Movon MDSM-7 User manual

MDSM-7 Installation Guidebook

2
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
CONTENTS
1General Information ..................................................................................................................5
2Product ......................................................................................................................................6
2.1 Specification .....................................................................................................................................6
2.2 Product components ......................................................................................................................6
2.3 Parts description..............................................................................................................................7
2.3.1 Main Unit ..................................................................................................................................7
2.3.2 Dip Switch Description ...........................................................................................................7
2.3.3 MFB (Multi-function button) Description ..........................................................................8
2.3.4 LED Description........................................................................................................................8
2.3.5 Power cable/3P..................................................................................................................... 10
2.3.6 Peripheral Component Interconnect Box (PCI Box)...................................................... 10
2.3.7 Vibration unit (Optional)..................................................................................................... 10
2.3.8 Video Out Cable (Optional) ................................................................................................ 11
2.3.9 FMS Cable (Optional)........................................................................................................... 11
2.3.10 Contactless CAN Reader(Optional)........................................................................... 11
2.3.11 Ethernet cable(Optional)............................................................................................ 11
2.3.12 Micro SD Card (Consumable)..................................................................................... 11
2.4 Micro 5 pin USB Cable (Optional for Calibration)...................................................................12
3Installation.............................................................................................................................. 13
3.1 System Connection .......................................................................................................................13
3.2 MDSM-7 installation position.....................................................................................................14
4PC Calibration ......................................................................................................................... 15
4.1 Driver Setup (ONLY SUPPORTS WINDOWS OS) ......................................................................15
4.2 Calibration Setup...........................................................................................................................15
4.2.1 Access MDSM-7 Calibration page via PC......................................................................... 15
4.2.2 Calibration.............................................................................................................................. 15
4.2.3 DSM Setup ............................................................................................................................. 18

3
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4.2.4 DVR Setup .............................................................................................................................. 19
4.2.5 Miscellaneous Settings........................................................................................................ 20
4.2.6 Calibration Complete........................................................................................................... 20
4.3 System Initialization......................................................................................................................21
4.4 Firmware Update...........................................................................................................................21
4.5 Driver Registration (Face ID set up)...........................................................................................22
4.5.1 Edit the driver ID ......................................................................................................................... 23
4.6 Ethernet Setting.............................................................................................................................23
4.7 Onvif Setting...................................................................................................................................24
5Recognize MDSM-7 in computer (Install RNDIS Driver).......................................................... 24
5.1 Computer with Windows XP, 7, 8, 8.1 ......................................................................................24
5.2 Computer with Windows 10 .......................................................................................................24

4
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
Version
No
Version
Date
Contents
Written
Note
1
1.0.0
19.07.17
Initial Release
Kevin
2
1.0.1
19.08.22
Calibration pages modification
Kevin
3
1.0.2
19.09.18
Face ID setting modification
Kevin
4
1.0.3
19.09.19
Update the expression, pictures etc.
Kevin
5
1.0.4
19.11.01
Include the error code / Onvif settings
Dominic
6
1.0.6
19.11.22
Camera setting updates
Dominic
7
1.0.7
19.12.16
MFB, Error Code
Julia
8
1.0.8
20.02.10
Calibration, driver registration, etc.
Julia
9
1.0.9
20.02.19
Changed the orders and added comment
Dominic
10
1.1.0
20.03.10
Amendment based on firmware version
0.2.36 ( snapshot, activation speed, etc. )
Jeff
11
1.1.1
20.03.26
Update the face ID information
Dominic

5
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
1General Information
MDSM-7 installation requires wiring electric lines from vehicles. Please contact your local
distributor or authorized installers for installation. MOVON will hold no liability of any damage
occurred during installation proceeded by users, or unauthorized installers.
MDSM-7 is developed to give only warnings to drivers. The final decision to maneuver or
control shall be made by drivers themselves. Furthermore, MDSM-7 is not capable of providing
100% detection rate. Please ensure that keep eyes forward while driving rather than only
relying on MDSM-7.

