Motomaster 009-5079-6 User manual

Model no. 009-5079-6
TM/MC
Questions, problems, missing parts or for technical service? Before
returning to your retailer, please call Toll-free Hotline
1 888 942-6686.
IMPORTANT:
INSTRUCTION
MANUAL
Heavy-duty
Air Compressor

TM/MC
FEATURES
FEATURES
7 8
6
Compressor Switch
LED
Tire Gauge
12 V Adaptor
Work Light Switch
Carry Handle
Hose
1 Sports Needle, 2 Nozzles
5
12
3 4
1

Model no. 009-5079-6 / Contact us 1 888 942-6686
2
WARNING
WARNING
Please read the manual included with this
product carefully. Be thoroughly familiar with
the proper use of the unit.
Any misuse of the unit could cause property
or equipment damage and personal injury.
9
10
11
12
7
8
6
5
1
2
3
4
Do not overinflate products beyond
manufacturer’s recommendations.
Do not allow the compressor or its
components to get wet.
Do not leave the air compressor unattended
while in operation. Do not allow children to
handle or operate this compressor.
Do not use this product for purposes other
than its intended use.
Do not disassemble or tamper with this
compressor.
Do not use this compressor in extremely
hot conditions.
If the air compressor emits abnormal
sounds or overheats, turn it off immediately
and let it cool off for minimum 30 minutes.
Inspect air compressor before use. If
cracked, broken or damaged parts are
found, have them repaired or replaced by
a qualified technician.
Never expose the air compressor to rain,
frost or temperatures above 30 oC (86 °F)
or below -30 oC (-22 °F).
Never use on people or animals.
Make sure the cord is not exposed to hot
objects, oil or sharp edges.
Warning! For your own safety, you should
only use accessories and parts specified
in the instructions, or recommended for
use by the manufacturer. Use of
accessories and other parts that are not
mentioned in the instructions may cause
an increased risk to the user of the air
compressor.
Warning
Do not over-inflate objects. Over-inflation could cause damage and/or personal
injury. Always stay with the air compressor while in use. Allow air compressor
to cool for 10 minutes after 10 minutes of continuous operation. Read instructions
before use.
Please keep this manual on file for future
reference. First check contents of the box
to ensure all parts are included and
undamaged.

TM/MC
3
OPERATION
5
3
4
2
1
1
2
3
4
5
7
1
2
3
6
Roll out the 12 V cord and connect the
12 V adaptor to the outlet.
Screw the thread connection onto
tire’s valve stem.
Operate the air compressor by
pressing the compressor switch (1)
until the desired pressure is reached.
(Press ‘I’ to turn on the compressor
and press ‘O’ to turn it off.)
Press the work light switch (2) for
visibility in the dark. (Press ‘I’ to turn
on the LED and press ‘O’ to turn it off.)
Remove the thread connection from
the tire and disconnect the 12 V car
adaptor.
Note: To avoid over-inflation of tires,
please check the recommended car
tire pressure in the vehicle owner’s
manual. For bicycle tires, please
check the tire marking.
OPERATION
Inflating a car tire and bicycle tire
Inflating sporting equipment
(e.g. basketballs) or party balloons
Roll out the 12 V cord and connect the
12 V adaptor to the outlet.
Screw the ball/balloon adaptor into
the thread connection.
Insert the ball/balloon adaptor into the
valve of the object to be inflated.
Operate the air compressor by
pressing the compressor switch (1)
until the desired pressure is reached,
or the object is fully inflated. (Press ‘I’
to turn on the compressor and press
‘O’ to turn it off.)
Press the work light switch (2) for visibility
in the dark. (Press ‘I’ to turn on the LED
and press ‘O’ to turn it off.)
Pull ball/balloon adaptor from the
inflated object’s valve and unscrew
ball/balloon adaptor from the thread
connection.
Disconnect the 12 V adaptor from outlet
and store the 12 V cord in the
compartment area.
Note: If a pressure reading is required
during inflation, the built-in pressure
gauge will provide an estimated
reading only.
It is suggested you inflate according to
the PSI below:
5-20 PSI: Football, Volleyball, Life Ring
20-40 PSI: Car Tire
40-60 PSI: Basketball

4
Model no. 009-5079-6 / Contact us 1 888 942-6686
3
2
1
FUSE REPLACEMENT
FUSE REPLACEMENT
SPECIFICATIONS
Model #: 009-5079-6
Working voltage: 12 V DC
Max. pressure: 100 PSI
Cylinder diameter: 30 mm
Displacement: 25 L/min +/-10%
Fuse: 15 A
Accessories: two inflator nozzles and one sport needle
ENVIRONMENTAL PROTECTION
Do not dispose of this product in the usual household garbage at the end of its
life cycle; hand it over at a collection point for the recycling of electrical and
electronic appliances. The symbol on the product, the instructions for use or the
packing will inform about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material
recycling or other forms of re-utilization of old appliances, you are making an important
contribution to protect our environment.
To replace the fuse in the plug, twist off the upper cover.
Remove the faulty fuse and insert a new one.
Twist the cover back on the plug.
*Please call our toll-free helpline 1 888 942-6686 for a replacement fuse if necessary.
This MotoMaster product carries a one-(1)-year warranty against defects in workmanship
and materials. This product is not guaranteed against wear, breakage or misuse. Should this
product become defective within the stated warranty period, return it to the store with proof
of purchase, and it will be replaced or repaired free of charge.
Made in China
Imported by MotoMaster Canada Toronto, Canada M4S 2B8