Mosaic URC 9950 User manual

Mosaic UG rev2 8/30/01 9:07 AM Page 1001

INSTALL BATTERIES
1. On Mosaic’s back side, push the tab and lift off
the battery cover.
2. Obtain four (4) new AA alkaline batteries. Match
the + and – marks on the batteries to the + and
– marks in the battery case. Then insert the new
batteries, as shown on right.
3. Align the cover’s keys with the opening’s holes
and press the cover back into place.
4. You will see the Mosaic Welcome screen, followed by the Device screen.
USING THE TOUCH SCREEN
Mosaic features a Touch Screen that responds to
touch commands, whether you use the supplied
Stylus or your finger tip. Each time you tap on the
screen, you’ll see the LED blink and hear a beep
tone, which serve as visual and audio confirma-
tion of your command.
After 20 seconds of inactivity, Mosaic will turn
off the LCD screen to conserve battery life.
CONTROLLING DEVICES
QUICK STARTMOSAIC
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR
CBLTV VCR
THEATERSetup
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR TV/VID PWR
CBLTV VCR CBLTV VCR
THEATERSetup THEATERSetup
Tap on
next
device.
Current
active
device
Current
active
device
Tap on scroll arrow
to see other devices.
Remote Control
Keys for active
device
Tap on pages
to see more
Remote Control
Keys.
Mosaic UG rev2 8/30/01 9:07 AM Page 1002

Touch Screen Control Device
User’s Guide
Mosaic UG rev2 8/30/01 9:07 AM Page 1

Table Of Contents
CHAPTER 1: INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . 7
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PRODUCT SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
EASE OFUSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PERSONALIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
COMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ERGONOMIC DESIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ABOUT THIS GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ORGANIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CONVENTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CHAPTER 2: GETTING STARTED . . . . . . . . . . . . . . . . . . . 11
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ABOUT BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INSTALLING BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
LOW-BATTERY INDICATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HOW TOUSE MOSAIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LOCATIONS OFCONTROLS AND CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE HARD KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
USING THE TOUCH SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
USING THE SETUP HELP SCREENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CHAPTER 3: SETTING UP MOSAIC . . . . . . . . . . . . . . . . . 21
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SETUP BYBRAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SETUP BYSEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SETUP BYCODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DELETING A DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ADDING NEW CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ABOUT LOCKING SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CHAPTER 4: PERSONALIZING MOSAIC . . . . . . . . . . . . . . 39
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
USING MACROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ADDING A MACRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2Table of Contents
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 2

VIEWING MACROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
COPYING MACROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
DELETING A MACRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DELETING ALL MACROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
USING KEY MOVER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
MOVING A KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DELETING ALL MOVED KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
USING LEARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
LEARNING A FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
DELETING ALL LEARNED FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
LABELING KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
LABELING DEVICE KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
LABELING FUNCTION KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
USING KEY MAGIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ADDING A KEY MAGIC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DELETING ALL KEY MAGIC FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
USING VOLUME LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
LOCKING THE VOLUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
UNLOCKING THE VOLUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
USING VIEW/DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
HOME THEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
PROGRAMMING HOME THEATER DEVICES. . . . . . . . . . . . . . . . . . . . . . . . . . . 67
PROGRAMMING THE HOME THEATER POWER MACRO . . . . . . . . . . . . . . . . . . . 70
VIEWING THE HOME THEATER POWER MACRO . . . . . . . . . . . . . . . . . . . . . . . 71
DELETING THE HOME THEATER POWER MACRO. . . . . . . . . . . . . . . . . . . . . . . 71
CHAPTER 5: MOSAIC SYSTEM . . . . . . . . . . . . . . . . . . . . 73
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
UPGRADING CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
UPGRADING CODES USING YOUR PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
UPGRADING CODES USING YOUR TELEPHONE . . . . . . . . . . . . . . . . . . . . . . . . 76
ALIGNING THE LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SOUND CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
LOCK SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
RESETTING THE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
ABOUT MOSAIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Table of Contents 3
USER’SGUIDE
Mosaic UG rev2 8/30/01 9:07 AM Page 3

FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection against
harmful interference in residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a different circuit from the receiver. Consult the dealer
or an experienced radio/TV technician for help.
NOTE: If serial or parallel ports are configured, a filtered/shielded serial or parallel cable is recommended to minimize
EMI and ensure FCC B compliance.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause unde-
sired operation.
Changes or modifications not expressly approved by the party responsible for compliance void the
user’s authority to operate the equipment.
ADDITIONAL INFORMATION
Mosaic does not have any user-serviceable parts. Opening the case, except for the battery cover, may
cause permanent damage to your Mosaic. For help with upgrading your Mosaic codes via the
Internet, see Chapter 5: Mosaic System – About Mosaic on page 82.
MOSAIC™Touch Screen Control Device
Designed with UEI TechnologySM
U.S. Patents
5,414,761 5,552,917 5,228,077
5,255,313 5,698,353 5,959,751
5,515,052 5,537,463 5,614,906
6,014,092 and other patents pending
©2000 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, tran-
scribed, stored in any retrieval system, or translated to any language, in any form or by any means,
electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission
of Universal Electronics Inc.
4FCC Notice/Additional Information
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 4

UEI’s policy is one of ongoing product revision and improvement. UEI thus reserves the right to
make changes to its products or product specifications at any time and without prior notice. The
information contained in this publication has been carefully checked and is believed to be accurate at
the time of publication. However, UEI assumes no responsibility for errors or omissions, or for any
consequences resulting from the use of the information contained therein.
The Mosaic logo is a trademark of Universal Electronics Inc. UEI Technology is a service mark of
Universal Electronics Inc. The Universal Electronics logo is a registered trademark of Universal
Electronics Inc.All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
Manual–M2000 rev2 9/01
Additional Information 5
USER’SGUIDE
Mosaic UG rev2 8/30/01 9:07 AM Page 5

NOTES
6
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 6

Chapter 1:
Introduction
OVERVIEW
This chapter provides a product and feature summary for the Mosaic™Touch Screen
Control Device by Universal Electronics.At the end, you’ll also find a section on how
this user’s guide is organized and an explanation of its conventions.
PRODUCT SUMMARY
It’s hard to believe that a remote control this advanced could also be this easy.With
Mosaic™by Universal Electronics, you can personalize different screens to access and
operate any home entertainment system according to your needs. Our patented features
and proprietary software, such as learning, macros, Key Mover,andKey Magic,makeit
all possible.
Like everything else from Universal Electronics, Mosaic includes the world’s largest
infrared code library, so it’s compatible with virtually everything. Moreover, its patented
upgradeability means it won’t be obsolete tomorrow.
EASE OF USE
From the easy-to-view large touch screen and convenient home theater mode, to the
ready-to-use dynamically-generated device screens, you will find Mosaic is the most
user-friendly control device on the market. Ease-of-use features include:
•Dynamically-generated device keys that are based on a specific device code to
ensure you will not need to modify keys for each device.
•Control of up to 15 devices so you can set up any combination of up to 15 device
types, complete with appropriate keys per selected device.
•Easy device setup so you can program Mosaic by device code, by device search, or
by brand, for fast device setup.
•A home theater mode that combines different device applications under one mode
for operating convenience.
continued on next page...
Overview/Product Summary 7
USER’SGUIDE
Mosaic UG rev2 8/30/01 9:07 AM Page 7

