Mooer Tender Octaver Pro User manual

SUB UPPER
11
8 9
10
TE NDER
OC TAVER
0 -OCT S +U
EXP MOD E
0 +OCT
S.LEVEL U.L EVEL
SUB
UP
SMO OTH
DRY
PRESET ON/OFF
13
12
10
14
INP UT EXP L(MON O) R
DC 9V 30 0mA
15 16 17 18
TENDER OCTAVER
Professional polyphonic octave pedal
Power Supply
Connections
or disconnecting, this will help prevent malfunction and / or damage to
other devices.
Also make sure to disconnect all connection cables and the power cord
before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception
interference.
Operate this unit at a suitable distance from radios and televisions.
Location
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Direct sunlight
Magnetic fields
Excessive dusty or dirty location
Strong vibrations or shocks
To avoid deformation, discoloration, or other serious damage, do not
expose this unit to the following conditions:
Heat sources
Extreme temperature or humidity
High humidity or moisture
Please connect the designated AC adapter to an AC outlet of the
correct voltage.
Please be sure to use only an AC adapter which supplies 9V
DC(±10%), , center negat ive. Unplug t he AC power adap ter
when not in use or during electrical storms.
Precautions Main Features
Pedal layout
Separate volume, tone and pitch controls for both su b and upper
octaves
Smooth control for automatic volume swells
External connection for expression pedal to control octave pi tches
Store and recall up to 4 user presets
Stereo outputs

S.TO NE
0 -OCT S+ U
EXP MODE
0 +OCT
S.LEVEL U.LE VEL
SUB
UP
U.TO NE
SMOO TH
DRY
S.TO NE
0 -OCT S+ U
EXP MODE
0 +OCT
S.LE VEL U.LE VEL
SUB
UP
U.TO NE
SMOO TH
DRY
S.TO NE
0 -OCT S+ U
EXP MODE
0 +OCT
S.LEVEL U.LE VEL
SUB
UP
U.TO NE
SMOO TH
DRY
2. Stereo
1. Mono
INPU T EXP
L(MO NO)
R
DC 9V 300 mA
INPU T EXP
L(MO NO)
R
DC 9V 300 mA
S.T ONES.L EVEL U .LEV EL U.TO NE
SMO OTH
DRY
1. Deep Sub
2. Organ
3.  Chorus
4. ±Octave
Pa rt N o:6200106 14
Setup Quick start guide Suggested settings Specification
Note: For best results we recommend putting the tend er octave pro
before drive and distortion pedals in your signal chain but feel free to
experiment.
Storing Presets
The Tender Octave Pro has 4 preset slots for s aving some of your
favorite pe dal settings ready for instant use in a l ive situation.
Dial in your fa vorite settings
Press the STORE button and the pres et status LED will begin flashing
Press the PRE SET footswitch to se lect the desired saving destinati on
Press the STORE button again to con firm or adjust any parameter
knob to cance l
To restore fact ory preset settings hold down the STORE button,
PRESET an d ON/OFF footswitche s while connecting power to the pedal
To recall a Prese t simply press the PRESET footswitch until the desired
preset LED is h ighlighted.
Note: When th e left most LED is illuminated the Tend er Octave Pro will
read all of the p arameter values from the controls c urrent settings.
Input：1/4” mono audio jack.(Impedance: 1M Ohms)
Output：1/4” mono audio jack(Impedance: 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power requirements: 9V DC 300mA , center nega tive.
Dimensions: 106mm(D)X96mm(W)X53mm(H)
Weight: 4 00g
Notes：Any specification’s update will not be amended in this manual.
MOOER AUDIO CO .LTD
Shenzhen,China
S.TO NE
0 -OCT S+ U
EXP MODE
0 +OCT
S.LE VEL U.LE VEL
SUB
UP
U.TO NE
SMOO TH
DRY