Motorola ME4064 Series User manual

User Guide
BLUE COLOR LCD
DIGITAL CORDLESS PHONE
Model ME4064 Series
Digital 1.8 GHz
WITHINTEGRATEDDIGITAL
ANSWERING DEVICE

1
Welcome
Congratulations on your purchase of a Motorola product!
Your MotorolaTelephone at a glance:
Digital Answering Machine
Arrow For Navigating /
Redial / Menu
Incoming Call
Flashes
Battery Charge
Indicator
Call key
* Key
Handsfree
Number
Paging
#/Key Lock
Pause/Voice
Message key
Base
Power/End Call
Headset Jack
Right Soft key(SKR)
Display
Handset
INT key
Redial/Flash
Left Soft key (SKL)
Play

2
Welcome
For product-related questions, please refer to the Warranty section.
Please retain your original dated sales receipt for your records. For warranty service of
your Motorola Product, you will need to provide a copy of your dated sales receipt to
confirm warranty status.
Complies with the essential protective requirements and objectives of the EC's R&TTE
Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC
Copyright © 2004 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation or
adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content
from time to time without obligation on the part of Motorola to provide notification of
such revision or change. Motorola provides this guide without warranty of any kind,
either implied or expressed, including but not limited to, the implied warranties of mer-
chantability and fitness for a particular purpose. Motorola may make improvements or
changes in the product(s) described in this manual at any time.
MOTOROLA, the Stylized M Logo, and PhoneWrap are registered in the U.S. Patent and
Trademark Office. All other product or service names are the property of their
respective owners.

3
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important Safety Instructions . . . . . . . . . .6
Installation Guidelines . . . . . . . . . . . . . . . .7
Technical Amendments . . . . . . . . . . . . . . .8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . .9
Package Contents . . . . . . . . . . . . . . . . . . . .9
Setting up the Base Station and
Charger Unit . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting the Base Station and
Mains Adaptor . . . . . . . . . . . . . . . . . . . . . .10
Connecting the Charger Unit . . . . . . . . .11
Preparing the Handset(s) . . . . . . . . . . . .11
Inserting and Charging the Batteries . . .11
Low Battery Warning. . . . . . . . . . . . . . . .
12
Attaching a Headset . . . . . . . . . . . . . . . . .12
Technical Data . . . . . . . . . . . . . . . . . . . . .12
Telephone Features . . . . . . . . . . . . . . . . . .13
Control Buttons . . . . . . . . . . . . . . . . . . . .14
Display Icons . . . . . . . . . . . . . . . . . . . . . . .15
Menu Icons . . . . . . . . . . . . . . . . . . . . . . . .15
Display Backlight . . . . . . . . . . . . . . . . . . .15
Menu Structure . . . . . . . . . . . . . . . . . . . . .16
Navigating the Menu . . . . . . . . . . . . . . . .16
Using theTelephone . . . . . . . . . . . . . . . . .17
Switching the Handset On / Off . . . . . . .17
Making External Calls . . . . . . . . . . . . . . .17
Handset Range . . . . . . . . . . . . . . . . . . .17
Direct dialing . . . . . . . . . . . . . . . . . . . . .18
On-hook dialing . . . . . . . . . . . . . . . . . . .18
Using the Handsfree Speakerphone . . .18
Make a handsfree call . . . . . . . . . . . . . . .18
Switch to handsfree during a call . . . . .19
Taking Calls . . . . . . . . . . . . . . . . . . . . . . .19
Handset is in the Base Station/
charger (auto-answer) . . . . . . . . . . . . .19
Handset is not in the
Base Station/charger . . . . . . . . . . . . . . .19
Prefix Dialing . . . . . . . . . . . . . . . . . . . . .19
Dialing from the Phone Book . . . . . . . . .20
. . . . . . . . .20
Calling with More than One Handset . .20
Making Internal Calls . . . . . . . . . . . . . . . .21
Receiving Internal Calls . . . . . . . . . . . . . .21
Transfering/Forwarding a Call to
another Handset . . . . . . . . . . . . . . . . . . .21
Teleconference . . . . . . . . . . . . . . . . . . . . .22
Paging Handsets . . . . . . . . . . . . . . . . . . .22
Muting the Microphone . . . . . . . . . . . . .22
Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Shortcut Keys . . . . . . . . . . . . . . . . . . . . . .23
Using the Menu . . . . . . . . . . . . . . . . . . . .24
Contents
Access a Call Waiting Line / Holding
and transferring calls (PABX)
Changing the Handset Volume 23
. . . . . . . .

