Mooer Micro Series User manual

RANGE /
DC IN
HP
SP
BP
LP
TALK
AUTO
TOUCH
@Wah
MODE
SPEED GAIN
Main Features
Digital Auto Wah Prdal
71.True bypass footswitch: Engages and
disengages the effect.
2.On/Off Led: Shows the on/off status of
the pedal. When the Led is lit the effect
is engaged.
3.MODE control: Selects the filter mode
and simultaneously adjusts the MIX and
ATTACK of the filter. The 5 filter modes
are listed below:
LP (Low pass)
BP (bandpass)
HP (high pass)
SP (Standard)
TALK (vocals)
4. RANGE:Adjusts the tonality of the filter
5. Operation method switch: 'AUTO' is a
time based filter. 'Touch' responds to
the dynamics of the instrument.
6. SPEED / GAIN: Adjusts the rate
of the 'AUTO' wah or the input response
of the 'TOUCH' wah.
7. DC in power jack: Input for power supply , use a 9V DC regulated
power supply.
8. Input jack : 1/4” audio jack for connecting to the input device or
instrument.
9. Output jack : 1/4” audio jack, effect output for connection to amp or
other devices.
Modes：5 digital auto filters with 2 methods of operation.
Input：1/4” mono audio jack.（Impedance: 470k Ohms）
Output：1/4” mono audio jack（Impedance: 100 Ohms）
Power requirements: AC adapter 9V DC ,center negative. Highly
recommend to use Mooer Micro Power.
Current Draw: 120mA
Dimensions：93.5mm(D) x 42mm(W) x 52mm(H)
Weight：140g
Accessories：Owner’s Manual
*Notes：Any specification’s update will not be amended in this manual.
5 different Wah filter modes
Two methods of operation : Auto (time based) and Touch (dynamic response)
Versatile controls
Full metal case
Truebypass switching
9V power supply
PLEASE READ CAREFULLY BEFORE PROCEEDING
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
*Direct sunlight *Heat sources
*Magnetic fields *Extreme temperature or humidity
*Excessively dusty or dirty location *High humidity or moisture
*Strong vibration or shock
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC, ,center
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Precautions
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
46
8
9
1
3
2
Pedal layout
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
5
Part No:620010599
@Wah

自动哇音效果器
连接
连接设备或断开连接前，请务必关闭电源及其他设备，这将有助于避免故障和损害其他设
备。另外，要确保移动本机前断开所有的连接线和电源线。
放置场所
为防止变形、变色，及其他严重损坏，请避免以下情况：
•阳光直射 •靠近热源
•磁场 •高温潮湿
•多尘或不洁的地方 •湿度较大
•强烈震动或摇晃
电器干扰
在使用本机时，收音机和电视机可能会造成干扰。使用本机时要远离收音机和电视机。
清洁
请使用干燥柔软的布清洁本机。如有必要，可用稍微湿润的布拭擦。切勿使用粗糙的清洁
粉、酒精、涂料稀释剂、蜡、溶剂、清洁剂及化学试剂等浸渍抹布。
操作
请勿暴力使用开关及控制元件。
请勿让纸屑、金属制品及其他物体落入机内。
注意不要摔落，不要使其受到冲击及过度压力。
两种模式选择：Auto模式和Touch模式
每种Wah提供五种不同的音色模式选择，囊括了从Low pass Auto wah到Talk Touch Wah
等共10种Wah音色
提供Range,Speed\Gain,Mode三个旋钮控制参数调节以及两档开关切换模式
全金属MINI外壳
纯直通脚踏开关
9V电源供电
1.TRUE BYPASS 纯直通踩钉确保音色无损传输。
2.LED提示效果器工作状态。
3.MODE旋钮 在Auto和Touch模式下可以选择5种不同
的音色模式，同时在对应的区域可调节一定的MIX和
ATTACK:
LP(低通):AUTO模式lowpass wah
TOUCH模式lowpass wah
BP(带通):AUTO模式bandpass wah
TOUCH模式bandpass wah
HP(高通):AUTO模式highpass wah
TOUCH模式high wah
SP(标准):AUTO模式standard wah
TOUCH模式standard wah
TALK(人声):AUTO模式talk wah
TOUCH模式talk wah
4.RANGE旋钮 调节Wah音的范围。
5.两档拨档Auto模式和Touch模式。
6.SPEED/GAIN旋钮调节Wah速度和根据不同。输入
调节增益大小。
7.DC9V使用9V直流变压器(内负外正 )。
8.INPUT输入：1/4”单声道音频接口，连接输入信号。
9.OUTPUT输出：1/4”单声道音频接口，连接输出信号。

1．连接电源（9V，内正外负， ）
2．连接吉他信号输入至@Wah的INPUT接口，OUTPUT接口连接至音箱输入接口
3．踩下踩钉开启效果器，通过提供的旋钮调节对应参数获得需要的效果音色
工作模式：10种Wah音色可选
输入：1/4”单声道音频接口（阻抗470k Ohms）
输出：1/4”单声道音频接口（阻抗100 Ohms）
电源供给：9V直流变压器（内负外正），推荐使用Mooer Micro Power
工作电流：120mA
尺寸：93.5mm(D) x 42mm(W) x 52mm(H)
重量：140g
附件：用户手册
*免责声明：参数更新恕不另行通知
电源供应
请使用正确的交流电源插座连接电源变压器。
请使用内负外正 的9V（±10%）电源变压器，最大工作电压不得超过12V，否则
将会导致设备损坏，着火或者其他问题。不使用时或雷雨天时请拔下电源。
RANGE /
DC IN
HP
SP
BP
LP
TALK
AUTO
TOUCH
@Wah
MODE
SPEED GAIN
5
9
3
4
Part No:620010599
7
6
8
1
2
@Wah