Mooer GE 200 User manual

This guide is designed to get you set up and playing through your GE200 as fast as possible.
For the complete manual, please visit the official MOOER website at www.mooeraudio.com.
GE 200
Amp modelling & Multi Effects
快速指引
Schnellstartanleitung
Guide de Démarrage Rapide
Guia de inicio rápido
Guia Rápido
EN
CN
DE
SP
JP
FR
PT

Contents
01
.................................................................
Patches selection
Editing
Saving Presets
Expression Pedal
CTRL/TAP
Looper
Tuner
Rhythm
01
.................................................................
01
.........................................................
02
.................................................................
02
.................................................................
03
05
.........................................................
04
06
Trail
06
.........................................................
Looper Mode
.......................................................................
............................................................
.........................................................

目 录

Contents(PT)

Contents(SP)

Contents(JP)

Contents(FR)

Contents(DE)

Patches selection
01
Connect the included power supply to the GE200. The GE200 will then boot into the
main interface.
PLAY/CHAIN mode: switch the preset tone by , , or rotate the VALUE knob, press
or to pin and hold for 1 second to achieve fast switching.
In CHAIN mode, the order of effects chain can be adjusted by using the VALUE button.
Three types of preset packs!
P001-P050 with AMP and CAB activated. It is recommended to use when connecting
to full-range devices (headphones, sound card, mixer, full-range speakers, etc.)
P051-P100 with AMP enabled. It is recommended to connect to the guitar speaker's
RETURN interface or later.
P101-P150 with AMP and CAB off. It is recommended to directly connect the INPUT
of the speaker.
P151-P200 Blank patches.
Editing
Saving
ON/OFF
Press the effect blocks to turn on/off respective effect modules.
1.Press the module button to enter the editing interface.
2.Select the item to be adjusted by rotating the VALUE knob
3.Press VALUE knob to enter the tone type selection or edit parameters.
4.Rotate VALUE to change the effect type or parameter, and press VALUE again to
return to the item to being adjusted.
Editing
1. Press the SAVE button.
2. Press the , or rotating the VALUE knob to select the storage position.
3. Press VALUE to confirm the storage slot.
4. Press VALUE to select the character at the current position, press again to
complete the editing
5. After editing the name, press the SAVE button. Press any button other than SAVE
or VALUE before the last step to discard the save operation.

Expression pedal setting
02
The CTRL/TAP footswitch has 2 main functions
To switch between these two functions press and hold the CTRL/TAP footswitch for
a second
Press the CTRL/TAP button to enter the setup screen for the CTRL/TAP footswitch.
Use the VALUE control to select one of the two options.
Select TAP to make the default function of the CTRL/TAP footswitch
“TAP TEMPO” within the preset
Select CTRL to assign effects blocks to be switched on/off using
the CTRL/TAP footswitch
Use the VALUE control to highlight and select which effects blocks you wish to assign
to be switchable using the CTRL/TAP footswitch.
CTRL/TAP footswitch is also used to confirm preset selection when using FOOTSWITCH
CTRL: Toggle assigned effects blocks on/off
TAP: Tap the footswitch multiple times to control the tempo of your delays
CTRL TAP
CTRL
TAP
CTRL SETTING
FX/COMB
CAB
MOD
NS EQ
DELAY REVERB
DS/OD AMP
CTRL/TAP
MODE 2 (see the settings menu)
The GE200 has a built-in pedal (EXP) and an external pedal interface (EXP2). The
EXP2 requires a 6.35' stereo cable to connect to the external expression pedal. EXP1
and EXP2 both can be manipulated in the EXP menu.