4
Contents
Phone Book Menu . . . . . . . . . . . . . . . . . .24
Storing Entries . . . . . . . . . . . . . . . . . . . . .24
Storing Number in standby mode . . . . .26
Searching Number in Phone Book . . . . .26
Phone Book Groups . . . . . . . . . . . . . . . .27
Speed Dial Numbers . . . . . . . . . . . . . . . .28
Check Phone Book Capacity . . . . . . . . . .29
Emergency Call Numbers . . . . . . . . . . . .30
Area Code . . . . . . . . . . . . . . . . . . . . . . . . .30
Call Log Menu . . . . . . . . . . . . . . . . . . . . .31
Viewing the Calls Log . . . . . . . . . . . . . . .31
Saving Call Log Number to Phone Book 33
Deleting a Call Log Number. . . . . . . . . . .34
Deleting All Call Log Entries . . . . . . . . . .34
Timer Menu . . . . . . . . . . . . . . . . . . . . . . . .34
Set Date andTime . . . . . . . . . . . . . . . . . .34
Set the Alarm . . . . . . . . . . . . . . . . . . . . . .35
Silence the Alarm When it Sounds. . . . .36
Handset Settings Menu . . . . . . . . . . . . . .36
Changing the Ringer Melody . . . . . . . . .36
Changing the RingerVolume . . . . . . . . .37
Switching the Ringer On/Off . . . . . . . . . .37
Pre Fix Setting . . . . . . . . . . . . . . . . . . . . .38
Call Barring . . . . . . . . . . . . . . . . . . . . . . . .39
MessageWaiting . . . . . . . . . . . . . . . . . . .40
Changing the Display Wallpaper . . . . . .41
Changing the Display Language . . . . . .41
Changing the Display Contrast . . . . . . . .42
Switching Key Tones On/Off . . . . . . . . .42
Switching Auto Answer On/Off . . . . . . . .43
Giving the Handset a Name . . . . . . . . . .43
Selecting the LCD Mode . . . . . . . . . . . . .44
Resetting your Handset to the
Default Settings
Handset default Settings . . . . . . . . . . . . .45
Base Setting Menu . . . . . . . . . . . . . . . . . .46
Changing the Ringer Melody . . . . . . . .46
Switching the Base Ringer On/Off . . . . .46
Priority Call Alert . . . . . . . . . . . . . . . . . . .46
Changing the Dial Mode . . . . . . . . . . . . .47
Registering Additional Handsets . . . . . .48
De-register a Handset . . . . . . . . . . . . . . .49
Select a Base to Use . . . . . . . . . . . . . . . .49
Changing the PIN Code . . . . . . . . . . . . . .50
Changing the FlashTime . . . . . . . . . . . .50
Resetting to Default Settings . . . . . . . . .51
Function Menu . . . . . . . . . . . . . . . . . . . . . .51
WalkieTalkie Mode . . . . . . . . . . . . . . . . .52
Contents
. . . . . . . . . . . . . . . . . . . .44
General
Switch Answering Machine ON / OFF
(preset to ON)
Clock Setting
Outgoing Announcement
Answering Machine Operation
How to Record Your Announcement
Recording Announcement A1
(Announce Only set to OFF)
Recording Announcement A2
(Announce Only set to ON)
54
56
56
. . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . .
. . . . . . . . .
. . . . . . . . . .
54
54
54
55
56

5
Contents
. . . . . . . . . . . . . . . . . . .
57
. . . . . . . . . . . . . . .
. . .
. . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
Contents
Quick Reference
Phone Book
Calls log
Timer Menu
Handset Settings
Base Settings
Function
Warranty
Remote Operation
Set "Announce Only"
On / Off (preset to OFF)
Turn Audible Message Alert On / Off
Set Number of Rings to Answer
Recording a Memo
Listening to Your Messages
Message Playback
Deleting Messages
Important Imformation
Voice Prompt Language selection
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering Machine
. . . . . . . . . . . . . . . . . . . . . . . . . . .
58
58
58
58
59
59
60
61
61
62
63
64
64
65
67
69
70
72

Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk of
fire, electric shock and injury to persons or property:
Reduce risk of fire and shock by:
1. Keep all slits and openings of the phone unblocked. Do not set the phone on a
heating register or over a radiator. Ensure that proper ventilation is provided at the
installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
4. Do not allow anything to rest on the power cord. Place the power cord so that it will
not be walked on.
5. Never insert objects of any kind into the product slits as that may result in fire or
shock.
6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
7. Do not disassemble this product. If service or repair work is required, contact the
Warranty Service phone number found in the back of this user 's guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
10. Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas line.
6
Important Safety Instructions

7
Important Safety Instructions
Unplug this cordless phone immediately from an outlet if:
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or water. Do not retrieve the handset or base
until after you have unplugged the power and phone from the wall.Then retrieve
the unit by the unplugged cords.
The product has been dropped or the cabinet has been damaged.
The product exhibits a distinct change in performance.
Installation Guidelines
1. Read and understand all instructions and save them for future reference.
2. Follow all warnings and instructions marked on the product.
3. Do not install this product near a bath tub, sink or shower.
4. Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your dealer
or local power company.
5. Do not place this product on an unstable cart, stand or table.This product may fall,
causing serious damage to the product.
6. Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work to restore the product to normal operation.
7. Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents
to clean this phone.

8
Important Safety Instructions
8. Use only the power supply that came with this unit. Using other power supplied
may damage the unit.
9. Because cordless phones operate on electricity, you should have at least one phone
in your home that isn't cordless, in case the power in your home goes out.
10. To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near a TV, microwave oven, or VCR.
Technical Amendments
These Operating Instructions are issued for information purposes.
Their content is not subject of a contract.
All indicated data is merely nominal values. The described equipment and options
may differ depending on requirements which are specific to each country.
This device is dedicated to be used in the analog public switched telecomunication
network (PSTN).

9
Installation
Package Contents ME4064-1 ME4064-2 ME4064-3 ME4064-4
Single Pack Twin Pack Triple Pack Quad Pack
Base station 1 1 1 1
Handset 1 2 3 4
Mains Adaptor 1 2 3 4
Telephone Line Cord 1 1 1 1
Rechargeable Batteries 2 4 6 8
(type AAA rechargeable)
Charger Unit 0 1 2 3
User's Guide 1 1 1 1
Please check the contents of the package carefully. If something is missing
or has become damaged in transit, you should NOT use the telephone.
In such a case you should return to the dealer with your sales receipt or contact the
Motorola's distributor directly.(For details, please refer to theWarranty section.)
Note: Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location near to a mains
power socket. Make sure that the location is stable and flat and that the surface is
non-slip. Make sure that all cables can be routed so as to prevent people tripping over
them. Furthermore, avoid placing the base station and charger unit too close to other
electronic appliances such as microwaves, PCs or HiFis, for example.
Do not expose the base station and charger unit to direct sunlight or allow them to
become wet.They should not be set up in rooms which are subject to
condensation or corrosive steam or a high concentration of dust (e.g. cellars,
garages or conservatories).The room temperature must be between 0 c and 35 c.

10
Installation
Connecting the Base Station and Mains Adaptor
1. Plug the telephone line cord into the base station socket.
2. Route the cord underneath the base station towards the back.
3. Plug the other end into the telephone wall socket.
4. Connect the mains power supply.
The base station does not have a power
switch. Only use the mains adaptor supplied
with your phone.

11
Installation
n
Connecting the Charger Unit
Plug the mains adaptor into the wall socket .
The charger unit is now ready to use.
Preparing the Handset(s)
Inserting and Charging the Batteries
If the batteries are inserted incorrectly
the handset will not operate and there is
also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours,
without interruption. If possible, only take the handset out of the base station when
charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to
connect the telephone line cord after charging so as not to be disturbed by any
incoming calls.
Open the battery compartment, by pushing downwards on the cover. Insert the 2 x AAA
(600mAh/1.2V) Ni-MH re-chargeable batteries supplied, observing the correct polarity.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON- RECHARGEABLE
BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO
THE UNIT AND VOID THE WARRANTY.

