Motorola FOCUS360 User manual

QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide.
1. Setting up your digital video monitor
MODEL:
FOCUS360
Fasten the mounting plate
on the wall with the 4 Philips
head screws (provided).
A. Fixing the Outdoor Camera Unit Mounting Plate on
the wall
Place the 4 mounting slots of the camera
base on to the 4 catches on the mounting
plate. Make sure the unit sits firmly on the
mounting plate with the center holes of
the 2 parts lined up.
B. Hanging Outdoor Camera Unit on the
Mounting Plate
Plug the Outdoor Camera Unit's power
adapter into the extension cord socket
and then plug the power adapter into the
electrical outlet.
D. Connecting Power Supply for the Outdoor
Camera Unit
Fasten the unit to the
mounting plate at the
center hole with the
tamper-proof screw with
the wrench key provided.
C. Secure the Outdoor Camera Unit

WARNING:
STRANGULATION HAZARD – In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and
out of their reach. Never place camera or cords within a crib or near a bed. Secure the cord away from children’s reach. Never use extension cords with AC
Adapters. Only use the AC Adapters provided.
As with any electrical device, supervision of your pet's usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing,
we strongly recommend you keep this and all other electrical devices out of its reach.
Connect the small plug of
the power adapter to the
camera unit and the other
end to the electrical outlet.
Only use the enclosed
adapter (5.9V DC/1000mA).
E. Connecting power supply for the Indoor
Camera Unit
Insert the wire tab of the
rechargeable battery pack into
the contact slot as shown and fit
the battery pack into the
compartment.
F. Installing the battery pack for the Monitor Unit
Black Red
Connect the small plug of the
power adapter to the monitor
unit and the other end to the
electrical outlet.
Only use the enclosed adapter
(6V DC/500mA).
H. Connecting power supply for the Monitor Unit
Small cross head or
Flat end screwdriver
G. Fastening the cover for the Monitor Unit

2. Basic operation of the keys
3. General Information
If your product is not working properly...
1. Read this Quick Start Guide or the User’s Guide.
2. Contact Customer Service:
Monitor unit
VPPOWER ON-OFF /
VIDEO button
Press and hold to switch the unit on/off. Press to turn the LCD display on/off.
+- UP/DOWN buttons Press to tilt the camera upward or downward. Press to adjust menu settings.
<> LEFT/RIGHT buttons Press to pan the camera left or right. Press to access different menu options.
MMENU button Press to open menu options or exit.
OOK button Press to confirm a selection.
>> QUICK SCAN button Press to double the pan/tilt speed of the Outdoor Camera Unit.
TTALK button Press and hold to talk to your Indoor Camera Unit.
Indoor Camera Unit
ON/OFF switch Push the power switch to the right to switch the unit on. Push the power switch to the left to
switch the unit off.
US and Canada 1-888-331-3383
Email: [e-mail]
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this
product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
respective owners. © 2013 Motorola Mobility LLC. All rights reserved.
Printed in China
Version 6.0