Movisens EdaMove 4 User manual

movisens GmbH, Karlsruhe, Germany E-Mail: supp[email protected]
EdaMove 4
ED and Physical ctivity Sensor Quick Start Guide
Eda
M
ove
4
Quick Start Guide
, Version
04.09.2018
Welcome
Thank you for choosing the EDA and Physical Activity
Sensor EdaMove 4 from movisens. This sensor
represents the latest technology for the mobile
monitoring of galvanic skin response and physical
activity in everyday life.
Description of the Sensor
Featuring an integrated Bluetooth Smart nterface, the
EdaMove 4 expands researchers’ options by allowing
integration with the experience sampling platform
movisensXS.
Comfortably worn on the wrist, the EdaMove 4
sensors electrodes attach to the palm via adhesive
electrodes. A multi-colored LED provides visual
feedback on the sensors operation.
Scope of pplication
The EdaMove 4 captures galvanic skin response and
physical activity (i.e. skin conductance level (SCL), skin
conductance responses (SCR), 3D Acceleration, Angular
Rate, Barometric Air Pressure…) and other secondary
parameters of a test subject.
t’s been designed and tailored for research and
scientific applications with a 4 week recording capacity.
Software Installation
Before starting a measurement, you have to install the programs on the USB stick.
SensorManager: Configures the sensor, starts a measurement
and downloads the data from the sensor
UnisensViewer: Views and preprocesses the stored data
Data nalyzer: Analyzes the stored sensor data (30 days free trial version)

movisens GmbH, Karlsruhe, Germany E-Mail: supp[email protected]
EdaMove 4
ED and Physical ctivity Sensor Quick Start Guide
Eda
M
ove
4
Quick Start Guide
, Version
04.09.2018
Handling

Charge
the Sensor
Connect the sensor to a USB port until the LED is blinking green.
During charging, the status LED is blinking blue.

Start
SensorManager
Connect EdaMove 4 to the PC, click on “Start Recording” and
configure the measurement parameters.

ttach the Sensor
Fix the adhesive electrodes at the wrist band
and place them at the palms. Don’t connect the
sensor to a PC during measurement, this will stop it!

Start
SensorManager
After the measurement, connect the EdaMove 4 to the PC, click on
“Save Data” and enter the required information.

Start
UnisensViewer
Click on “Show data” directly after storing the data.

Start
DataAnalyzer
Select the desired analysis output to calculate secondary parameters
or to generate reports.
Please read the User Manual for further details !
Configure and start
the
measurement
Measure
Read out and store
the data
Analyse the data
SensorManager
UnisensViewer
SensorManager
DataAnalyzer
UnisensViewer
results: .csv, .pdf, .xlsx
View and preprocess
the data
Prepare the sensor