Motorola HS830 HANSFREE User manual

HS830
Helmet Adapter for
Wireless Module
Adaptateur de module
sans fil pour
casque protecteur
Adaptador de casco
para Módulo
inalámbrico
6809482A58-O

1
Export Law Assurances
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license.
All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2004.

2
Note: Before using this product, read
the Important Safety and Legal
Information included at the back of
your phone's user guide, and follow
its instructions.
Install your Helmet
Adapter
Action
1 Choose a clear space on the side
of your helmet where the adapter
fits.

3
2 Hold the adapter on the helmet in
the desired location to make sure
the microphone boom can reach
close to your mouth, and the
speaker and the speaker wire can
be routed inside the helmet and
placed by your left ear.
3 Use the cleaning pad to clean the
surface of the helmet where the
adapter will be attached.
Action
Helmet
Adapter
Microphone
Speaker

4
4 Peel the backing off the back of
the adapter and mount the adapter
to the helmet in the desired
location.
5 Peel the backing off the Velcro
®
on
the speaker. Place the speaker
inside the helmet where it will be
close to your ear.
Alternatively, insert the tie wrap
through the slots on the back of
the speaker and use the tie wrap
to strap the speaker inside the
helmet. You may have to push the
tie wrap through the liner of the
helmet.
Action

5
Installing the Wireless
Module
6 Point the microphone toward your
mouth.
For best performance, the side of
the microphone with the white dot
on it should be closest to your
mouth.
Action
1
Press the outside latch to open the
helmet adapter cover.
Action

6
2 Insert the HS830 Wireless Module
into your helmet adapter. Slide
your Wireless Module completely
onto the audio plug in the helmet
adapter.
3 Close the helmet adapter cover
completely to secure the Wireless
Module.
4 While wearing the helmet, point
the microphone boom close to
your mouth for best voice pickup.
Action
Wireless Module
Latch
Helmet Adapter
Microphone Plug

7
Pairing Your Wireless
Module and Phone
With the headset and phone near each
other:
Action
1
With the wireless module off,
press and hold the MFB until the
LED remains on (about 5
seconds).
2 Perform a device discovery from
your phone.
For details on device discovery
for your phone, refer to the
phone’s user’s guide.
When the scan is complete, your
phone displays the devices found.

8
3 Select Motorola HS830 from the
discovered devices list and
confirm following the on screen
prompts.
4 When prompted by the phone,
enter the passkey (
0000 )and
confirm to pair the wireless
module with the phone.
The device ID is now stored in
your phone’s memory.
Pairing is successful when your
wireless module indicator flashes
rapidly.
Action

9
Using Your Helmet
Adapter
Note: The use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey
the laws and regulations on the use of
these products.
You can activate call functions as
follows: