Motorola D670 Assembly instructions

tips & tricks
20
use with motorola D670 adapter
Listen to your music wirelessly from your iPod or iPhone
with the Motorola D670 Bluetooth Adapter:
1 Turn off any Bluetooth devices previously paired with
your headphones, then turn headphones off and on
to place in pairing mode (indicator light is steady
blue).
2 Turn on iPod or iPhone.
3 Connect your adapter to your iPod or iPhone.
The adapter indicator light flashes rapidly in blue for
a few moments, then begins to flash rapidly in red
and blue to indicate adapter is in pairing mode.
When your adapter and headphones are connected
and ready for use, the adapter indicator light

tips & tricks
21
changes to a slow blue flash. Music playing on your
iPod or iPhone is heard on your headphones.
4 To stop wireless music and disconnect from your
headphones, remove the adapter from the iPod or
iPhone.
5 To restart wireless music, reconnect the adapter to
your iPod or iPhone and turn on headphones.
To turn adapter on or off while connected to your iPod or
iPhone, press the button on the adapter for 3 seconds.
To enable hands-free functionality between your headset
and iPhone, pair your iPhone directly with you
headphones (for hands-free use) before connecting your
adapter.
Tip: The iPod or iPhone screen is activated when using
headphone music controls. Playtime may be extended by
minimizing the device's screen timer (see the device's
user manual for details).
Note: To clear the adapter’s device list and reset to
factory default condition, hold the adapter’s button while
attaching the adapter to the iPod or iPhone. Hold until the
adapter begins flashing rapidly in red and blue.