PRODUCT SUMMARY
EASE OF USE (CONTINUED)
•Help screens that include setup and operational instructions, minimizing the need
for you to continually reference the instruction manual.
•User feedback to confirm action by visual and sound feedback (on/off option).
•Lock control to prevent accidental erasing of device codes and user personalization.
•On-screen low battery indicator to advise you when batteries are low.
•Non-volatile memory to ensure Mosaic will not lose programming, even when the
batteries are removed.
PERSONALIZATION
As a result of our proprietary software and patented features, Mosaic provides the most
extensive personalization features available today. In fact, you can personalize them right
on the remote control instead of having to use complicated personal computer editing
programs and connection cords.With the assistance of our integrated help screens, you
can sit comfortably in the living room and tailor Mosaic to fit your specific needs.
Personalization features include:
•A learning feature that uses our proprietary learning capability, allowing a user to
add a function from another remote control, assign it a special key, label that key,
and place it on the screen of their choice.
•Up to 21 macro keys that can be programmed with up to 32 independent user-
defined keystrokes each.
•Our patented Key Mover, which allows keys to be copied from one device to anoth-
er, or to a different position in the same device mode.
•Our patented Key Magic, which provides you with an alternative way to add
functional codes to keys.
•Alpha/numeric and symbol keyboard that allows you to label and re-label keys
using letters, numbers, and a wide range of symbols.
COMPATIBILITY
Mosaic comes pre-programmed with the world’s largest and most efficient database of
infrared codes for device compatibility. It is further enhanced by UEI’s patented
upgradeability features:
8Chapter 1: Introduction
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 8

•Infrared code compatibility with the following devices: TV, Cable,VCR, Audio,
Accessories, Satellite, CD, Mini Disc,Amplifier, Misc. Audio, Tuner, Phono, DVD,
Audio Cassette, Home Automation, and Laser Disc.
•Electro-magnetic coupling that allows downloading by modem for an“in home”
consumer upgrade via telephone or PC speakers to ensure ongoing compatibility in
an ever-changing market.
ERGONOMIC DESIGN
Mosaic’s design has been optimized by using extensive consumer studies and includes
the following most sought-after features:
•Ideal shape and size case design provides comfortable one- or two-hand use.
•A large (4.6-inch diagonal) active touch-screen sensory area for easy viewing and
selection of keys.
•Four wide and narrow LEDs, distributed on Mosaic’s side and top, provide flexible
positioning of the remote control and a wide signal transmission range.
•Well-located hard keys for the most often used functions including, Volum e + /–,
Channel +/–,Mute,andaBack Light control.
•Stylus and housing provide an auxiliary method of key selection and convenient
stylus storage.
•Contrast control ensures quick adjustment for all lighting conditions.
ABOUT THIS GUIDE
ORGANIZATION
The remaining pages in this user’s guide are organized by chapter in a logical order,
starting with basic information on Getting Started and Setting Up Mosaic.Afterthat,
advanced topics are covered in Personalizing Mosaic and Mosaic System. To find detailed
information or procedures, use the Tab le of Cont e nt s (on page 2) to look up a desired topic.
CONVENTIONS
To help explain procedures and instructions, we use the following conventions:
continued on next page...
Product Summary/About This Guide 9
USER’SGUIDE
Mosaic UG rev2 8/30/01 9:07 AM Page 9

ABOUT THIS GUIDE
CONVENTIONS (CONTINUED)
SOFTWARE MENUS
Mosaic software menus are shown in an italic typeface.An example follows:
The Device Selection Strip provides device selection.
SOFTWARE/HARDWARE COMMANDS
The instructions require the user to tap a soft key or to press a hard key to perform a
certain action. Their labels are CAPITALIZED, as shown in the following example:
1. Tap on the DEVICE SETUP key.
NOTES
Supplemental information is indicated as a “NOTE”and is shown in italics, and some-
times it is denoted as “IMPORTANT”in bold italics for emphasis, as follows:
NOTE: If none of the codes work, try using the search method to set up the device (see page 27).
IMPORTANT: Tapping on RESET will completely erase all user-programmed settings,
including learned functions, macros, device setup, and downloaded codes.
10 Chapter 1: Introduction
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 10

