Monster ClarityHD one Guide

manual and warranty
manuel et garantie
manual y garantía

Important Safety Information
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. DO NOT defeat the safety purpose of the polarized plug.
A polarized plug has two blades with one wider than the other.
The wider blade is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
1
ENGLISH

10. PROTECT the power cord from being walked on or pinched,
particularly at the plugs and the point where it exits from
the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. UNPLUG this apparatus during lightning storms or when unused
for long periods of time.
13. REFER all servicing to Monster Cable.® See “FORMAL WARRANTY
CLAIM” in the warranty section in the back of this manual.
14. DO NOT expose this apparatus to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on
the apparatus.
15. To completely disconnect this apparatus from the AC mains,
disconnect the power supply cord plug from the AC receptacle.
16. The mains plug of the power supply cord shall remain
readily operable.
2

The exclamation point, within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No naked flame sources — such as candles — should be placed
on the product.
WARNING: Batteries, battery pack or batteries installed shall not be exposed
to excessive heat such as sunshine, fire or the like.
Place the equipment near a main power supply outlet and make sure that
you can easily access the power breaker switch.
3

WARNING: This product is intended to be operated ONLY from the AC voltages
listed on the back panel. Operation from voltages other than those indicated may
cause irreversible damage to the product and void the product’s warranty. The use
of AC plug adapters is cautioned because it can allow the product to be plugged
into voltages in which the product was not designed to operate. Use only the power
cord provided with your product. If you are unsure of the correct operational voltage,
please contact your local distributor and/or retailer.
4

Left Speaker
Out
-2dB 0 +2dB
(L)
(R)
(L) (R)
Computer/MP3
Mini Jack In
TV/Audio In
Mixer In
High Definition
Multi-Media
Speaker Monitor
AC-IN
Normal
High BoostHigh Cut
Wireless
Module
Back view
Front 3/4 view
5

Features and Benefits
iPod®/iPhone®dock
Just set your iPod or iPhone in the integrated dock and start listening
Advanced 6.5-inch bass driver and concave 1-inch tweeter
Delivers big bass and superior sonic accuracy
Digital power amp
For powerful, room filling sound
Active/Passive configuration
Makes setup and installation quick and easy
Remote control
Control iPod/iPhone playback
Connectivity for home and professional use
RCA, ¼-inch TRS Unbalanced and 3.5 mm mini jack inputs
Wireless port
For future use with Monster®Streamcast™Wireless System
6

Set-up
Clarity HD™Model One Monitors feature an active/passive configuration,
with the amp, volume control and inputs on the right (active) monitor.
The left (passive) monitor is connected to the active monitor with included
Monster®8-pin DIN cable. No other cables need to be connected
to the passive monitor.
Connection to Passive Monitor
Make sure power is turned off. Plug one end of the included Monster®8-pin DIN
cable into the active monitor and the other end into the passive monitor.
7

Left
Speaker
In
-2dB 0 +2dB
Normal
High BoostHigh Cut
Wireless
Module
Left Speaker
Out
Computer/MP 3
Mini Jack In
(L) (R)
V/Audio In
Mixer In
High Definition
Multi-Media
Speaker Monitor
AC-IN
High Definition
Multi-Media
Speaker Monitor
8

Power
Plug the AC power cord into the back of the active monitor,
as shown. Plug the two-pronged plug end into a 120-volt
power outlet.
9

Left Speaker
Out
-2dB 0 +2dB
(L)
(R)
(L) (R)
Computer/MP3
Mini Jack In
TV/Audio In
Mixer In
High Definition
Multi-Media
Speaker Monitor
AC-IN
Normal
High BoostHigh Cut
Wireless
Module
10

Connecting Audio Devices
Connecting iPod®/iPhone®
Clarity HD™Model One Monitors feature a built-in dock for iPod and iPhone
for an easy, direct connection. This will also give you the ability to control
playback with the included remote control.
Using iPod/iPhone Dock Adaptors
Clarity HD Model One Monitors include multiple Dock Adaptors that fit
iPod nano®(4th and 5th generations), iPod touch®(2nd generation),
iPod classic®(80GB and 120GB/160GB), iPod with video (30GB)
and iPhone 3G and 3GS.
To install, simply push the adaptor plate that fits your model into the
iPod/iPhone dock.
iPod nano
iPod touch
iPhoneiPod and
iPod classic
iPod nano
5th generation (30GB),
iPod classic 80GB
and 120/160GB
iPhone 3G
and 3GS
2nd generation 4th generation 5th generation
915 16 17 18
iPhone
iPod and
iPod classic
iPod touch iPod nano iPod nano
Number for which iPod/
iPhone fits
11

