Monster MH11905 User manual

MONSTER
SOLITAIRE
Model No.: MH11905
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
•Headphone
•Charging Cable
•Eartips x 3 Pairs (S, M & L)
•Quick Start Guide & Warranty letter
1. Volume Up Button, Track Forward
2. Multi Function Button (MFB) (Power On/Play/Pause…)
3. Volume Down Button, Track Back
4. Light Indicator, White –Bluetooth,
5. MIC B Charging Port
①
②
③
⑤
④

Power On/Off
In power off mode, press and hold the MFB for about 2 seconds to power on the
headphones, the white indicator on for 1 second and you will hear “Power on”.
In power on mode, press and hold the MFB for about 5 seconds to power off the
headphones, the white indicator on for 1 second and you will hear “Power off”.
Pairing
In power off mode, press and hold the MFB for about 5 seconds until indicator light flashes
white, you hear “Power on”…”Pairing”. Now headphones are in pairing mode. Activate
Bluetooth®on your equipment and set it to search for new devices (new Monster device).
When the headphones are paired successfully, “connected”will be heard.
Note: When you unbox the headphones and power it on for the first time, it will enter to
pairing mode automatically.
Volume Control
Short press the Volume Up or Down Button to turn volume up or down, you hear tone
once you reach the maximum volume or minimum volume.
Call
Answer/End Call: short press the MFB
Reject Call: long press the MFB about 2 seconds
Music
Play/Pause: In the music playback mode, press the MFB to play/pause music.
Track back: In the music playback mode, press and hold the Volume Down Button for 2
seconds for previous song.
Track forward: In the music playback mode, press and hold the Volume Up Button for 2
seconds for next song.
Sound characteristics: Press and hold the volume plus and minus 3 seconds, switch from
Normal to Turbo will have two “di di” beeps, and switch from Turbo to Normal will have “di”
beep.
Voice Control
After connecting to the phone, quickly double press the MFB to activate the voice
assistant.
LED Guide to Indicator Lights
Mode
Description
Indication
Power On
White LED indicator lights for about 1 second
“Power On”
Power Off
White LED indicator lights for about 1 second
“Power Off”
Pairing
White LED flashes quickly
“Pairing”
Connected
No function operation, the indicator light is off
“connected”

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.