Chapter 2:
Getting Started
OVERVIEW
This chapter provides instructions for installing batteries and shows you how to use
Mosaic’s basic functions.You’ll need to complete these sections before moving onto
Chapter 3: Setting Up Mosaic.
ABOUT BATTERIES
The Mosaic Touch Screen Control Device is powered by four (4) AA alkaline batteries
(not included). In the near future, Universal Electronics plans to offer a version that
uses rechargeable NiMH batteries with an optional recharging station.
INSTALLING BATTERIES
1. On Mosaic’s back side, push the tab and lift off the battery cover.
2. Obtain four (4) new AA alkaline batteries. Match the + and –marks on the batteries
to the + and –marks in the battery case, then insert the new batteries, as shown on
the next page.
continued on next page...
Overview/About Batteries 11
USER’SGUIDE
Mosaic Rear
Push Tab
Mosaic UG rev2 8/30/01 9:07 AM Page 11

ABOUT BATTERIES
INSTALLING BATTERIES (CONTINUED)
3. Align the cover’s keys with the opening’s holes and press the cover back into place.
The tab should click when the cover is locked.
4. If the batteries are inserted correctly, the MosaicWelcome screen will be displayed,
followed by the Device screen. After 20 seconds of inactivity, the LCD screen will
turn off to conserve battery life.
NOTES: If the screen seems too dark or light, adjust the Contrast Control (see page 15).
12 Chapter 2: Getting Started
MOSAIC
Mosaic UG rev2 8/30/01 9:07 AM Page 12

LOW-BATTERY INDICATOR
Whenever batteries need replacement, the Battery Low message will stay on in the top
portion of the Device screen:
At this point, only the control functions will work and all of Mosaic’s device set up and
personalization parameters will be disabled to prevent accidental loss of any entered
commands should the batteries run out.
NOTE: As an additional low-battery warning, Mosaic will emit a beep sound (even if the sound is
turned off; see “Chapter 5: Mosaic System-Sound Control”on page 79).
Simply replace the batteries as soon as possible and Mosaic will be restored to its full
functionality, complete with your favorite settings.
About Batteries 13
USER’SGUIDE
Low Battery
Indicator
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR
CBLTV VCR
THEATERSetup
|| Battery Low ||
Mosaic UG rev2 8/30/01 9:07 AM Page 13

HOW TO USE MOSAIC
As you study this section, use your Mosaic to get a basic understanding of how it
functions. Once you feel comfortable knowing how to use the controls and screens,
proceed to the next chapter to set up your new remote control.
LOCATIONS OFCONTROLS AND CONNECTIONS
MOSAIC FRONT VIEW
14 Chapter 2: Getting Started
MOSAIC
LED
(for Visual Confirmation)
VOLUME
Up/Down
MUTE
On/Off
Touch Screen
(Soft Keys)
(Hard Keys)
BACKLIGHT
On/Off
CHANNEL
Up/Down
Mosaic UG rev2 8/30/01 9:07 AM Page 14

MOSAIC REAR VIEW
How To Use Mosaic 15
USER’SGUIDE
Phono Jack
(for future
computer
connection)
Stylus
and
Housing
IR Signal
Emitters
Piezo Speaker
(for Audio
Confirmation)
Contrast
Control
(for
Touch Screen)
Battery
Cover
Tab
(to release
Battery Cover)
IR Learning
Eye
Mosaic UG rev2 8/30/01 9:07 AM Page 15

HOW TO USE MOSAIC (continued)
USING THE HARD KEYS
The most-often used remote control functions are assigned to hard keys (located along
Mosaic’s right edge –see the illustration on page 14).After selecting a device on the
Device Selection Strip (see next page), use the hard keys as follows:
•Press VOL+ (or VOL–) to raise (or lower) the volume level of the selected device.
•Press M to mute the volume of the selected device. Press it again to restore volume.
•Press CH+ (or CH–) for the next higher (or lower) channel of the selected device.
•Press the Backlight key to turn on the LCD backlight for enhanced viewing in a
dark room. The backlight will come on each time you use the touch screen and stay
on for 15 seconds after last inactivity. Press it again to turn it off.
NOTE: Using the backlight will drain the batteries at a faster rate.
USING THE TOUCH SCREEN
Mosaic features a Touch Screen that responds to touch commands, whether you use the
supplied Stylus or your finger tip. Each time you tap on the screen, you’ll see the LED blink
and hear a beep tone, which serve as visual and audio confirmation of your command.
16 Chapter 2: Getting Started
MOSAIC
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR
CBLTV VCR
THEATERSetup
Mosaic UG rev2 8/30/01 9:07 AM Page 16