6
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
2Product
2.1 Specification
Item
Description
Main Processor
ARM Cortex A7 Quad
Sub Processor
ARM Cortex M0
(for illuminator & Camera Control)
Camera
Effective
Pixels
720 X 480
View
Angle
42˚(D) 30˚(H) 29˚(V)
Video
Video Out
CVBS 1Vp-p 75Ω
Operating Temperature
-20~70˚C
Storage Temperature
-40~85˚C
2.2 Product components
Main unit
Power cable 3P
PCI Box
Hexagon wrench
4 x Screws
Micro SD card
(Consumable)
Contactless
CAN Reader
(Optional)
FMS Cable (RS-232)
(Optional)
Vibration unit
(Optional)
Ethernet cable
(Optional)

7
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
2.3 Parts description
2.3.1 Main Unit
2.3.2 Dip Switch Description
Settings
Switch
Description
Sensitivity
1
On: Level 3
Off: Level 2(Defualt)
Operating
speed
2-3
OFF –OFF (Default)
60kmh / 40mph
OFF - ON
40kmh / 25mph
ON - OFF
20kmh / 15mph
ON - ON
Test mode
Volume
4
ON: Level 4
OFF: Level 2(Default)
MFB
Press the button → Volume changes in a loop
(Current volume → .. → 2 → 3 → 4 → 1 → 2 →,..)
5PIN connector
Ethernet Out Port
MFB button
Camera lens
LED 1
360°Rotation
(Wrench Hole)
Cradle
(Screw/ Tape)
Speaker
Dip Switch
SD Card Slot
Microphone
LED 2

8
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
2.3.3 MFB (Multi-function button) Description
①Camera angle settings (External screen is required)
Press the button until you get 5 beeps. Then, you will enter camera angle setting
mode. Check the screen, if your face is placed within the large square, both LED1
and LED2 are off and stay for 3 seconds. Then LED1 turns to green and it will
reboot automatically and apply new angle settings.
②Volume settings
Click the button once to increase the volume. Each click increases 1 volume level.
It starts from current volume and changes in a loop from 1 to 4. After volume 4, it
goes to level 1. (Current volume.. -> 3 -> 4 -> 1 ->2 ->3 ->…).
2.3.4 LED Description
①Warning status alarm
②Parameters of warnings
Type of
warning
Level 3
Level 2 (Default)
Level 1
Time
Angle
Time
Angle
Time
Angle
Drowsiness
1.5S
Left : 25˚
Right : 25˚
Top : None
Down : 15˚
2S
Left : 30˚
Right : 30˚
Top : None
Down : 20˚
2.5S
Left : 35˚
Right : 35˚
Top : None
Down : 25˚
Distraction
3S
Extra warning: 5S
4S
Extra warning: 6S
5S
Extra warning: 7S
Phone
2S
3S
4S
Smoking
Yawning
3S
3S
3S

9
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
③Error Status
Error Description
LED Color
Possible Cause
Camera Error
LED 1: Yellow
LED 2: Red
Camera component error
GPS Error
LED 1: Yellow
LED 2: Blue
GPS component error
Other problems
LED 1: Yellow
LED 2: Green
SD Card or Video recording error
CAN communication error
* RS232 output data
: MDSM-7 transmits Error code in a RS232 output data format. Please see MDSM-7’s output
protocol document.

10
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
2.3.5 Power cable/3P
※Power cable to the vehicle.
Color
Label
Connection Description
Red
IGN
To ignition (ACC) power line
(Turns off when key is at OFF)
Yellow
Power
Battery power line
Black
GND
To ground source
* Please ensure that is connected properly to ground,
or it could damage the vehicle and MDSM-7.
2.3.6 Peripheral Component Interconnect Box (PCI Box)
Peripheral Component Interconnect Box (PCI Box) is to connect the cables and
accessories.
PCI BOX LED status table
Color
status
Yellow
In case of wiring only constant power
Green
In case of wiring constant power and IGN power
2.3.7 Vibration unit (Optional)
* NOTE: Vibrator gender cable is necessary and also this function needs to be
enabled during calibration process.

