Monarch MPCL II User manual

©1995 Monarch Marking Systems, Inc. All Rights Reserved.
TCMPCL2OF Rev AA 06/00
Optional Fonts Manual
CONTROL LANGUAGE
Published by the Technical Communications Department.
Printed in U.S.A.
II
MONARCH PRINTER
For supplies, service, or assistance call:
TOLL FREE:
1-800-543-6650 (In the U.S.A.)
1-800-263-4650 (In Canada)
INTERNET ADDRESS:
www.monarch.com

Each product and program carries a respective written warranty, the only
warranty on which the customer can rely. Monarch reserves the right to
make changes in the product and the programs and their availability at any
time and without notice. Although Monarch has made every effort to
provide complete and accurate information in this manual, Monarch shall
not be liable for any omissions or inaccuracies. Any update will be
incorporated in a later edition of this manual.
Trademarks
Monarch is a registered trademark of Monarch Marking Systems, Inc.
PLATFORM, 1460, 9446, 9490, and 9494 are trademarks of Monarch Marking Systems, Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft in the U.S. and other countries.
TrueType is a trademark of Apple Computer, Inc.
Hewlett-Packard is a registered trademark of Hewlett-Packard Company.
CG Triumvirate Bold is a trademark of AGFA Corporation.

Table of Contents
Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Terms to Know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Chapter 2. Using ROM Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Using ANSI Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
ANSI Character Set. . . . . . . . . . . . . . . . . . . . . . . . . 2-3
ROM Fonts Using ANSI Characters . . . . . . . . . . . . . . . . . . 2-4
Rom #1: Intensive Font . . . . . . . . . . . . . . . . . . . . . 2-4
Rom #2: Compliance Label Font . . . . . . . . . . . . . . 2-5
Rom #3: Headline Font #1 . . . . . . . . . . . . . . . . . . . 2-6
Rom #4: Headline Font #2 . . . . . . . . . . . . . . . . . . . 2-6
Rom #5: Large Font . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Rom #6: Script Font . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Rom #12: Scalable Font. . . . . . . . . . . . . . . . . . . . . 2-8
ROM Fonts Using Non-Standard Characters . . . . . . . . . . . 2-9
Rom #7: Latin-Hebrew Font . . . . . . . . . . . . . . . . . . 2-9
Rom #8: Latin-Arabic Font . . . . . . . . . . . . . . . . . . 2-10
Rom #9: Greek Font. . . . . . . . . . . . . . . . . . . . . . . 2-11
Rom #10: Cyrillic Font . . . . . . . . . . . . . . . . . . . . . 2-12
Rom #11: Turkish Font . . . . . . . . . . . . . . . . . . . . . 2-13
Ordering Additional ROM Fonts . . . . . . . . . . . . . . . . . . . . 2-14
i

Appendix A. Character Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Using Arabic Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Using Hebrew Characters. . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Using Greek Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Using Cyrillic Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Using Turkish Characters . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Appendix B. Sample Formats. . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Sample Standard Font Format Packet . . . . . . . . . . . . . . . . B-1
Sample Headline Font Format Packet . . . . . . . . . . . . . . . . B-2
Sample Scalable Font Format Packet. . . . . . . . . . . . . . . . . B-3
Sample Greek Font Format Packet. . . . . . . . . . . . . . . . . . . B-4
MPCLII Optional Fonts
ii

Chapter 1. Introduction
This manual applies only if you have purchased optional ROM
fonts for your printer.
The fonts described in this manual were designed to be used
with any MPCLII (Monarch® Printer Control Language version
II) printer. Be sure you understand the information in the
MPCLII Packet Reference Manual before you read this manual.
About this Manual ––––––––––––––––––––––––––––––––––––––––––
This manual provides the information you need to use any one
of the available ROM sets of predefined fonts on your tags or
labels. This manual includes print samples for each available
font family.
For information on incorporating ROM fonts into your tag or
label designs, see the MPCLII Packet Reference Manual.
Sample formats using ROM fonts are shown in Appendix B,
"Sample Formats."
If you wish to use a combination of fonts other than those
described in this manual, contact your Monarch Sales
Representative. Customized ROM font sets can be created to
meet your needs.
1-1

Terms to Know –––––––––––––––––––––––––––––––––––––––––––––
Proportional
spaced fonts
All characters have different widths and
are difficult to center justify.
ROM Fonts These are stored on a ROM chip which is
installed in your priner. They cannot be
erased.
Scalable (Vector)
fonts
These fonts reside in the printer’s RAM or
in a ROM chip. Changing the point size
and magnification prints a smooth font.
There is no jaggedness at any point size,
because the font is created from an
equation every time it is used.
MPCLII Optional Fonts
1-2

Chapter 2. Using ROM Fonts
This chapter describes
!how to use ANSI characters with ROM fonts.
!the available ROM fonts.
!ordering information for additional ROM fonts.
Optional fonts are available in one of several ROM sets.
Refer to the following tables to locate the style for your chosen
font.
Fonts 1-6 and 12 use the ANSI character set. Fonts 7-11 use
the non-standard character sets shown in Appendix A,
"Character Sets."
Point sizes are approximate. A 12-point character is 12 points
wide. There are 72 points to an inch, so there would be six
12-point characters to an inch. Use these point sizes to
determine which fonts will fit on your format.
The quality of your printed fonts is affected by print speed,
head energy, and the quality of your stock. To maximize the
quality of printing, you may wish to use a premium quality
stock. Contact your Monarch Sales Representative for
information about "premium" supplies. To improve the
appearance of your fonts, slow down the print speed. Refer to
your MPCLII Packet Reference Manaul to adjust the print
speed.
nCheck your bar codes when you change your print speed to
ensure an in-specification bar code.
2-1

Using ANSI Characters ––––––––––––––––––––––––––––––––––––––
To use one of these characters in your format, press and hold
the Alt key and type in the character codes for your chosen
character using the numeric keypad. To determine the
character code, add the column number and row number for
the character. For example, to produce the ÿ character, you
would press Alt 255 (column 15 + row 240). Keep in mind
that the character may appear differently on your screen than
it may appear when printed, because screen fonts and printer
fonts are not necessarily the same.
Refer to the chart on the following page for the available ANSI
characters.
MPCLII Optional Fonts
2-2

ANSI Character Set
ndesignates non-printing characters.
Chapter 2. Using ROM Fonts
2-3

ROM Fonts Using ANSI Characters –––––––––––––––––––––––––––
The following ROM fonts use the ANSI characters in the
formats.
Rom #1: Intensive Font
The Intensive Font family is used for text intensive tags or
labels. These fonts are very readable.
Font Style Point Size CG Times
500 10
501 12
502 14
503 16
504 18
CG Triumvirate
505 10
506 12
507 14
508 16
509 18
MPCLII Optional Fonts
2-4