On the following four pages, you’ll learn how the Touch Screen is organized and how to
select a device and control its functions.
TOUCH SCREEN ORGANIZATION
The Touch Screen uses two types of screen formats –(remote control) Device Screens
and (programming) Setup Screens, as shown in an example below.
On a Device Screen, the screen is divided into three main parts:
•The upper portion contains general functions like Setup,Home Theater,andPage
Arrows (Navigation). These topics will be covered in later chapters (see Tab le of
Contents on page 2).
•The Device Selection Strip provides device selection. Three devices are shown at a
time from a recirculating list of up to 15 devices by using the left/right scroll
arrows. When a device is selected, the device key becomes highlighted and its
remote control keys are dynamically generated according to the parameters imple-
mented by the manufacturer’s remote control code.
•The lower portion contains the device’s universal remote control keys and is
accessed on one or more pages by using the Page arrows.
On a Setup Screen, the screen lists programs in a menu format that allows you to set up
devices, personalize Mosaic with favorite settings, or set up Mosaic’s system.
continued on next page...
How To Use Mosaic 17
USER’SGUIDE
DEVICE SETUP
PERSONALIZATION
SYSTEM
SETUP
Welcome to Setup!
What would you like to configure?
Esc ?
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR
CBLTV VCR
THEATERSetup
Example Device Screen Example Setup Screen
General
Functions
Pages
Device
Selection
Strip
HelpPrevious
Screen
Remote
Control
Keys
Setup
Menus
Mosaic UG rev2 8/30/01 9:07 AM Page 17

HOW TO USE MOSAIC
USING THE TOUCH SCREEN (CONTINUED)
SELECTING A DEVICE
1. Tap on the Touch Screen once, anywhere on the screen, to activate the display. If
needed, adjust the Contrast Control (see page 15) for best viewing.
NOTE: When Mosaic is not in use, the LCD screen will turn off after a preset time to conserve
battery life. When activated, Mosaic remembers and displays the last-used screen or menu.
2. Point Mosaic at the device you want to control.
3. Using the Device Selection Strip, tap on the desired device key (e.g., VCR). If needed,
tap on the left/right scroll arrows to display other recirculating device choices. The
selected device will become highlighted, as shown in the example below.
NOTE: As a default factory setting, the Device Selection Strip will show only three devices.
To add up to 12 more devices, see “Chapter 3: Setting Up Mosaic”starting on page 21.
18 Chapter 2: Getting Started
MOSAIC
1 2 3
4 5 6
7 8 9
0
Prev Enter
TV/VID PWR TV/VID PWR
CBLTV VCR CBLTV VCR
THEATERSetup THEATERSetup
Tap on
next
device.
Current
active
device
Current
active
device
Tap on
scroll
arrow
to see
other
devices.
Mosaic UG rev2 8/30/01 9:07 AM Page 18
Table of contents
Other Mosaic Control Unit manuals
Popular Control Unit manuals by other brands

Siemens
Siemens Milltronics BW500 operating instructions

HeatLink
HeatLink StatLink SSP Series Operation and maintenance manual

KLINGER SCHÖNEBERG
KLINGER SCHÖNEBERG INTEC Series operating instructions

System air
System air IAM user manual

Satel
Satel SATELLINE-M3-TR1 user guide

Matrix
Matrix MI5466 MIAC ATmega Getting started guide