Morgan MIB-6618SS User manual

SER MAN AL
Instant
Boile MIB-6618SS
E-mail: [e-mail]
www.morgan.my
Market Expansion
Services by
www.dksh.com.my
facebook.com/morganappliances

SPECIFICATIONS
PARTS IDENDIFICATION
32
1. Top Cover
2. Control Panel
3. Lamp
4. Water Spout
5. Main Body
6. Dispenser Drip Tray
7. Lid
8. Tank
9. Water Level Indicator
10. Base
Thank you for purchasing a quality MORGAN Instant Boil Water Dispenser. We trust
that you will have a pleasant experience with your new product. To guarantee safety
and best efficiency, please read this manual carefully and keep a copy for future
reference.
RATED VOLTAGE / FREQ ENCY 220-240V~ 50/60Hz
RATED WATTAGE 2200-2600 W
CAPACITY 4.0 L
C O N T E N T S
3
3
4
7
Parts Identification
Specifications
Operating Instructions
Cleaning and Maintenance

5
OPERATING INSTRUCTIONS
4
OPERATING INSTRUCTIONS
CONTROL PANEL
LOCK button: press and hold for 3 seconds to unlock. The system will automatically lock
down if there is no further activity within 10 seconds. To unlock the control panel, press
and hold the lock button again.
TEMP button: Set the desired temperature according to 55˚C, 65 ˚C, 75 ˚C, 85˚C, 100 ˚C,
and 000 (normal temperature water)
VOL. button: Set the water volume according to 100ml, 200ml, 300ml, and 000(flow water
continuously)
Comfirm button: Start and stop function settings
FIRST TIME USE
Clean the water tank thoroughly before use. Always unplug the power plug from the power
supply and allow the appliance to cool down completely before carrying out cleaning and
maintenance. Wipe the surface of the appliance with a damp cloth and polish with a soft
dry cloth.
1. FILLING WATER
Open the lid, fill the water tank with the desired amount
of water, and then close the lid.
NOTE: the water level must not exceed the “MAX” level
nor should it be below the“MIN” level.
NOTE: It is recommended to discard any remaining
water inside the water tank.
2. FILL WATER
– Ensure that the power plug is connected to the power supply, and fill in the water with
desired amount.
– Place a cup on the dispenser drip tray, aligning with the spout.
– Press and hold the LOCK button for about 3-5 seconds. The TEMP and VOLUME
setting indicator will illuminate.
– Press the TEMP button to choose your desired temperature and press the VOL.
button to set the desired water volume.
– Press the COMFI M button to operate the appliance, and in about 5-10 seconds, the
desired water will flow out continuously from water spout.
– Press the COMFI M button again to stop operating the appliance (If you want to stop
the water).
– epeat the above procedure to dispense water once more.
NOTE: When using for the first time, select 000 temp. and 000 vol., and keep water
running for 3 seconds.
IMPORTANT!
1. Exercise extreme caution! Boiled water and steam is extremely hot!
2. If the appliance stops operation when an alarm sounds and the control panel displays
an E7 symbol, it shows that there is insufficient water inside the water tank. eplenish
water into the water tank immediately.
3. The appliance is able to memorize the last used operation without disconnecting power.
4. As the appliance has a memory function when connected to the power supply, operate
the appliance for about 60 seconds to obtain desired temperature water, otherwise its
memory will be erased upon unplugging.
5. As ambient temperature changes every day,
the water volume will vary within -15% to
+15%
6. This appliance features a manual thermostat
cut-off to protect it in the event of
overheating or a malfunction. You can
reset the thermostat by using a reset
key easily.

76
OPERATING INSTRUCTIONS
3. DISPOSING WATER FROM THE
DISPENSER DRIP TRAY
To dispose water when the dispenser drip tray is
full, use one hand to firmly grasp and stabilize
the appliance by one hand and another hand to
lift up the dispenser drip tray slightly to remove
it. Proceed to empty water inside the dispenser
drip tray insert it into its proper place.
1. Always switch off and unplug your appliance from the power supply and allow it to
completely cool before cleaning and maintenance.
2. Do not immerse the appliance into water or any other liquids to avoid damaging it.
3. To maintain optimal performance, it is recommended to descale the appliance
periodically. Use only toxic free descaler such as citric acid. Add citric acid into water
proportionately. Boil and reboil water three (3) times to completely remove the
limescale. Discard any remaining water during descaling.
4. Do not use any chemical, metal, wood or abrasive cleansing agents to clean the
appliance housing. Always use a damp cloth.
5. Always handle the appliance with care. Avoid placing it near the edge of the table and
counter tops to protect against deforming or damaging the appliance in case it
accidentally topples over.
STORAGE
If the appliance is not going to be used for a long duration, clean and unplug it from the
power supply and place it back into its original packing box to prevent humidification or
damage to the electrical components.
Environment friendly disposal
Open the drainage stopper after cleaning the
appliance in order to remove any water
residuals.
NOTE: Tighten the drainage stopper after
opening it.
CLEANING AND MAINTENANCE