manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Motorline professional
  6. •
  7. Measuring Instrument
  8. •
  9. Motorline professional MFE Owner's manual

Motorline professional MFE Owner's manual

Other manuals for MFE

1

Other Motorline professional Measuring Instrument manuals

Motorline professional BEWEATHER Use and care manual

Motorline professional

Motorline professional BEWEATHER Use and care manual

Motorline professional MFE User manual

Motorline professional

Motorline professional MFE User manual

Popular Measuring Instrument manuals by other brands

Powerfix Profi 278296 Operation and safety notes

Powerfix Profi

Powerfix Profi 278296 Operation and safety notes

Test Equipment Depot GVT-427B user manual

Test Equipment Depot

Test Equipment Depot GVT-427B user manual

Fieldpiece ACH Operator's manual

Fieldpiece

Fieldpiece ACH Operator's manual

FLYSURFER VIRON3 user manual

FLYSURFER

FLYSURFER VIRON3 user manual

GMW TG uni 1 operating manual

GMW

GMW TG uni 1 operating manual

Downeaster Wind & Weather Medallion Series instruction manual

Downeaster

Downeaster Wind & Weather Medallion Series instruction manual

Hanna Instruments HI96725C instruction manual

Hanna Instruments

Hanna Instruments HI96725C instruction manual

Nokeval KMR260 quick guide

Nokeval

Nokeval KMR260 quick guide

HOKUYO AUTOMATIC UBG-05LN instruction manual

HOKUYO AUTOMATIC

HOKUYO AUTOMATIC UBG-05LN instruction manual

Fluke 96000 Series Operator's manual

Fluke

Fluke 96000 Series Operator's manual

Test Products International SP565 user manual

Test Products International

Test Products International SP565 user manual

General Sleep Zmachine Insight+ DT-200 Service manual

General Sleep

General Sleep Zmachine Insight+ DT-200 Service manual

Sensa Core Lacto Spark user manual

Sensa Core

Sensa Core Lacto Spark user manual

VOLTCRAFT UTS-1980 operating instructions

VOLTCRAFT

VOLTCRAFT UTS-1980 operating instructions

EBCHQ 94915 Operation manual

EBCHQ

EBCHQ 94915 Operation manual

Balluff BIP LD2-T017-01-EP-S4 Series user guide

Balluff

Balluff BIP LD2-T017-01-EP-S4 Series user guide

Pulsar IMP Lite Series instruction manual

Pulsar

Pulsar IMP Lite Series instruction manual

ETCR 6800 user manual

ETCR

ETCR 6800 user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

MFE
A
A
B
A
EN
• Power supply 36Vdc/24Vac
• Consumption 50mA
• Distance 12 meters
• Working Temperature -25°C ~ +65°C
• Relay Capacity “Volt-free contacts”
• Protection grade IP54
• Polarization filter This feature prevents reflections caused by reflective objects.
Red Orange Green Signal strength
No signal
Low
Medium
High
TECHNICAL CHARACTERISTICS
LEDs
FIXING THE PHOTOCELL01.
OPERATION/PROGRAMMING MANUAL
60mm
115mm
53mm 38mm
96mm
OPEN THE PHOTOCELL
01 • Place the photocell base in the desired location so that the power cable passes through the hole
in the base.
02 • Mark the location of the 3 fixing holes and drill the holes.
03 • Secure the photocell with suitable bushings and screws.
04 • Connect the wires to the circuit board (wiring diagram image).
05 • Turn on the photocell without placing the photocell cover.
INSTALLING THE PHOTOCELL
Recommended
height:
mm
Junction
box
A-Hole for
screws
B-Hole for
cables
01 • Press the chrome part in the
areas indicated in the image. 02 • Slide the chrome part. 03 • Open the photocell by
separating the pieces from the
bottom part.
Max. Distance  meters
LEDs
+-COM NONC
1 2 3 4 5
36Vdc/24Vac
NC
COM
NO
EN
WIRING DIAGRAM
PHOTOCELL TUNING03.
C
C
LEDs
C
01 • If there is no signal, or if the signal is low, use the tuning screws to adjust the direction of the light
to increase the signal.
C-Tunning
screws
MIRROR PLACEMENT02.
01 • Place the mirror in front of the photocell, with the help of the light from the photocell.
02 • Make use of the indicator lights to set the best location for fixing the mirror.
03 • Mark the location of the fixing hole and drill.
04 • Secure the mirror with the appropriate bushing and screw.
The MFE is designed to protect any light disturbance. However, too much light
can cause unstable conditions with the sensor, such as; strong sunlight directed
or reflected exactly in the sensor's field of view. It is recommended to avoid such
installation.
The existence of ice, snow, fog or smoke can interfere with the operation of the
photocell.
Photocell Light