Morris S1254BLG User manual

BLENDER WITH GLASS JAR 1.7L AND COFFEE
GRINDER
MODEL NUMBER: S1254BLG
INSTRUCTION MANUAL
In order to have the product work better for you, please read the instructions before using
it. Please keep the instructions after reading for future reference.

ATTENTION:
●Wrong operation and improper handling may cause problems with the appliance and
injury to the user.
●The unit should be used only for the intended purposes. No liability is accepted by our
company for damages arising from improper use or faulty handling.
●Before connecting the device to the mains, please check whether the type of supply and
the mains voltage match with the details stated on the nameplate on the appliance.
●Do not immerse the appliance and mains plug in water or other fluids. If the appliance
falls into water, pull out the power plug immediately and have the appliance checked by a
specialized technician before using it again. There is danger to life from electrical shock!
●Do not try to open the housing yourself! Do not insert any object into the housing.
●Do not use the appliance with wet hands, on wet floor or in a humid environment.
●Do not hold the mains plug with wet or moist hands.
●Check the mains plug and mains adapter regularly for damages. In case of damages,
have the power cord and mains plug changed by the manufacturer, or a qualified expert,
in order to avoid danger.
●Do not operate the appliance, if the power cable or the mains plug appear to be
damaged or the unit falls to the floor or has been otherwise damaged. In such cases, bring
the unit to a workshop for checking and repairs, if necessary.
●Do not ever try to repair the unit yourselves. There is danger from electrical shock!
●Do not let the power cord hang over sharp edges and keep it away from hot objects and
flames. Pull the plug, not the cord, to remove it from the socket.
●Installation of a spike protector will offer additional protection with a nominal trigger
current of not more than 30 Ma in the house installation. Please consult your installing
electrician.
●The cable as well any extension cable required should be laid in such a way that there
will not be any risk of anyone pulling it inadvertently or tripping over it.
●If a long extension cable is used, it must be suitable for the power supply in question.
Otherwise it causes overheating of the cable and/ or plug.
●Install the unit on a rigid, flat and heat-proof surface, away from flames (such as gas
oven) and do not operate it near children.
●This appliance is suitable neither for commercial use nor for use outdoors.
●Children cannot understand the dangers caused by improper handling of electrical
devices.
●Therefore, let children use household devices only under supervision.
●Pull out the plug out of the socket, when the appliance is not in use and also before
cleaning it.
●Caution! The appliance is on power so long as it is connected to the power circuit.
●Switch off the unit before pulling out the mains plug.
●Use only spare parts from the manufacturer or his local dealer.
●Never carry the unit by its power cord.
●Do not remove individual housing components.

Caution:
Switch off the unit before cleaning it to avoid electric leakage and other dangers. When
the plug or power cord are damaged, do not use the unit. Never disassemble the unit by
yourself, you must take it to the after-service center for handling.
PARTS ITEM
1. Measure cup
2. Jar cover
3. Glass jar
4. Glass jar sealed ring
5. Blade components
6. Jar holder
7. Main body
8. Power cord&plug
9. Skidproof glue feet
10. Rotating switch
11. Aureola
12. Function button
13. Upper base of housing
14. Grinder jar
15. Grinder’s jar sealed ring
16. Blade components
17. Grinder’s jar holder

Installation
1．Clean the Measuring cup, Lid and Blending glass cup (except main body) and so on
before first use.
2．So as to make sure the unit is turned off, do not connect it before installation.
3．First install the Glass jar sealed ring into blade base, then enclose the blade base into
Blending glass jar and finally screw the jar holder on the base of the glass jar.
4．Now you can place the entire glass jar on the top of the main body of the motor. Please
pay attention to match the position of blending glass cup and the bulge of the motor main
body.
Fill the blending receptacle with the desired food. Please ensure the water is not spilled
over from cup.( Maximal water capacity can not exceed 1700 ml). DO NOT USE THE
UNIT WITHOUT ANY MATERIAL INSIDE.
5．Put the lid on top of the blending glass cup and push it down. Insert the closure into the
lid and turn till it locks into place.
6. Place the measuring cup on the center of the lid; turn the measuring cup slightly
anticlockwise.
OPERATION
1．Connect to the power. Please ensure the rotating switch is turned to “OFF” before
connecting the power.
2．This unit has safety design features, it will not work if the blending glass jar is not
installed properly on the main body of the motor.
3．Fill the glass jar with the desired food.
4. Put the jar cover on top of the blending glass jar and fix it. Place the measuring cup on
the center of the jar cover, turn the measuring cup slightly anticlockwise.
5．Put the glass jar on the upper base of the main body. The blue light of Aureole means
that power is connected.
6. If you want to use the grinder, open the grinder jar, then put the coffee beans into the
grinder jar. The coffee bean cubage should be less than 60% of the total grinder cubage.
It is better this way. Fit and tighten on the grinder jar the grinder’s jar sealed ring, the blade
components and finally the grinder’s jar holder . Then, put the whole grinder into the upper
holder of the housing. You can start blending coffee beans.

