Motorola MC9500-K - Win Mobile 6.1 806 MHz User manual

2
FEATURES
1
8
4
7
1
2
15
20
24
13
14
17 19
21
18
23
5
9
12
10
11
3
16
22
6
23
KEYPADS
3 Insert the Battery
GETTING STARTED
9 Decode LED
10 Receiver
11 Battery Status LED
12 WAN Radio Status
LED
6 Microphone
7 Scan Button
8 Touch Screen
(with screen protector)
1 Up/Down Volume Button
2 Scan Button
3 Function Keys
4 Power Button
5 Keypad
Note 1: To warm boot the MC9500-K, press and hold the Power button
for five (5) seconds.
To cold boot the MC9500-K, press and hold the 1, 9 and Power button.
13 Speaker
14 Camera and Flash
15 Interface Connector
16 Stylus
17 Scan Exit Window
(see Data Capture Options)
21 Headset Connector
22 Handstrap
23 Battery Release Buttons
24 Battery
18 IrDA Window
19 Action Button
20 Scan Button
Quick Start Guide
1 SIM Card Installation (MC9596-K Only)
LED Notifications
1. Press the Power button to suspend the
MC9596-K.
2. Wait for red Decode LED to turn on and
then turn off.
3. Unhook handstrap.
4. Press battery release buttons and
remove battery.
5. Remove SIM cover using flathead
screwdriver.
6. Slide SIM card holder to the left.
7. Lift card holder.
8. Insert SIM card into SIM holder.
NOTE :
The proper position of the SIM card—the card
connector (i.e., gold area) should be facing
down with the beveled edge facing up.
9. Lower the SIM card holder down.
10. Slide SIM card holder to the right to lock
into place.
11. Reinstall SIM cover.
12. Reinstall battery.
13. Connect handstrap.
14. Warm boot the MC9596-K.
Battery Status:
Decode:
Slow blinking amber: Healthy battery charging
Slow blinking red: unhealthy battery charging
Solid green: Fully charged healthy battery
Solid red: Fully charged unhealthy battery
Fast blinking amber: Charging error
Red: Scanning active
Green: Good decode
Red (after Power button
press): Safe to remove
battery
WAN Radio Status:
Flashing green:
WAN activity
5 Charge the Battery
Four Slot Battery ChargerSingle Slot Spare Battery Charger
Four Bay Cradle (with optional guide cups)
4 Charge the MC9500-K
Single Bay Cradle
MC9500-K Battery Status LED
*
24 hr*
MC9500-K
Telephony Numeric
Alpha Numeric Alpha Primary
Calculator Numeric
2 microSD Card Installation
1. Press the Power button to suspend
the MC9500-K.
2. Wait for red Decode LED to turn on and
then turn off.
3. Unhook handstrap.
4. Press battery release buttons and
remove battery.
5. Remove SD card cover using
flathead screwdriver.
6. Slide microSD card holder to
the left.
7. Lift card holder.
8. Insert microSD card into holder.
NOTE :
The proper position of the microSD card —
the card connector (i.e., gold area) should
be facing outward with the notched edge
facing away.
9. Lower the microSD card holder
down.
10. Slide card holder to the right
to lock into place.
11. Reinstall SD card cover.
12. Reinstall battery.
13. Reconnect handstrap.
14. Warm boot the MC9500-K.
Battery Status
Decode
WAN Radio
Status Press the Battery Status button.
Charge Level Indicator displays
approximate battery level.
Battery Indications
Charge Level Indicator
Battery Status Button
Fully
Charged
Partially
Charged
Un-
healthy
Charge Level Indicator displays approximate
battery level.
