MONTEAUX 4151-NDM User manual

Questions, problems, missing parts? Before returning to the store,
call Monteaux™Lighting Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-800-446-9092
We appreciate the trust and confidence you have placed in Monteaux™Lighting through the purchase of this light. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Monteaux™Lighting!
THANK YOU
USE AND CARE GUIDE
LED VANITY
Item # 1004397143
1004397146
Model # 4151-NDM
DIS-4151-NDM

Table of Contents
Safety Information
Warranty
CAUTION:Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted during
shipping. If there is a defect in the wire, do not attempt
installation. Please call our Customer Service Team at
1-800-446-9092.
WARNING: Before starting installation of this fixture or
removal of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the
fuse box.
............................................................2Table of Contents
Package Contents.......................................................................4
...........................................................2Safety Information
...................................................................... 5 Installation
Hardware Included......................................................................3
...........................................................................2Warranty
......................................................................... 6Operation
..................................................................3 Pre-Installation
.......................................................... 6Care and Cleaning
Planning Installation...................................................................3
Tools Required............................................................................3 .............................................................. 6Troubleshooting
Table of Contents
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifica-
tions, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty
material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as
this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or
implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability
and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved
in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-446-9092.
MONTEAUX LIGHTING™
Please contact 1-800-446-9092 for further assistance.
2
 Consult a qualified electrician if you have any electrical questions.
 NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica -
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.

3
MONTEAUX LIGHTING™
Please contact 1-800-446-9092 for further assistance.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Wire
strippers
Ladder Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
Pre-Installation
PLANNING INSTALLATION
 Read all instructions before installation.
 To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
 Keep your receipt and these instructions for proof of purchase.
AA BB CC
Mounting unit (preinstalled)
AA 1
BB Mounting screw 2
CC Wire nut 3
DD Set screw (preinstalled) 4
Part Description Quantity
DD

4
Please contact 1-800-446-9092 for further assistance.
MONTEAUX LIGHTING™
Pre-Installation (continued)
PACKAGE CONTENTS
Pre-Installation (continued)
___________A
Part Description Quantity
A Light fixture 1

Please contact 1-800-446-9092 for further assistance.
MONTEAUX LIGHTING™
5
Installation
1ATTACHING THE MOUNTING UNIT TO THE
JUNCTION BOX 2MAKING THE ELECTRICAL CONNECTIONS
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (CC) and secure them with electrical tape (not
included).
NOTE: If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
CC
3SECURING THE LIGHT FIXTURE
 Remove the preinstalled set screws (DD) to separate
the mounting unit (AA).
 Attach mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
 Secure the light fixture (A) to the junction box by
placing it over the mounting unit (AA) and securing it
with the previously removed set screws (DD).
A
AA
DD
AA
A
AA
BB
DD

6
Please contact 1-800-446-9092 for further assistance.
Operation
MONTEAUX LIGHTING™
1Turning the light on
 Turn the light switch on to activate the fixture.
Operation
Care and Cleaning
 Clean the lamp with a soft, dry cloth.
 Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem Possible Cause Solution
The bulb will not light. The power is off. Ensure the power supply is On.
Check the wiring.There is a faulty wire connection.
Ensure the circuit breaker is in the On position.The circuit breaker is off.
Check the wire connections.The fuse blows or circuit
breaker trips when the
light is turned on.
There are crossed wires or the
power wire is grounding out. Contact a qualified electrician or call the Customer Service Team at
1-800-446-9092.

Questions, problems, missing parts? Before returning to the store,
call Monteaux Lighting™Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
Retain this manual for future use.
1-800-446-9092