7．When you turn the knob to ”ON”, the functions of “SMOOTHIE”（milk shake）、“ICE” and
“PULSE” are available. Press one of the buttons, that button lights up and starts.
8．To choose the speed from the knob, please turn the knob between “MIN” (low speed)
and “MAX” (high speed) in order to select the required speed.
8．Please stop the appliance after operating it continuously for 1 minute.
Speed adjustment and function button
1. SMOOTHIE
——Stainless steel blade base stays at high speed, suitable for uniform blending.
2. ICE
——Stainless steel blade base stays at high speed, running for 6 seconds then stops for
3 seconds, suitable for blending ice.
3. PULSE
——Keep this button pushed. Stainless steel blade base stays at high speed, and unit
stops working after you let it go.
4. MIN
——Stainless steel blade base stays at low speed.
5. MAX
——Stainless steel blade base stays at high speed.
6. ON
——The unit connected to electricity and the functions “SMOOTHIE”、“ICE”
and “PULSE” are available.
7. OFF
——Not connected to electricity.
Caution:
1. Overfilling may block the operation, please turn off the unit and disconnect the
plug, take out some of material, then operate.
2. Do not use the unit continuously for more than 1 minute.

CLEANING AND STORAGE
1. In addition to this section, you must refer to the security precautions too.
2. Do not clean the Motor main body, power cord and plug with water.
3. Clean the engine base with a soft, wet piece of cloth and a mild cleaning agent.
4. Fill the glass jar half-full with hot water and a small quantity of a cleaning agent. Let the
unit run on min (minimum) speed until the glass jar is clean.
5.The base can be taken apart from the blades . Unscrew the base counter-clockwise.
Take out the blades together with the sealing ring facing upwards.
6. Now clean the glass jar, jar cover, closure, base and blades with sealing ring or speed
blender with hot water and some cleaning agent. Dry well before re-using.
Caution! The blades inside the glass jar and speed blender are very sharp.
7. Never use drastic cleaning agents.
Warning:
Do not touch the sharp blades while cleaning, please wipe with a dish cloth, to
avoid accidental injury.
SPECIFICATION
Rated voltage : 230V/50Hz
Power ：700W
Capacity ：1.7L
Operating time ：1 minute
NOTE：
1. Unit suitable for household use only.
2. Do not use for commercial purposes, otherwise the exclusive
importer bears no responsibility for any damage.

Notice about recycling
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection systems for used
electrical and electronic products. Please help us to conserve the environment we live in!
DECLARATION OF
CONFORMITY
This product complies with the requirement of directives
EMC-Directive: 2004 / 108 / EC
Low Voltage Directive: 2006 / 95 / EC
CE Marking: 93 / 68 / EEC
ErP Directive: 2005 / 32 / EC
declare that the Blender model: S1254BLG
is in compliance with following norms:
EN 55014-1:2006
EN 55014-2:1997+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
EN 60335-2-14:2006
EN 50366:2003+A1:2006
EN 62301:2005
Amiridis – Savidis S.A.
EXCLUSIVE IMPORTER IN GREECE:
33, Vas. Olgas Street – P.O. 54641 – Thessaloniki, Greece.
Tel: [phone], Fax: [phone]
45 Posidonos St. – O.P. 18344 – Moschato,Athens, Greece
Tel: [phone], Fax: [phone]
www.morris.gr | [e-mail]