Motorola ME4052 Series User manual

Access a CallWaiting Line /
Holding and transferring calls (PABX)
Changing the HandsetVolume

Caller ID on CallWaiting
(dependent on network)
*
*
+
+
* user must subscribe to the network's caller id service.
+ more then one handset required.
Programmable call block
Operation with 2 standard AAA
re-chargeable batteries
Standards

Press the or key to adjust the handset volume.

Note: If several handsets are registered on the base station and a call should be put on
hold or transferred, press the key instead of .
Access a CallWaiting Line / Holding and transferring calls (PABX)
When on an external call, press key to access a CallWaiting Line when you hear
the call waiting prompt signal. Press key again to toggle between the two calls.
3. Press key again if you would like to take back the call, or to transfer the call.
When on an external call (PABX line)
1. Press key to put the call on hold.
2. Dial the number of the extension.

EXT Call / / again to get to first line
/ Extension Number /
Access CallWaiting Line
Hold,Transfer call (PABX)

Press and hold Page key of Base for 2 seconds