monolith 35373 User manual

MM-3 Powered Multimedia Speakers with Bluetooth®
P/N 35373, 35374
User's Manual

2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future
reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. Do not place drinks
or other containers with moisture on or near the device. If moisture does get in
or on the device, immediately unplug it from the power source and allow it to
fully dry before reapplying power.
Do not touch the device, the power cord, or any other connected cables with
wet hands.
If operating this speaker in a humid environment, ensure that no condensation
occurs. Condensation could cause damage to the speaker cone and could cause
a short in the amplifier, which in turn could cause fire or severe electric shock.
Do not expose this device to excessively high temperatures. Do not place it in,
on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it
in direct sunlight.
Prior to operation, check the unit and power cord for physical damage. Do not
use if physical damage has occurred.
Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that
the power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.

3
FEATURES
3" polypropylene cone woofer
3/4" silk dome tweeter
50Hz ~ 22kHz frequency response
Dual class D amplifiers with 2x 15 watts to the woofers and 2x 8 watts to the
tweeters
Bluetooth® version 4.0 radio with the Qualcomm® aptX™ audio codec
Stereo RCA, 3.5mm TRS, and Bluetooth inputs
Includes a 3.5mm headphone output
Includes a pair of wooden isolation/elevation stands
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can
contact a Monoprice Customer Service representative through the Live Chat link on our
website www.monoprice.com or via email at su[email protected]. Check the
website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.
1x Pair MM-3 powered speakers 1x AC power cord
2x Wooden isolation/elevation stands 1x Speaker connection cable
1x AC power adapter 1x User's manual

4
PRODUCT OVERVIEW
Front View
1. Tweeter
2. Power Indicator
3. Woofer
4. Headphone Output
5. Wooden Isolation/Elevation Stand
6. Volume Knob

5
Rear Panel
Master Speaker
1. Bluetooth® Pairing Button
2. Power Switch
3. DC Input Jack
4. 3.5mm TRS Input Jack
5. Stereo RCA Input Jacks
6. Speaker Output Connector
Slave Speaker
7. Speaker Input Connector

6
INSTALLATION
1. Ensure that the Power Switch on the rear panel of the Master Speaker is in the
OFF position.
2. Rotate the Volume Knob on the Master Speaker fully counterclockwise.
3. Plug one end of the included Speaker Connection Cable into the Speaker Input
Connector on the rear panel of the Slave Speaker, then plug the other end into
the Speaker Output Connector on the rear panel of the Master Speaker.
4. (Optional) Using a 3.5mm stereo audio cable (not included), plug one end into
the 3.5mm TRS Input Jack on the rear panel of the Master Speaker, then plug the
other end into the headphone output on your mobile device or other audio
source device.
5. (Optional) Plug one end of a stereo RCA audio cable into the Stereo RCA Input
Jacks on the rear panel of the Master Speaker, then plug the other end into the
output jacks on your audio source device.
6. Plug the DC barrel connector on the included AC Power Adapter into the DC
Input Jack.
7. Plug one end of the included AC Power Cord into the AC Power Adapter, then
plug the other end into a nearby AC power outlet.
BLUETOOTH PAIRING
Perform the following steps to pair your mobile device with the speakers.
1. Press the Power Switch on the Master Speaker to the ON position.
2. Momentarily press and release the Bluetooth® Pairing Button on the Master
Speaker. The Power Indicator on the front of the speaker will begin flashing,
indicating that the speaker is in Bluetooth pairing mode.
3. Open the Bluetooth settings on your mobile device, then scan for nearby
Bluetooth devices.
4. Locate and select the MM-3 entry. If prompted for a passcode, enter 0000 (four
zeros). The Power Indicator on the front panel will cease flashing, indicating that
the Bluetooth connection has been successfully made.

7
Note that once paired with your mobile device, the speakers will remember the pairing.
To reconnect after the connection has been broken, open the Bluetooth settings on
your mobile device and select Connect to re-establish the connection.
OPERATION
Note that the output of the speakers is the sum of all inputs. Unless you specifically
want to listen to a mix of different sources, only one audio input should be in active use
at a time.
1. Rotate the Volume Knob on the Master Speaker fully counterclockwise.
2. Press the Power Switch on the Master Speaker to the ON position. The Power
Indicator on the front panel will illuminate.
3. Start audio playback on your audio source device.
4. Slowly rotate the Volume Knob clockwise until the volume is at a comfortable
listening level
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a message to [email protected]om.
Check the website for support times and links.

8
SPECIFICATIONS
Model
35373 (white) and 35374 (black)
Woofer Driver
3" polypropylene cone
Tweeter Driver
3/4" silk dome
Amplifier Type
Class D
Woofer Amplifier Power
2x 15 watts
Tweeter Amplifier Power
2x 8 watts
Inputs
1x 3.5mm TRS, 1x stereo RCA, 1x Bluetooth
Output
1x 3.5mm TRS headphone
Bluetooth® Version
4.0
Audio Codec
Qualcomm® aptX™
Digital Signal Processor
SigmaDSP®
Input Power
24 VDC, 2.5A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Dimensions (each)
4.3" x 7.1" x 5.7" (110 x 180 x 145 mm)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the
equipment no longer complying with FCC requirements for Class A digital devices. In
that event, your right to use the equipment may be limited by FCC regulations, and you

9
may be required to correct any interference to radio or television communications at
your own expense.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference
at his own expense.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Notice for Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

10
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States
and other countries. aptX™ is a trademark of Qualcomm Technologies International,
Ltd., registered in the United States and other countries. Qualcomm® aptX™ is a product
of Qualcomm Technologies International, Ltd.
SigmaDSP® is a registered trademark of Analog Devices, Inc.