12
Installation
LOW BATTERY WARNING
If the handset batteries are low and need charging you will hear a beep every 30
seconds and the icon will be displayed.
Attaching a Headset
Note: A headset is not included as standard.
You can connect a headset to your handset.
Lift the small rubber flap on the right side of the handset to reveal the
headset socket. Connect the jack plug into the jack socket.
With a headset connected the handset microphone and recei
ver
loudspeaker are switched off and all communication is via the headset
earpiece and mouthpiece.
Technical data
Receiver impedance : 32 ohm
Microphone impedance : 2.2K ohm
Receiver output power : 20mW
Plug : 2.5mm headset jack plug
Microphone sensitivity : -42dBV/pa

13
Features
Telephone Features
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
Digital Enhanced Cordless
Telecommunication (DECT)
4 Grey Scale Colour display with icons
10 Polyphonic ringtones
Phone book for 80 names, each with 3
contact numbers
3Wallpapers (exclusive to Motorola)
Handsfree/Headset operation
Caller ID* function with 40 name/number
call log
9Display languages
WalkieTalkie Function between Handsets+
20 Last number redial
Alarm
Microphone mute
Low battery warning tone
Keypad lock
GAP compatible - Operation of up to 6
handsets with ME4064 base Use ME4064
handset on up to 4 bases
Teleconference
Internal, free communication
between handsets
Priority call alert+
Message waiting alert
Emergency call number
9 Speed dial numbers
Separate ringtones for internal/
external/group and page calls
5 Earpiece volume levels
5 Ringer volume levels and ringer mute
5 Base ringtones
Pre-fix dialling
Display clock
Handset name
Call duration on display
Automatic call answering on/off
Key input tone on/off
Paging function from base station
to handset
Programmable number barring
Up to 100 hours standby
Up to 10 hours continuous talk time
Recall/Pause/Hold
Tone and pulse dialling modes
+ More than one handset required.
* User must subscribe to service via network provider
DECT : Digitally Enhanced Cordless Telephone - Standard for cordless telephones.
GAP : Generic Access Profile - Standard for the Interoperation of handsets and base
stations from other manufacturers.
Digital Answering Machine with 40 minutes
recording time, 59 messages capacity
+
+
Caller ID* on Call Waiting
(dependent on network)
Backlight LCD with power save mode

14
Control Buttons
Control Buttons
1
2
3
4
5
6
7
9
10
11
12
13
14. Volume down (-) - Press to decrease loudspeaker volume.
15. Volume up (+) - Increase loudspeaker volume.
16. Delete key - Use to delete messages/memos.
17. Mailbox indicators
Flash when new messages are stored. The display shows
the number of messages.
15
16
17
18
21
22242526 23 20
18. Stop - Stops message playback. Ends recording.
Use to store messages and memos into the mailboxes.
19. Next key - During message playback,
press to skip forward to the next message.
20. Play
21. Replay/previous key
During message playback, press to replay the current message
or press twice to play the previous message.
22. Record/Memo key
Use to record your outgoing message or memo.
23. Menu key - Press to open the answering machine menu.
24. Charging indicator
Illuminates when the handset is charging in the base station.
25. Page (Find Handset) key
Press to locate a missing handset/page all handsets registered
to the base.
26. Call indicator
Flashes when you have incoming calls.
14
19
Play
8
1. Display
2.
3. Right Soft Key (SKR)
Press from standby to access the Phone Book.
Press to go back to the previous menu.
Press to delete an incorrect character/digit.
4.
Up Key
Use to scroll up through the menu/display options.
Shortcut key to access Missed Calls Log.
5.
Down Key
Use to scroll down through the menu/display items.
Shortcut key to access Received Calls Log.
6.
External Call Key
Use to make an external call.
7.
Handsfree/Speaker Key
Use to activate/de-activate
8.
OFF Key
Use to end a call.
Press to return to standby mode.
Press and hold to switch the power on/off.
9.
Pause/Voice Message Key When storing a number,
press and hold to enter a pause.
Shortcut k ey to acti vate voice mail in standby mode.
10.
11.
INT Key
Press to make an intercom call.
Use to put an external call on hold.
12.
* Key
Press to enter an asterisk.
Shortcut key to switch from
Pulse to DTMFdialing mode.
#/Keypad Lock Key
Press to enter a hash.
Shortcut key to lock/unlock the keypad
handsfree.
13. Left Soft Key (SKL)
Press from standby to view
the menu.
Press to select and confirm
display items.
Use to mute/unmute the
microphone.
In games mode, press to
pause/play.
Redial/Flash Key
Access a Call Waiting Line / Hold and
transfer calls when connected to PABX

