Molpir DD-MOL-006 User manual

Installation manual
Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc ©MOLPIR 2020. All rig ts reserved.
Disinfectant dispenser; non-contact; spray; for
the pole with diameter 34 mm
Ordering code: DD-MOL-006
T ank You for purc asing our product. Read t is Installation manual carefully before t e installation of t e product.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 2/12
Components list
Note: T e dispenser ① as already mounted t e bracket ③ on its back.
Po
PoPo
Pos
ss
s.
..
. Item description
Item descriptionItem description
Item description Ordering code
Ordering codeOrdering code
Ordering code Pc
PcPc
Pcs
ss
s
① Disinfectant dispenser; non-contact; 600 ml; spray; w ite DD-MOL-000 1
② Disinfectant dispenser key DD-MOL-302 1
③ Bracket plate of disinfectant dispenser for t e pole wit 34 mm diameter 0811377-M 1
④ Bracket for t e pole wit 34 mm diameter 0811380-M 2
⑤ Rear cover of t e dispenser for t e pole diameter 30/34/ 35mm 068754-M 1
⑥ Gasket for t e rear cover of t e dispenser for t e pole diameter 34 mm 0690030-34 2
⑦ Screw M5x20 mm wit round ead Torx 25 105BN6404M5x20 4
⑧ Screw M4x10 mm wit round ead Torx 20 104BN6404M4x10 4
⑨ Was er D4,3 mm x D12 mm x H1,6 mm 104BN733D4 4
⑪ Screw M4x10mm wit round ead Torx 20 104BN6404M4x10 6
⑫ Disinfectant tank ND-DD-MOL-000.1 1
⑬ Control unit of t e dispenser ND-DD-MOL-000.2 1

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 3/12
Tools necessary for t e installation
•screwdriver Torx 20
•screwdriver Torx 25
•scissors
Installation procedure
Mount t e brackets ④ wit t e screws ⑦. Place t e dispenser on propper place.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 4/12
Mount t e second screws onto brackets ⑦ and tig t t em evenly to assure t e same gaps between t e main bracket
plate ③ and t e brackets ④.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 5/12
Cut t e gaskets ⑥ at t e indicated place on t e gasket so t at t ey can be fitted to t e pole.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 6/12
Place t e gaskets ⑥ on t e pole (2 pcs) on t e upper and bottom side of t e dispenser so t at t e gaskets fit exactly
into t e slots in t e metal older of t e dispenser ③.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 7/12
Place t e rear cover of t e dispenser ⑤ - first t e lower side and t en t e upper side and c eck t at t e rear cover fits
exactly into t e grooves of t e gaskets.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 8/12
Use 6 screws ⑪ to firmly attac t e back cover to t e dispenser body.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 9/12
Preparation for operation
Use t e key ②and open t e front cover of t e dispenser.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 10/12
Inserting batteries
Open t e battery cover by pus ing t e latc in t e direction of t e arrow and t en remove t e battery cover.
Insert 4 pcs new AA alkaline batteries so t at t e polarity of t e inserted batteries matc es t e polarity markings on t e
dispenser control unit body.
Replace t e battery cover and secure t e cover latc .

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 11/12
Pouring disinfectant
Remove t e cap of disinfectant tank and fill t e reservoir wit a suitable disinfectant. T en close t e tank wit t e cap.
Use a funnel for filling to prevent t e disinfectant from spilling!
Do not overfill t e tank! T e volume of t e tank is 600 ml.
Recommended disinfectant may contain max. 75% alco ol.

Date: 24. 9. 2020 NM_DD-MOL-006_000_24092020_EN.doc Page 12/12
Dose volume setting
Switc t e main switc to position I or II to select t e volume of eac dose (position I is 0.5 ml; position II is 1.0 ml) and
t en close t e front cover of t e dispenser. T is sets t e dispenser to energy saving mode and it "waits" for t e ands to
approac t e detection space under t e dispenser nozzle.
Make several “sprays” by repeatedly placing your ands under t e dispenser to expel air from t e disinfectant transport
tubes in t e dispenser control unit.
After closing t e front cover and removing t e key, t e dispenser is ready for normal use.