Monster MH22002 User manual

MONSTER MH22002 Clarity 8.0 ANC Earbuds User Guide
Read more: https://manuals.plus/monster/mh22002-clarity-8-0-anc-earbuds-
manual#ixzz7tpXGHUYB
CLARITY 8.0 ANC
Model No: MH22002
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Contents hide
1 Product Overview
2 FCC Statement
3 Documents / Resources
4 Related Posts
Product Overview
In-ear Earphone x 2 (le & right)
Charging Case
USB-C Charging Cable
Ear Tips ×3 pairs (M size installed)

Quick Start Guide and Warranty
Letter
1. Multi-Function Button （MFB ）
2. Microphones
3. Ear Tip
4. Charging contacts

5. USB-C Charging Port
6. Pair/Reset Indicator Light
7. Charging Case Indicator Light
Power On/Off
Earphones will turn on when the charging case is opened. To turn off, place the earphones in
the charging case, charging will start when the cover is closed.
Charging Case Wired/Wireless Charging
Besides using the included USB-C charging cable to charge the charging case, the charging
case can be charged by a compatible wireless charging device.
Noise Cancellation On/Off
Press and hold the MFB of the right earphone for 2 seconds to switch between different
modes. [Noise Cancellation Off]–[Ambient On]–[Noise Cancellation On]
Pairing
Left and right earphones will turn on and connected automatically when the charging case is
opened, “pairing” voice prompt will be heard.
For a new device connection, go to Bluetooth settings on your device and search for new
devices (new Monster device), “connected” voice prompt will be heard once the earphones
are paired.
When turning on, the earphone will try to connect to the last connected device. To pair a
new device, turn off the currently connected Bluetooth device.
Connect other devices
Keep the earphones in the charging case and leave the cover open. Press and hold the Pair /
Reset to Factory Settings Button for about 5 seconds until the light indicator starts to flash.
It is now in pairing mode. Activate the Bluetooth on your device and set it to search for new
devices.
Volume Control
The earphones do not have a volume control function. After Bluetooth connection, the

volume level can be controlled on the connected device.
Call
Answer / End a call: Single tap the MFB.
Reject the call: Press and hold the MFB for about 2 seconds.
Music
Play/Pause music: Single tap the MFB.
Previous song: Double-tap the MFB of the left earphone.
Next song: Double-tap the MFB of the right earphone.
Voice Control
When the earphone is connected to the phone, press and hold the MFB of the left earphone
to activate the voice assistant.
Reset to Factory Settings
Open the cover of the charging case, keep the left & right earphones in the charging case,
press and hold the Pair/ Reset to Factory Settings Button for 10 seconds, the Pair/Reset
Red Indicator Light will flash quickly, indicating the earphones are restored to factory
settings.
LED Indicator Guide
Mode
Description
Voice Prompt
Power On
“Power On”
Power Off
_
“Power Off “
Pairing
The white LED indicator of the charging
case flashes quickly
“Pairing”

Connected
After connected, the indicator light goe
s off
“Connected”
Earphones char
ging
When the earphone is charging, the indi
cator light of the charging case flashes
and turns off when it is fully charged
–
Charging case
During charging, the indicator light of t
he charging case is on, and the light is o
ff when it is fully charged
_
Cautions
* Please place the earphones in the correct location (L/R)for normal charging.
* Replacement of battery (on your own)is not recommended.
* Do not expose the battery (battery pack)to excessive heat such as direct sunlight or fire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2)this device must accept
any interference received, including interference that may cause undesired operation. The
device has been evaluated to meet general RF exposure requirements. The device can be
used in portable exposure conditions without restriction.
FCC ID：2AVD2-MH22002

Documents / Resources
MONSTER MH22002 Clarity 8.0 ANC Earbuds [pdf] User Guide
MH22002, 2AVD2-MH22002, 2AVD2MH22002, MH22002 Clarity 8.0 ANC
Earbuds, Clarity 8.0 ANC Earbuds, ANC Earbuds, Earbuds

MONSTER MH22002 Clarity 8.0 ANC Earbuds [pdf] User Guide
MH22002L, 2AVD2-MH22002L, 2AVD2MH22002L, MH22002 Clarity
8.0 ANC Earbuds, MH22002, Clarity 8.0 ANC Earbuds

Read more: https://manuals.plus/monster/mh22002-clarity-8-0-anc-earbuds-
manual#ixzz7tpXPuVpY