15
Display Icons
Display Icons
Signal icon Flashes if the handset moves out of communication
range with the base.
Key lock icon Keypad lock is active.
Line in use icon Indicates that the line is in use.
Alarm icon Alarm is set.
Ring icon External ring volume is set to on.
Battery icon Shows the battery charge level.
No ring icon External ring volume is set to off.
No Line icon Base not connected with PSTN.
Mic mute icon Microphone is muted.
Message waiting icon Indicates that there is message waiting.
Menu Icons
Phonebook icon Phonebook in use.
Call log icon Call log in use.
Timer icon Time being set.
Handset settings icon Used to access handset settings.
Base settings icon Used to access base settings.
Function icon Used to indicate other available functions.
Display Backlight
The backlight on your handset display comes on when any key is pressed.The light
remains on for 15 seconds after the last button press if you selected 'power save
mode' or for 30 seconds if you selected 'extended mode'. The backlight also comes
on when you receive an incoming call (and goes out 3 seconds after the call ends)
and when the alarm time is up (the light comes on for 5 seconds).

16
Menu Structure
Menu Structure
Phone book
1. Search
2. Add
3. Group
4. Speed Dial
5. Check
6. Emergency Call
7. Area Code
Call log
1. Missed call
2. Received call
3. Dialled call
4. Delete
Timer
1. Clock
2. Alarm
Handset settings
1. Ring Type
2. Ring Volume
3. Ring On/Off
4. Pre Fix
5. Outgoing Call Bar
6. Message Waiting
7. Wallpaper
8. Language
9. Contrast
10. Key Tone
11. Auto Answer
12. Handset name
13. LCD Mode
14. Default
Base settings
1. Base RingTone
2. Base Ring On/Off
3. Priority Call Alert
4. Dial Mode
5. Register
6. De-register
7. Select Base
8. System PIN
9. Flash Time
10. Default
All Function
1. Walkie Talkie
Navigating the menu
In standby mode:
Press the SKL key to open the main menu and display the first menu option.
When you access a sub-menu the relevant menu icon will be displayed.
Press the or key to scroll through and display all the available sub-menus.
Press the SKL key to select the currently displayed option. Or
Press the SKR
key to go back to the previous display.

17
Using the Telephone
Using the Telephone
Note: If the handset is in the base station or charger unit, only the key and
key will function.
Lift the handset out of the base station/charger unit for use.
Switching the handset On/Off
When the handset is put in the base station/charger unit it switches on automatically
and charges up.
Allow the batteries to charge for 16 hours without interruption before first use.
To switch the handset off:
1. In ON mode, press and hold the
key for 2 seconds.
To switch the handset on:
1. In OFF mode, press and hold the
key for 2 seconds.
Making External Calls
There are two ways to dial a number: direct dialling or on-hook dialling.
Whenever the line is in use the icon is displayed.
If another internal handset is already engaged on an external call, the icon will be
displayed. No further calls can be made until this call is ended.
Handset range
If the handset moves out of communication range with the base station,
the display will show Out of Range.

18
Using the Telephone
Direct dialling
1. Press the key and wait for the dialling tone.
2. Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the
display until 3 seconds after the call is ended.
The call timer format is HH:MM:SS.
3. Press the key to end the call.
On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the SKR key.
3. Press the key. The displayed number is dialled.
4. To end the call, press the key.
Hands-free Mode
There are two methods with which to have telephone conversations in hands-free mode ,namely
using direct dialing or by switching over during the call.
Direct dialing
1. Dial the call number and press the key to start dialing.
2. Carry out the conversation.
3. Press the key to end the call.

19
Using the Telephone
Taking calls
When an external call is received, all registered handsets ring and the LCD backlight
will be on during ringing. The display shows Incoming call.
The green incoming call light on the base flashes.
Note: If you have subscribed to caller ID, the caller's name or number will be shown
(if available from the network).
Handset is in the base station/charger (auto-answer):
If auto-answer is set to on, the line will be automatically connected when you lift the
handset from the base/charger.
1. Lift the handset to answer the call.
Note: If auto-answer is set to off, lift the handset and press the key or the key
to answer the call.
Handset is not in the base station/charger:
1. Press the key or the key to answer the call.
Prefix Dialling
When prefix dialling is set to ON, the prefix number that you set will be dialled out
first whenever you make an external call. The prefix can be a number up to 5 digits.
You can use the prefix memory to store an area code that you frequently use, for
example 0207 or 08457, to save you dialling it each time you make a call.
Switching During a Call
1. Dial the call number and press the key to start dialing.
2. Carry out the conversation.
3. Press the key to switch hand-free mode on or off.
4. Press or key to adjust the handset volume.
5. Press the key to end the call.