Moorebot Scout User manual

SCOUT
AUTONOMOUS
HOME ROBOT
QUICK START GUIDE

Mecanum
Wheels
Charging
Station
WiFi Direct
Mode Indicator
Infrared LED
TOF Sensor
&
Light Sensor
microphone
WiFi Router Mode
Indicator
WiFi Mode
Select Button
Product Overview
What’s in the box?
Scout Robot
Charging Station
(2)Adhesive tape
Type-C USB cable
Quick Start Guide
Lubricant for Mecanum
wheels
* Scout is not supplied with a USB power adaptor. It is recommended to use a USB adaptor with
5V and >2A output.

Place the Charging Station
Charge the Battery
Affix the Charging Station to the floor or wall using
the supplied adhesive tape.
Plug the Type C USB cable into the Charging
station and into a 5V > 2A USB adapter (not
supplied)
Place the rear of Scout in the Charging Station making sure it’s in contact with the charging pins.
You will see 4 blue flashing LEDs on the top of Scout and hear a tone confirming Scout has
connected and is charging.
All 4 LED lights will remain lit when Scout is fully charged. This may take up to 3 hours to
complete.
* The Charging Station must be affixed to a stable surface. If
placing on carpeting it is recommended to use the adhesive tape
to affix to the wall or baseboard.

Download the Scout App
The Scout App walks you thru the setup and is
required to control your Scout. There are two ways
that a mobile phone or tablet can connect to Scout,
Wi-Fi Direct Mode, and Wi-Fi Router Mode.
Search for “Moorebot Scout” in the Apple App
Store or Google Play and download to your Apple
or Android device.
The Scout App supports Smartphones or tablets
with Android OS 6.0 and later or iOS 11.0 and later.
Scout is optimized for the 5GHz Wi-Fi band.
Your Home Wi-Fi password is required to complete
setup and if you want to access Scout remotely.
Write it down below so it’s handy when you need it
during setup.

Sign up your Moorebot Account
Open the Moorebot Scout App and follow the
instructions to set up your Moorebot account to
register and control your Scout.
You will be receiving a confirmation code to the
email address you use so be sure to check your
spam folder or whitelist emails from
[email protected]

Complete the Setup
Make sure your Scout in the Charging
Station and follow the instructions in the
App.
Go the Wi-Fi settings of your Smartphone
or Tablet and choose the network
robot_scout_XXXXXX The default
password is r0123456.
Next choose a new password for your
Scout.

Complete the Setup
The App will automatically switch Scout to
the Wi-Fi Router Mode.
Choose your Home network and enter the
password.
Finally check the settings Tab and see if
there is new Firmware Update available.

If you need additional help setting up your Scout go
to Moorebot Support [email protected]
or call [phone]. To review your warranty
coverage, please visit www.moorebot.com/pages/
warranty.
You are all done and ready to enjoy your Scout!
For more information on all the features and
controls of Scout visit www.moorebot.com/pages/
download or scan the QR code for the full Owners
Manual.