Battery Indications
Fully
Charged
Partially
Charged
Un-
healthy
Charge Level Indicator
Battery Status Button
Battery Status Indicator
Battery Status LED (in charger)
Slow Blinking Amber = Healthy battery charging
Slow Blinking Red = Unhealthy battery charging
Solid Green = Healthy battery fully charged
Solid Red = Unhealthy battery fully charged
Fast blinking Amber = Charging error
Battery Status LED
Solid Green = Healthy battery
Solid Red = Unhealthy battery
Battery Status LED
Slow Blinking Amber = Healthy battery charging
Slow Blinking Red = Unhealthy battery charging
Solid Green = Healthy battery fully charged
Solid Red = Unhealthy battery fully charged
Fast Blinking Amber = Charging error
It is recommended that this
product be charged for 24
hours before the first use to
ensure that the internal
battery is fully charged.
Stand-alone Mode
Press the Battery Status button.

Motorola, Inc.
One Motorola Plaza Holtsville, New York 11742-1300, USA
http://www.motorola.com/mc9500
Magnetic Stripe Reader
Exit Window
OPTIMUM SCANNING AND IMAGING ERGONOMIC CONSIDERATIONSACCESSORIESBATTERY REMOVAL
Laser Scanning
Scanning/Imaging
AVOID EXTREME
WRIST ANGLES
DATA CAPTURE OPTIONS
GPS Information
Screen Protector
Motorola recommends the use of a screen
protector to minimize wear and tear. Screen
protectors enhance the usability and durability
of touch screen displays. Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface
with tactile feel
• Abrasion and chemical resistance
• Glare reduction
An initial screen protector is already applied to your MC9500-K. Contact
your local account manager or Motorola, Inc. for more information and
purchasing details. Part number: KT-122010-01R Screen Protector 3/pk.
Not using a screen protector can
affect your warranty coverage.
MC9500-K Quick Start Guide
Imaging
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are
registered in the U.S. Patent and Trademark Office. All other product or service
names are the property of their respective owners.
© Motorola, Inc. 2009
72-118504-01 Rev. A — July 2009
• Acquiring satellite signals may take a few minutes. It is best to be
outside and have a clear, unobstructed view of the sky.
• Obtain a satellite fix before moving.
• Shutdown GPS application when not in use.
Camera Lens
When using the GPS feature of the MC9500-K:
Laser scanner or Imager
Camera Decode
Camera Photo
1. Launch a bar code reading application on
the MC9500-K.
2. Position the MC9500-K toward the bar
code.
3. Press the Scan button.
4. In the image window align the red
target over the bar code. When the
MC9500-K decodes the bar code the
target turns green.
1. Tap Start > Programs > Pictures &
Videos > Camera.
2. Point the MC9500-K at an object.
3. Press the Enter button.
4. Hold MC9500-K still until “Shutter
Sound” is heard.
CABLE CONNECTION
Single Bay USB Cradle
USB/Charging Cable
Four Bay Charge Only Cradle
Four Slot Battery ChargerSingle Slot Battery Charger
Vehicle Cradle Auto-Charge Cable
Vehicle Battery Charger
AVOID BENDING
AVOID REACHING
Taking breaks and task rotation recommended
High Scanning
Use a ladder
Low Scanning
Create a Partnership
3
4
Install ActiveSync®
1
Communicate
with Host
2
Download ActiveSync
®
4.5 or
higher from
http://www.microsoft.com and
follow the instructions to install
ActiveSync onto the host
computer.
COMMUNICATION
Enter Your PIN
After installing the SIM card activate your mobile service
connection. In most cases, SIM cards are preset with a PIN (Personal
Identity Number), provided by your service provider.
1. Press the Power button to turn on the MC9596-K.
2. Tap Start > Phone.
3. Enter the PIN from your service provider.
4. Tap Enter.
Follow the
on-screen ActiveSync instructions to establish
a connection between the MC9500-K and the host
computer.
Alternate left and
right knees
Alternate left and
right hands
1. Press Power button to suspend the MC9500-K.
2. Wait for the red Decode LED to turn on and then turn off.
3. Unhook handstrap.
4. Press the two battery release latches. The battery ejects slightly
from the device.
5. Remove battery from device.
Four Bay Ethernet Cradle
Release Button
For more information visit:
(shown with optional guide cups)