Monessen Hearth Vent Free DFS32C Installation instructions

PRODUCT SPECIFICATIONS
DFS32C Vent Free
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable
building or fire codes.Contact local building or fire officials about restrictions and installation inspection requirements.All photographs and drawings on this brochure are for illustrative purposes only and are not intended
for, nor should they be used as a substitute for the instructions packaged with the unit.Appearance and specifications of the product are subject to change without notice.© 2007 Monessen Hearth Systems Co.
A Brand of Monessen Hearth Systems Co.
149 Cleveland Drive, Paris, Kentucky 40361
www.monessenhearth.com
INTERIOR DIMENSIONS
Front opening width: 29-7/8"
Front opening height: 21-7/8"
Rear wall width:23-3/8"
Firebox depth: 13-1/4"
TECHNICAL INFORMATION
Max. BTU Input: 38,000 BTU/HR
Ignition System: Standing Pilot
Gas Type: Natural or LP
Clearance to Fireplace: Zero
CSA Design Certified
FIELD INSTALLED ACCESSORIES
Louvers: Polished Brass, Pewter
CurvedTrim: Brass, Pewter, Black
MediumTrim: Brass, Pewter, Black
VariableThermostat Controlled ForcedAir Blower (160cfm) - BLOTMC
Radiant Panel Kits
Cottage Clay firebrick
Cottage Red firebrick
AmbientTechnologies™Remote Controls and Thermostats
Wood Cabinet Surrounds and Hearths
Classic and Designer Facings
HPBA
Hearth, Patio & Barbecue Association
MADE IN U.S.A.