moss DESIGN MOSS User manual

MOSS
CHAIR
T2 Mallet x 1
Tool Provided:
H1 Allen Head Bolt
(Chrome) (M6x60mm) x8
T1 M4 Allen Key x 1
C1 Leg Frame x2
YNG TAL 14 / MFMT10 D:04.02.2021 / RN 000
C3 Cross Rail x 2
C2 Back Rest x 3
C4 Seat top x 1
Placement and Maintenance
Your Moss Chair is designed for indoor use on level floors.
Furniture with hard lacquer, wax polish or painted surface
should be dusted with a dry cloth. Spillages should be wiped
up as soon as possible. Our furniture will endure most
temperatures in the home but it is best to avoid placing
furniture next to heat sources such as radiators or fires.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, visit our website
www.mossdesign.us

Step 2 - Attach the first cross rail C3 to the leg frame C1 as shown below.
Step 3 - Attach the second cross rail C3 to the leg frame C1 as shown below.
C3 C1
C3

Step 4 - Attach the cross rails to the other leg frame C1 as shown below.
Step 5 - Install the first back rest C2 as shown below.
C1
C2
C2

C2
C2
Step 7 - Install the third back rest C2 as shown below.
Step 6 - Install the second back rest C2 as shown below.

C4
T1
H1
H1
Step 9 - Place the chair on the seat top. Install 8x allen head bolts H1 as shown below. Tighten them by
using allen key T1.
Step 8 - Place the seat top C4 on a stool.

Step 10 - Lift the unit to standing position carefully.
Moss Design is a trade name of a Colorado company Moss Furniture LLC
www.mossdesign.us