11
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
2.3.8 Video Out Cable (Optional)
Video out cable is to transmit analog video to another device using RCA connector.
2.3.9 FMS Cable (Optional)
FMS cable is to transmit DSM event data to another FMS (Fleet Management System)
through RS-232.
2.3.10 Contactless CAN Reader(Optional)
2.3.11 Ethernet cable(Optional)
: Transmit the video through Ethernet Port. (RJ45)
2.3.12 Micro SD Card (Consumable)
* Micro SD card is consumable product. Only first 3 months will be guaranteed. It is
recommended to format micro SD card regularly and replace it when it cannot be
recognized in MDAS.
** Micro SD card speed shall be above Class 10 and it is recommended to use MLC type.

12
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
File size
SD card storage
Max. Recording time(Normal mode)
20Mb
16G
Approx. 7 hours 20 minutes
32G
Approx. 14 hours 40 minutes
* Caution
Depending on your environment, actual recording duration and SD card lifespan may vary.
For stable performance, it is recommended that you format the memory card every 2-3
weeks. Formatting will delete all data in the card. If you want to keep the data, please
back up in advance. If MDAS fails to format the card more than twice, please try
formatting using PC. It may happen to some SD cards. When you extract the card, please
2.4 Micro 5 pin USB Cable (Optional for Calibration)
* NOTE: You can use a common USB cable that supports data transmission.
For calibration with Windows OS computers. Before the calibration, please install RNDIS
driver, first. (See Chapter 4.1)

13
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
3Installation
3.1 System Connection
①Place MDSM-7 on the dashboard (refer to chapter 3.2)
②Connect Main cable to the PCI box.
③Connect he power cable to PCI box and vehicle.
Power cable to the vehicle.
Color
Label
Connection Description
Red
IGN
To ignition (ACC) power line
(Turns off when key is at OFF)
Yellow
Power
Battery power line
Black
GND
To ground source
* Please ensure that is connected properly to ground,
or it could damage the vehicle and MDSM-7.
* There are different ignition powers, it is recommended to use an ignition power
(IG1) that does not drop power shortly when the engine turns on
④After installation, do calibrate referring to Chapter 4.
Main 16P
Status
LED
Vibration unit
Video out RCA
Power cable
Can reader
FMS RS232
Main unit
K-Line
Fuse
Debugger

14
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
3.2 MDSM-7 installation position
①Please place MDSM-7 in front of the driver for the best performance.
②Distance should be 80-100cm from the eyes of the driver to MDSM-7 camera.
③If MDSM-7 cannot be located in the center, it is recommend to locate within right
and left side 15°.
④Please make sure the camera should be lower than driver’s eyes level, about 15-30°
⑤The camera should face the driver’s face directly and MDSM-7 should be fixed with
4pcs screws.
⑥After fixing cradle, installer has to adjust the camera pitch angle.
⑦After adjusting the camera's pitch angle, fix it using hexagon wrench.

15
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4PC Calibration
4.1 Driver Setup (ONLY SUPPORTS WINDOWS OS)
* NOTE: Before you connect or start calibration, please install RNDIS driver first.
4.2 Calibration Setup
4.2.1 Access MDSM-7 Calibration page via PC
①Connect MDSM-7to PC using Micro USB cable with 5 pins.
②Power on MDSM-7. If you hear repeated beep sound, this means MDSM-7 is
properly connected to computer.
③Activate the browser and enter into http://20.0.0.1:18087/ to access MDSM-7
calibration page. Google Chrome is recommended.
④If you see the page below, please select language you want and sign in using
following information
‐ID: admin
‐Password: 1234
4.2.2 Calibration
4.2.2.1 Select Speed Type
①GPS Speed setting
GPS antenna is embedded on MDSM-7. If GPS work correctly, detected is
shown. If GPS doesn’t work for 5 mins, Fail is shown.

