MONTISA 4135 User manual

PARTS LIST
TOOLS NEEDED
7/ 1 6 "
Wrench
T-30
Torx Bit
5/32"
Drill Bit
Hand
Drill
hellomontisa.com
3/8"
Socket
Wrench
4135
CABINET ASSEMBLY
REV 1 4.6.2023
4 1 3 5 CAB I N E T
Part Qty Description Image
A4 1/4-20 X .50 HEX WASH HD WHIZ-LOCK SCREWS
B4 1/4-20 KEPS NUTS
C4 #14 x 1 TORX DRIVE WOOD SCREWS
D1 DOOR/DRAWER LOCK ASSEMBLY WITH KEYS

Montisa Customer Service
[phone]
customerservic[email protected]om
hellomontisa.com
3220 Jeerson Ave SE
Grand Rapids, MI 49548 USA
4135 ASSEMBLY INSTRUCTIONS
1
3
For ganging multiple cabinets, use 1/4-20
Screws (Part A) and KEPS Nuts (Part B).
There are (4) hole locations for ganging
present on each side panel. Slide center doors
outward for access to upper holes.
If installation includes a wood or laminate top,
center top surface on cabinet.
Mark the hole locations for drilling on bottom side
of top surface. (4) Hole locations per cabinet.
Drill pilot holes 3/4" deep using 5/32" drill bit.
***Do not exceed 1"
depth for risk of
breaking through
the top surface.***
Realign top surface onto cabinet and install as
shown with torx bit and #14 Wood Screws (Part C).
2
A
B
C
D
A
B
C