Morgan MIC-BB20EC User manual

E-mail: [email protected]
Market Expansion
Services by
www.dksh.com
USER MANUAL
Induction
Cooker MIC-BB20EC
MIC-BB20EC#4.11.09 11/4/09 11:48 AM Page 1

CONTENTS
3
4
5
6
6
6
Important
Instructions For Use
Trouble Shooting
Usable and Non-usable Utensils
How To Clean
Specifications
MIC-BB20EC#4.11.09 11/4/09 11:48 AM Page 2

4
INSTRUCTIONS FOR USE
1. ON/OFF SWITCH
• Connect power supply. The buzzer will sound, indicating that the induction cooker is
on standby mode and the fan will begin operation. The display show “- - - -”, If there
is no operation, induction cooker will automatically switch off.
* Start up functions: press the On/Off button or any function key, the buzzer sound if
there is no pot on the heating plate. If there is still no pot on the heating plate, the
buzzer will sound for 30 seconds and the fan will work for one more minute then
automatically switch off. If a pot is placed on the heating plate, the unit will resume
start up operation.
2. STEAM
• When power is on, select the “Steam” function and the respective indicator light will
illuminate.
3. PORRIDGE
• When power on, select the “Porridge” function, the respective indicator light will
illuminate.
• When the congee is finished, the screen will display “End”. It will automatically
switch to “Keep Warm” mode for 2 hours with the respective indicator light
illuminated.
4. SOUP
• When power on, select the “Soup” function and the respective indicator light will
illuminate
• When soup is finished, the screen will display “End”. It will automatically switch to
“Keep Warm” mode for 2 hours with the respective indicator light illuminated.
5. STIR FRY
•When power on, select the “Stir Fry” function, the respective indicator light will
illuminate.
• Adjust the temperature accordingly.
6. BARBECUE
•When power on, select the “Barbecue” function, the respective indicator light will
illuminate.
• Adjust the temperature accordingly.
5
7. STEAM BOAT
• When power is on, the cooker will enter the steam boat mode and the “Steam Boat/
Power” light will illuminate.
• Adjust the power
• Press the “Timer”, set the time for power off. The screen will display the remaining
time before power off. If required, you may revise the set time for power off.
8. ELECTRICITY VOLTAGE
• When the induction cooker is working, press “Electricity Voltage”, the display show
the electricity voltage from start up till now, Press “electricity voltage” again to
display current voltage for about 10 seconds before reverting to normal operation
mode.
9. PAUSE
• When the induction cooker is on “Stir Fry” or “Steam Boat” modes, pressing the
“Pause” key will halt the operation. The display will show “STOP”. Press “Pause”
again to resume operation.
TROUBLE SHOOTING
PROBLEM POSSIBLE REASONS SOLUTIONS
E1 The induction cooker is left on The unit will automatically shut down
without a pan or with an and will only operate again when the
incompatible pan. right or compatible pot is in used.
E2 Induction heat emitter has The unit will operate again once the
overheated (>105ºC) PCB board has cooled down and back
to room temperature.
E3 Supply voltage exceeded 270V The unit will operate again when supply
voltage is back to normal.
E4 Supply voltage is lower than The unit will operate again when supply
145V voltage is back to normal.
E5 Thermal sensor has overheated. Switch off the unit and let the unit to
cool down until the thermal sensor is
back to room temperature.
E6 The inner pot has overheated Switch off the unit and let the unit to
cool down before operating again.
(Note: BBQ & Stir fly function is without this feature.)
E0 Inner Circuit Malfunction Switch off the unit and send back to
nearest authorized service agent.
MIC-BB20EC#4.11.09 11/4/09 11:48 AM Page 3

6
USABLE AND NON-USABLE UTENSILS
HOW TO CLEAN
SPECIFICATIONS
1. USABLE PANS
Steel, cast iron, enamelled iron, stainless steel, flat-bottom pans/pots with 12 to
26cm diameters.
2. NON-USABLE PANS
Heat-resistant glass, ceramic container, copper, aluminium pans/pots. Rounded-
bottom pans/pots with bottom measuring less than 12cm.
1). Disconnect plug and wait until the unit has cooled down completely. Clean after
every use.
2). Discolouration or stains may appear if pots/pans used are not clean.
3). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the
induction cooker.
4). Use only a damp, clean cloth with a bit of mild dish washing agent to clean the
unit’s exterior.
5). Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6). Do not immerse the unit in water or other liquids as this may result in malfunctions).
MODEL MIC-BB20EC
RATED VOLTAGE / FREQUENCY 220-240V~ 50/60Hz
RATED WATTAGE 2000W
3
IMPORTANT
Please read the following instructions carefully before using the induction cooker.
1. Do not insert power cord into power outlet with wet hands.
2. Do not plug into a socket where several other appliances are plugged in.
3. Do not use if the power cord is damaged or the power plug does not fit the socket
securely.
4. Do not modify the parts, or repair the unit by yourself.
5. Do not use the unit near open flame or wet places.
6. Do not use where children can easily touch the unit, or allow children to operate the
unit by themselves.
7. Do not place on unstable surfaces. Always place on solid and level surfaces.
8. Do not move the unit when the pot or the pan is on it.
9. Do not place an empty pot on the heating plate or overheat the pot.
10. Do not place metallic objects such as knives, forks, spoons, lids, cans, and
aluminium foils on the heating plate.
11. Operate the unit with sufficient ventilation around it. Keep the front and the right or
left side of the unit free from any obstruction.
12. Do not operate the unit on carpet or tablecloth (vinyl) or any other low-heat-resistant
article.
13. Do not place a sheet of paper between the pot or the pan and the unit. The paper
may get burnt.
14. If the surface is cracked, please switch off and have it inspected at your nearest
authorized service center immediately.
15. Do not block the air intake or exhaust vent.
16. Do not touch the heating plate right after removing the pot or the pan, as the heating
plate will still be very hot.
17. Do not place the unit close to objects sensitive to magnet, such as: radios,
televisions, automatic-banking cards and cassette tapes.
18. The power cord must only be replaced by qualified technicians.
MIC-BB20EC#4.11.09 11/4/09 11:48 AM Page 4