16
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
②CAN Speed setting
MDSM-7 can get speed through CAN as well.
MDSM-7 only recognizes encrypted CAN data from our Database site;
http://info.mdas.co.kr
Please download can file from the DB and upload to system.
4.2.2.2 Verify Speed Signal
You can check the speed data is coming correct by test drive.
If there is a deviation, please use the following correction method.
Please click the “Correction” button when you drive at 40km/h (24mph). Then,
MDSM-7 will set new speed automatically.

17
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4.2.2.3 Camera Setting
①Place your face inside the guide box. The face box should fit inside the
guide box to proceed to next step.
②Wait 3 seconds to complete and save camera setting.
③When the setting is complete, the page will change like below and the unit
will make multiple beeps.
Height option
If the installer/technician is relatively tall or short compared to male
average height of the country, please choose “tall” or “short” option. Then,
the guide box will move up or down accordingly. Please fit your face inside
the adjusted guide box.

18
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4.2.3 DSM Setup
①ON/OFF: Enable Drowsiness, Distraction, Phone, Smoking, Yawning.
②Sound Type: Check the warning sound and select the one you prefer.
③Vibrator: Enable vitration function. (On / Off)
④Sensitivity: Set the sensitivity on a scale of 1 to 3. As the level gets higher, it
gets more sensitive. Yawning warning will generate when yawning for 2
seconds.
⑤DIP switch on unit: Enable DIP switch on MDSM-7’s unit.
⑥Sound Level: Control the warning sound level on a scale of 1 to 4.
⑦Activation Speed:
- Set the Activation Speed ( 15 ~ 60Km/h ≒10 ~ 40mph). The functions will be
acticvated when the vehicle is faster than this speed.
- In Test mode(0Km=0mph), the functions are activated regardless of the
speed.
- If you select Others, you can input the activation speed in the below box.
Note that the input range is between 5Km and 100km.

19
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4.2.4 DVR Setup
①Time: Set the date and time.
Please click the button, the time information on PC is saved
automatically
②Voice Recording: Enable Voice recording function (On / Off).
③Gravity sensor sensitivity: Set the sensitivity of event recording. Scales of 1 to
5 and the higher number is more sensitive.
④Dring log with video: Enable Driving log with video (On / Off).
⑤Record Ratio: Set the Recording ratio (Continuous : G-sensor: DSM).
You can allocate the recording capacity of SD card from 0:0:10 ~ 10:0:0.
Mode
Description
File name
Folder
Continuous
Record continuously. Create
file every 1 miute in a loop
Date_Time
(20190601_063903_NOR)
NOR
G-sensor
Record when G-sensor detect
events for 30 seconds.
Date_Time
(20190601_063903_EVT)
EVT
DSM
Record when DSM events
detected for 30 seconds
Date_Time_DSM event type
(20190601_063903_DSM)
DSM

20
MOVON Corporation. 6Fl., Hyunjuk Bldg., 7 Selleung-ro 94-gil, Gangam-Gu, Seoul, 06161 Korea
Tel: [phone] Fax: [phone] www.movon.co.kr
4.2.5 Miscellaneous Settings.
①Set the baudrate to transmit data through RS-232
(Off/ 9,600/19,200/57,600/115,200)
②Set Video out format (NTSC / PAL)
2-1: Choose if you want to display the dots on display
③Set the K-Line Baudrate (Off/ 9,600/19,200/57,600/115,200)
④Repeat alarm when camera covered
•if it is ON, alarming sound is generated every 3 minutes.
⑤Snapshot transmittion
•If it is ON, snapshot is transmitted out when drowsiness alert is occurred.
4.2.6 Calibration Complete
①Click “Complete”button to finish Calibration setup. Then MDSM-7 will be
rebooted automatically.