Morphy Richards Equip MREK1B User manual

INSTRUCTION MANUAL
Model: MREK1B
Read these instructions carefully before
using this appliance for the rst time.
STORE THESE INSTRUCTIONS CAREFULLY
Equip 1 Litre Kettle
www.morphyrichards.com.au

2
SPECIFICATIONS
Model: MREK1B
Colour: Black
Rated Voltage: 220-240V
Rated Power: 1850-2200W
Capacity: 1L
External Dimensions (L x W x H): 230 x 154 x 202mm
Net Weight: 0.81kg
NAMES OF KETTLE PARTS
Switch
Handle
Lid button
Spout
Kettle lid
Body
Water
gauge
Power
base

3
WARNING: Please read these instructions carefully before
using the product.
• Avoid spillage on the connector.
• The use of any electrical appliance requires the following
common sense safety rules. Please read these instructions
carefully before using the product.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.Cleaning and user maintenance
shall not be made by children without supervision.
• Cleaning and user maintenance shall not be made by
children.
• This appliance is intended to be used in household and
similar applications such as: farm houses; by clients in
hotels, motels and other residential type environments; bed
and breakfast type environments. It is not suitable for use
in sta kitchen areas in shops, oces and other working
environments.
• Misuse of the appliance could cause personal injury.
• Always locate your appliance away from the edge of the
worktop.
• Ensure that the appliance is used on a rm, at surface.
• Do not use the appliance outdoors or near water.
IMPORTANT SAFETY INSTRUCTIONS

4
WARNING: Do not place the appliance onto a metal tray or metal
surface whilst in use.
• Do not let the mains cable hang over the edge of the worktop
where a child could reach it.
• Do not let the mains cable run across an open space e.g.
between a low socket and a table.
• Do not let the mains cable run across a cooker or other hot
area which might damage the cable.
• The mains cable should reach from the socket to the base unit
without straining the connections.
• If the mains cable is damaged, it must be replaced by the
manufacturer, it’s service agent or similarly qualied person in
order to avoid a hazard.
WARNING: To protect against re, electric shock and personal
injury do not immerse cord, plug and appliance in water or any
other liquid.
• Always keep the top of the cordless base dry, especially
around the connection area, disconnect the power supply
before drying.
• Allow to dry thoroughly before reconnection to the power
supply.
• Do not ll above the MAX mark, otherwise boiling water may
be ejected.
• Always pour hot water slowly and carefully without tipping the
appliance too fast to prevent splashing and spillage.
WARNING: Do not open the lid whilst the water is boiling.
• Do not hold the switch in the on position or tamper with the
switch to x it in the on position as this may cause damage to
the switch-o mechanism.

5
• Unplug from the outlet before cleaning.
• Allow to cool before putting on or taking o parts and
before cleaning.
WARNING: The heating element surface is subjected to
residual heat after use
CAUTION: Do not operate the kettle on an inclined surface. Do
not operate the kettle unless the element is fully immersed. Do
not move the kettle while it is switched on
OTHER SAFETY CONSIDERATIONS:
• The use of attachments or tools not recommended or sold
by Morphy Richards, may cause re, electric shock or injury.
• The kettle is only to be used with the stand provided.
• Do not use the appliance for any use other than to boil
water.
• Do not place the appliance on or near a hot gas or electric
burner or in a heated oven.
• The appliance must not be on the base unit when being
lled with water.
• Unplug from the outlet when not in use.
WARNING: The appliance must not be immersed for cleaning.
CAUTION: To prevent damage to the appliance, do not use
alkaline cleaning agents when cleaning. Use a soft cloth and
detergent..
• This appliance must be used in accordance with the
instructions and must not be used for other purposes.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

6
Empty the water out of the kettle after rst boiling to clean away any
deposits that are left in the kettle after the manufacturing process.
Descale as appropriate for the hardness of the water in your area. It is
important to descale as the performance of the kettle and auto switch-
o will be impaired.
Safety rst
Always pour water slowly and carefully to prevent the splashing of
scalding water.
Fast boil kettles perform dierently. If your kettle is a fast boil model, it
may sound louder during boiling, and switch o suddenly with no after
noise.
This is normal.
1. Run cold water over the aected area immediately. Do not stop to
remove clothing.
2. Get medical help quickly.
IMPORTANT INFORMATION
TREATING SCALDS

7
INSTRUCTIONS FOR USE
1. Place the kettle on the at surface.
2. To ll the kettle, remove it from the power base and open the lid by
pressing down lid release button, then ll the kettle with the desired
amount of water and close the lid. The water level must be within the
Min and the Max level. Too little water will cause the kettle switching
o before the water has boiled.
NOTE: Do not ll the water over the maximum level, as water may
spill out of the spout when boiling. Ensure that the lid is rmly in place
before plugging the power outlet.
3. Position the kettle on the power base.
4. Switch the kettle on. The‘power on’ neon will light up.
5. When the water boils the kettle will switch o automatically.
• If you are using the kettle for the rst time, pour away the boiled
water and rell.
6. Lift the kettle from the base unit by the handle ensuring you hold the
kettle level.
• To reboil, switch to ON again. If the kettle has just switched o wait
a minute or so before switching it back on again.
NOTE: Ensure that switch is free of obstructions and the lid is rmly
closed, the kettle will not turn o if the switch is jammed down or if the
lid is open.
If you do not put in enough water, or switch on the kettle when it is
empty, the safety cutout will switch o the power automatically. If this
happens, rell and wait a few minutes for the element to cool, then use
as normal.

8
Your kettle should be periodically descaled as the mineral deposits in
tap water may form scale on the bottom of kettle so as to cause it to
operate less eciently. You can use commercially available descaler
and follow the instructions on the package of descaler. Alternatively,
you may follow the below instructions using white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then add enough water
to cover the bottom of kettle completely. Leave the solution in the
kettle overnight.
2. Discard the mixture in the kettle, then ll the kettle again with clean
water to the maximum position, boil and discard the water. Repeat
several times until the odor of vinegar has been ushed away. Any
stains remaining inside the spout can be removed by rubbing with a
damp cloth.
3. Wipe the outside of the kettle thoroughly with a damp cloth to
remove all traces of vinegar residue which may damage the nish.
IMPORTANT: Ensure that the electrical connections are completely dry
before using the kettle.
DESCALING

9
MAINTENANCE
If the unit fails to operate eciently, is broken or other problems arise,
unplug and do not operate.
Ask for advice by calling your local after sales service agent or the
Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ).
WARRANTY
Please refer to the warranty card in the box for warranty information.
For any troubleshooting advice, please contact the relative Customer
Care Centre below.
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd
8 Lakeview Drive, 38 Harris Road, East Tamaki,
Scoresby 3179, Victoria Auckland 2013
Australia New Zealand
Ph: 1300 556 816 Ph: 0800 666 2824

10
NOTES