moss DESIGN MA User manual

MA
SIDE TABLE
Mallet or Hammer
Tool Required:
Tool Provided:
H1 Wooden Dowel
(8x35mm) x 4
H2 Allen Head Bolts
(Black) (6x70mm) x 4
T1 M4 Allen Key x 1
C1 Top Panel x 1
C2 Leg Frame x 1
C3 Leg Frame x 1
Placement and Maintenance
Your Ma Side Table is designed for indoor use on level
floors.
Furniture with hard lacquer, wax polish or painted surface
should be dusted with a dry cloth. Spillages should be wiped
up as soon as possible. Our furniture will endure most
temperatures in the home but it is best to avoid placing
furniture next to heat sources such as radiators or fires.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, visit our website
www.mossdesign.us
YNG TAL 14 / MFMT5 D:04.02.2021 / RN 000

Step 2 - Attach the dowels to leg frames.
Insert 4 wooden dowels H1 into their slots by using a mallet.
Step 3 - Place the leg frame on the top panel.
Place the leg C2 under the top panel C1 as shown below. Then insert 2 allen head bolts H2 into
their slots and tighten with the allen key T1.
C2
C2
C1
H1
H2
H2
T1
H1
C3

Step 4 - Attach the second leg frame.
Place the leg frame C3 on the leg C2 as shown below. Then insert 2 allen head bolts H2 into
their slots and tighten with the allen key T1.
Step 5 - End of the assembly.
Lift the unit to standing position carefully.
C3
H2
H2
T1
Moss Design is a trade name of a Colorado company Moss Furniture LLC
www.mossdesign.us