App Instructions in this
booklet). This will activate
bluetooth mode. Note: You
will notice when bluetooth
mode is activated the fan
will stop spinning.
A
B
C
A
M3 Instructions
©2021 MojiLife, LLC. All rights reserved. • Pleasant Grove, UT 84062 • v1 07302021
1