Monport 40W User manual

1
Monport 40W
Laser
Engraver
Controller
Manual
Read Carefully Before Use
Save It Well for Future Reference

2
1. OVERVIEW
This GRBL controller is developed for Monport 40w CO2laser engraver & cutter and other 40w machines which can
engrave and cut glass, leather, plastic, wood, etc. Its firmware and ports can also be used to control similar engravers
from other manufacturers and some CNC machines. It can be taken as the replacement of Nano controller.
2. PRODUCT IMAGES

3
3. TECHNICAL SPECIFICATIONS
Model
40w laser engraver&cutter
CPU Type
MEGA328P/ Arduino
Board Dimensions
3.3″x5.9″x0.9″
(8.5cmx15cmx2.35cm)
Input Power
24V
Output Power
5V / 12V / 24V
Support Axis
X, Y1, Y2, Z
Firmware
GRBL
Max. USB Speed
Mini USB 2.0
Compatible Software
Lightburn / LaserGRBL
Support Operating Systems
Windows / MacOS / Linux
4. PRODUCT DIAGRAM

4
No.
Label
Pins
Use
1
DC
—
DC 12-48V power Supply
2
—
—
USB-C
3
Reset
2
Reset
4
Probe
2
Z axis height automatic detection
5
Run
2
Continue the process
6
Holo
2
Process the process
7
X+
3
X Axis Limit Switch
8
X-
3
X Axis Limit Switch
9
Y+
3
Y Axis Limit Switch
10
Y-
3
Y Axis Limit Switch
11
Z+
3
Z Axis Limit Switch
12
Z-
3
Z Axis Limit Switch
13
Offline plug
8
Offline control
14
DC 24V
2
DC output/input 24v
15
PWM/5V
3
5V Output Signals
16
PWM/12V
3
12V Output Signals
17
PWM
2
5V Output Signals
18
12V
2
5V Temp. Controller Signal
19
12V
2
5V Temp. Controller Signal
20
Z/motor
4
Z Axis Driver Signal
21
Y2/motor
4
Y2 Axis Driver Signal
22
Y1/motor
4
Y1 Axis Driver Signal
23
X/motor
4
X Axis Driver Signal
24
SPN
2
Trouble-locating
25
DC 48V
2
DC output 48V
26
DC 24V
2
DC output 24V

5
5. INSTALLATION
Step 1: Remove the old control board from the engraver, and place the new controller where the old one is.

6
Step 2: Connect power supply to the control board.
Step 3: Connect the machine with PC via a USB cable.

7
6. SOFTWARE CONFIGURATION
Step 1: Check out whether the USB cable is connected to the PC.
Step 2: Open the Lightburn Software.
Step 3: Choose the device.

8
Step 4: Name whatever you like.

9
Step 5: Enjoy your new journey
7. CONTACT INFO
Thank you for choosing this controller to upgrade your 40w machine! Come and join in the Monport community at our
official laser group on Facebook or visit the company forums at monportlaser.com! If you encounter any problem
regarding your engraver, do not hesitate to contact customer service with your order number at help
[e-mail]. Our teams will respond within 24 hours to make things right. Thank you and we hope you
will choose us again for all your laser needs.