iPod/iPhone
iPod/iPhone
dock adaptor
iPod/iPhone dock
12

NOTE: Make sure the “Shake to Shuffle” setting is turned off on your iPod®
or iPhone.®The bass response of the speaker may activate it and interfere
with playback.
NOTE: If a dock adaptor for your model of iPod or iPhone isn’t included with Clarity
HD™Model One Monitors, you can purchase one at www.apple.com/store. Apple’s
dock adaptors do not come in black, but the Clarity HD Model One Monitor’s dock
is made to be compatible with Apple Dock Adaptors.
Docking iPod/iPhone
After installing the proper dock adaptor, set your iPod or iPhone onto the dock on
the top of Clarity HD Model One Monitors, being sure the dock port on your player
and the dock plug are aligned properly. Your player should connect easily and
remain upright in the port, with no forcing necessary.
13

Connecting Devices using 1/8-inch (3.5 mm) mini jack input
You can connect and listen to any music player that has a standard 3.5 mm
headphone port using a mini jack to mini stereo cable (not included).
To connect, turn off the power to the monitors, plug one end of the cable into the 3.5
mm headphone output of your player and the other end into the 3.5 mm input on the
back of the active monitor. Turn on the power.
IMPORTANT: The iPod/iPhone dock will override and disable the 3.5 mm
mini jack input when an iPod or iPhone is docked. Be sure to remove your
iPhone or iPod from the dock before using the 3.5 mm input.
Connecting Devices using RCA inputs
The RCA inputs allow you to connect AV components that utilize RCA outputs,
like a CD player, using a stereo RCA cable (not included).
Stereo RCA cables are color coordinated red and white, with red for the
“right” channel and white for the “left” channel. But some color variation can
occur in the left channel plug. Monster Cable®RCA, the recommended cable,
is blue, and some manufacturers use black. However, red is consistently
used for the right channel.
14

To connect, plug the left and right plugs on one end of the cable into their
respective RCA outputs on the back of your component. They will be color
coordinated or marked “left” and “right.” Plug the other end of the RCA
cable into their respective inputs on the back of the active monitor.
Connecting Devices using Left and RightTRS ¼-inch
(6.35 mm) Balanced Inputs
You can connect professional stereo audio equipment, like studio
or DJ gear, using a TRS ¼-inch to ¼-inch cable (not included).
To connect, plug one end of the cables into the left, then right ¼-inch outputs
on your gear and the other ends into the left and right ¼-inch inputs on the back
of the active speaker.
Always turn the power off when connecting
or disconnecting components.
Listen
Be sure a music player is securely connected, as described
in the previous section.
Turn on Clarity HD™Model One Monitors by pushing the power button
on the left side of top surface of the active monitor or with the remote control.
Start your player.
15

Clarity HD™Model One Monitors feature
a High Filter for adjusting the level of the high
frequencies. This allows you to adapt the
speakers to your listening space.
Set to 0: Keeps the high frequencies at
the level they were originally set at in the
recording studio.
Set to -2dB: Lowers the level
of the high frequencies.
Set to +2dB: Increases the
level of the high frequencies.
Left Speaker
Out
-2dB 0 +2dB
(L)
(R)
(L) (R)
Computer/MP3
Mini Jack In
TV/Audio In
Mixer In
High Definition
Multi-Media
Speaker Monitor
AC-IN
Normal
High BoostHigh Cut
Wireless
Module
High
Frequency
Filter
Using High Frequency Filter
Volume
Volume can be controlled with the volume controls on the right side of the top
surface of the active monitor or with the remote control.
16

Using Remote Control to Control
Clarity HD™Model One Monitors
Make sure the CR2025 battery used by the remote is installed correctly.
If it is old, replace it
Power on and off: Push and release.
Volume: Push and hold to increase volume. Release when desired
volume is reached. Push and hold to decrease volume.
Release when desired volume is reached.
Mute: Push and release. To resume sound, push again.
Power
Volume up
Skip forward
Scan forward
Play/pause
Skip back
Scan back
Volume down
Mute
17

Using Remote Control to Control iPod®/iPhone®
The included remote control can be used to control playback
of a docked iPod or iPhone. It cannot control playback
of other connected devices.
Using Remote Control for iPod or iPhone Playback
Play: Push and release.
Pause: Push and release. Push again to resume play.
Skip forward to next track: Push and release.
Skip back to previous track: Push and release.
Scan forward through a track: Push and hold.
Release to stop scanning and resume normal play.
Scan backward through a track: Push and hold.
Release to stop scanning and resume normal play.
18

Troubleshooting
The table can help solve most operating problems with your
Clarity HD™Model One Monitors.
First, follow these steps:
• Remove your iPod®/iPhone®from the dock completely.
• Reseat it in the dock rmly.
• Make sure your iPod/iPhone has the latest software installed.
19